(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Indexing Plungers
-
Indexing Plungers - Lever type, metric coarse thread.
MISUMI
•Type: Lever Type
•Overall Length: Standard
•Mounting Method: Screw-In
•Locking Mechanism: Lever Type
•Operation Knob: Provided- Volume Discount
- inCAD Components
Days to Ship: Same day Show Stock Products
-
Indexing Plungers - Knob type, selectable tip, metric fine thread.
MISUMI
Alteration of tip shapes makes it possible to use the product separately depending on the current application demand.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Fastening and Positioning Pins.
HALDER
The positioning clamping pin allows fast clamping, fastening, adjusting, changing and securing of workpieces, plates, fixture systems etc.
- CAD ：
- 3D
Days to Ship: 10 Days -
Indexing Plungers - Knob type, compact, metric coarse thread.
MISUMI
As Compact As Possible. 2/3 of Conventional Products.
- Volume Discount
- inCAD Components
Days to Ship: Same day Show Stock Products
-
Indexing Plungers - Knob type, metric fine or coarse thread.
MISUMI
•Type: Standard Knob
•Overall Length: Standard
•Mounting Method: Screw-In
•Locking Mechanism: Without Locking Nose
•Operation Knob: Provided- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - Knob type with precision pilot pin.
MISUMI
•Type: Standard Knob
•Overall Length: Standard
•Mounting Method: Screw-In
•Locking Mechanism: Without Locking Nose
•Operation Knob: Provided- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - Lever type, metric fine thread.
MISUMI
•Type: Lever Type
•Overall Length: Standard
•Mounting Method: Screw-In
•Locking Mechanism: Lever Type
•Operation Knob: Provided- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - Aluminum knob type, short thread and metric fine thread.
MISUMI
•Type: Standard Knob
•Overall Length: Short
•Mounting Method: Screw-In
•Operation Knob: Provided
•Body Surface Treatment: Black Oxide- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - With mounting plate, selectable handle, PBX series.
NBK
Indexing plungers integrated with a mounting flange. Suitable for mounting to panel surfaces on equipment/devices, etc.
- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - With flange and pilot pin, PPLY series.
NBK
Precise positioning indexing plungers.
- Volume Discount
Days to Ship: 11 Days or more -
Indexing Plungers - Fine Thread, PXY Series.
NBK
The pin can be locked in its retracted position by pulling and rotating the knob 90 degrees. To unlock, pull the knob slightly and rotate it by 90 degrees. The built-in spring returns the pin to its origin.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - With selectable stroke, PLX series.
NBK
Two types of standardized stroke for each pin diameter. For indexing or positioning.
[Features]
- Two types of standardized stroke for each pin diameter (except for φ10 and φ12).
- For indexing or positioning.
- Pin is hardened (steel) or nickel-plated (stainless steel). Excellent abrasion resistance.
- If the threaded part is too long for the mounting surface, use the PXC indexing plunger collar instead.- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - Knob Type, Return Type, IP-1 Series.
Konishi
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Indexing Plungers - With/without knob, hex collar.
HALDER
[Features]
· For index holes.
· Use the distance collar (EH22120) to adjust the depth of the screw-in.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days or more -
Clamping Blocks - For indexers.
HALDER
[Features]
· Can be used for mounting external diameter screw M12, M16 and M20 index bolts, and for expanding their applications.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Indexing Plungers - Knob type, long, metric fine thread.
MISUMI
•Type: Standard Knob
•Overall Length: Standard
•Mounting Method: Screw-In
•Locking Mechanism: Without Locking Nose
•Operation Knob: Provided- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Accessories - Press fit indexing plunger knob.
MISUMI
•Type: Standard Knob
•Overall Length: Standard
•Mounting Method: Screw-In
•Body Material: Others- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Indexing Plungers - Without knob, for heavy load.
MISUMI
The most suitable knob for each purpose can be mounted.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - Compact, fine thread, PHY series.
NBK
Compact indexing plunger.
[Features]
- A compact indexing plunger.
- Pull the knob and rotate 30° to lock with the pin retracted.
- To unlock, pull the knob slightly and rotate 30°.
- Returns to its original position via internal spring action.
- Lock mechanism built into the knob.
- Overall length is the same as a PHX without a lock mechanism.
- Pin is nickel-plated for good abrasion resistance.- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - With selectable stroke, retracted position, PLY series.
NBK
Two types of standardized stroke for each pin diameter. Pull the knob and rotate 90° to lock with the pin retracted. To unlock, pull the knob slightly and rotate 90°. Returns to its original position via internal spring action.
- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - Lever type, fine thread, retracted position, PXVS series.
NBK
[Features]
- Stainless steel.
- Superior corrosion resistance.
- Turn the lever to control the pin insertion.
- Retractable into the body with a 180° turn of the lever.
- Lever can be locked with a notch machined in the main body.
- Ergonomic lever cap attached to the PXVS-B/BK.
- Nickel plating for good abrasion resistance.- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plunger - Knob Type, Short, IPSL Series.
Konishi
[Features]
· Pulling the knob and rotating it by 90° locks the product with the center pin in a retracted state.
· Returning the knob to its original position releases the lock and the center pin returns to its original position.- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plungers - Lever Type.
HALDER
[Features]
· For index holes.
· If the lever is rotated 180 degrees the pin retracts. The knob section can be used to maintain this state.
· The operating temperature range of the plastic cap is from -30 to +80°C.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Indexing Plungers - Flanged knob type, compact.
HALDER
[Features]
· For index holes.
· This index bolt is characterized by its small size, and is suitable for fixing this parts in place.
· On models with hold mechanisms, pull the knob and rotate 90 degrees to fix the pin in place in a withdrawn state using the notch.
· Operating temperature range is from -30 to +80°C.- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
HALDER
To be used for positioning and applying pressure, e.g. during painting and sandblasting.
- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Indexing Plungers - Push type.
MISUMI
•Type: Special Knob
•Overall Length: Standard
•Mounting Method: Screw-In
•Operation Knob: Provided
•Body Material: 1045 Carbon Steel- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Indexing Plungers - Lever type with status display.
MISUMI
The ON/OFF state can be visually recognized by the indication on the lever.
- Volume Discount
- inCAD Components
Days to Ship: 14 Days or more -
Indexing Plungers - With mounting plate.
MISUMI
•Type: Standard Knob
•Body O.D./Thread Dimension M (mm): 6
•Nose O.D. d Dimension (Ø): 6
•Length L (mm): 48
•Stroke Dimension S (mm): 6- Volume Discount
- inCAD Components
Days to Ship: 10 Days or more -
Indexing Plungers - Press fit without knob.
MISUMI
•Type: No Knob
•Overall Length: Standard
•Mounting Method: Press Fit
•Locking Mechanism: Without Locking Nose
•Nose Material: 440C Stainless Steel- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Indexing Plungers - No knob, light load.
MISUMI
•Type: No Knob
•Overall Length: Standard
•Mounting Method: Screw-In
•Locking Mechanism: Without Locking Nose
•Body Material: 12L13 Carbon Steel- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - Nylon knob type, short thread and metric fine thread.
MISUMI
•Type: Standard Knob
•Overall Length: Short
•Mounting Method: Screw-In
•Locking Mechanism: Without Locking Nose
•Operation Knob: Provided- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - Flanged knob type, metric fine thread.
MISUMI
The flanges enable the plunger to be adjusted to right or left.
- Volume Discount
- inCAD Components
Days to Ship: 10 Days or more -
Indexing Plungers - Knob type with threaded tip, metric fine thread.
MISUMI
The attachment can be mounted on the tip.
- Volume Discount
- inCAD Components
Days to Ship: 10 Days or more -
Indexing Plungers - With mounting plate, PBY series.
NBK
[Features]
· An indexing plunger with an integrated mounting flange.
· Suitable for mounting equipment and devices on walls etc.
·Pull out the knob and rotate 90° to lock with the pin in a retracted state.
·To unlock, pull the knob out slightly and rotate it 90°.
· Returns to its original position via the action of the integrated spring.
· For mounting, please use commercially available hex socket bolts, etc.
· Using slotted holes allows you to adjust the position after mounting.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - Lever Type, PDV series.
NBK
[Features]
- This index plunger has a lever that can be turned to insert or remove the pin.
Operation of the plunger is carried out by three types of movement.
Standard Models (PDV-A, PDV-AK)
Pin retracts into the body when the lever is rotated 90°
Force from the internal spring returns the pin to its original position when the lever is released
Holding Models (PDV-B, PDV-BK)
Pin does not retract when the lever is released at a position of 120°
Force from the internal spring returns the pin to its original position when the lever is rotated slightly in the opposite direction
Locking Models (PDV-C, PDV-CK)
Pin retracts into the body when the lever is rotated 120°
When the pin is retracted, the guide pin is locked inside the slot
Pin can be unlocked by slightly pulling on the lever while rotating it in the opposite direction
Force from the internal spring returns the pin to its original position when the lever is rotated slightly
PDV-A, PDV-B, and PDV-C has no lock nut and can be used to prevent loosening
PDV-AK, PDV-BK, and PDV-CK have lock nuts and can be used to fix pins in place- Volume Discount
Days to Ship: 10 Days or more -
Indexing Plungers - Knob Type, PDX series.
NBK
[Features]
· A new type of indexing plunger.
· Features a lock mechanism.
· The PDX-A/AK, with knob, have been standardized.
· For the PDX-A/AK, pin insertion is controlled via the knob.
· Turning the knob 90° clockwise after pulling it out allows the guide pin to fit into the slot, locking the unit with the pin retracted.
· To unlock, pull the knob out slightly and rotate it 90° counterclockwise.
· Returns to its original position via the action of the integrated spring.- Volume Discount
Days to Ship: 10 Days or more -
Indexing Plungers - Compact, PHX Series.
NBK
[Features]
- Compact indexing plunger.
- Metal part unexposed after mounting.
- Nickel-plated pin.
- Superior abrasion resistance.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - Short Thread Length, PSX Series.
NBK
Short type that can be mounted directly to a thin frame.
- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - With locking function, PYS series.
NBK
The pin can be locked in its retracted position by pulling and rotating the knob 90 degrees. To unlock, pull the knob slightly and rotate it by 90 degrees. The built-in spring returns the pin to its origin.
- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - With/without knob, fine thread, PXX series.
NBK
Indexing or positioning pin. Good abrasion resistance.
[Features]
- Indexing or positioning pin.
- New standards for [PXXS-S] and [PXXS-SK] with stainless steel knobs.
- Pin is hardened (steel) or nickel-plated (stainless steel). Excels in abrasion resistance.
- If the threaded part is too long for the mounting surface, use the [PXC] indexing plunger collar instead.
- Use a locking service for fixing indexing plungers.- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - Knob type, fine thread, PCX series.
NBK
[Features]
- A new type of indexing plunger.
- Pin usually retracted in the main unit.
- With lock mechanism.
- The knob-type PCX-A/AK and the key-type PCX-B/BK are standardized.- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - Knob type, flanged, PFX series.
NBK
[Features]
· A flanged type indexing plunger that is mounted using countersunk bolts and rivets etc.
· The long pin type PFX-H-A (long pin type) is ideal for mounting thick panels and frames etc.
· The pin has undergone hardening and offers excellent abrasion resistance.- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - Flanged knob type, retracted position, PFY series.
NBK
[Features]
· A flanged type indexing plunger that is mounted using countersunk bolts and rivets etc.
· The long pin type PFY-H-A is ideal for mounting thick panels and frames etc.
· Pull out the knob and rotate 90° to lock with the pin in a retracted state. · To unlock, pull the knob out slightly and rotate it 90°. · Returns to its original position via the action of the integrated spring.
· The lock mechanism is integrated into the knob. Therefore, the overall length is the same as that of the PFX, which does not have a lock mechanism.
· The pin has undergone hardening and offers excellent abrasion resistance.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - Knob type, fine/coarse thread, PMX series.
NBK
Simple structure index plunger.
[Features]
· Superior cost performance.
· For all pin diameters, coarse thread and fine thread are standardized.
· Can select main body material quality and whether or not to include a lock nut using the product code.
[Applications]
· For positioning workpieces.
· For attaching and detaching workpieces.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - Flanged knob type, PLX series.
NBK
[Features]
- Indexing plunger for accurate positioning.
- H7 pin diameter tolerance.
- G6 hole tolerance recommended for the mating side.
- Use with the positioning bushings for precise positioning.- Volume Discount
Days to Ship: 11 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Type |
| Locking Mechanism |
| Mounting Method |
| Overall Length |
| Body Material |
| All Stainless |
| Nose Material |
| Body O.D./Thread M(mm) |
| Stroke S(mm) |
| Nose Surface Treatment |
| Nose Heat Treatment |
| Nose O.D. d(Ø) |
| Length L(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | HALDER | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NBK | NBK | NBK | NBK | Konishi | HALDER | HALDER | MISUMI | MISUMI | MISUMI | NBK | NBK | NBK | Konishi | HALDER | HALDER | HALDER | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NBK | NBK | NBK | NBK | NBK | NBK | NBK | NBK | NBK | NBK | NBK | NBK |
| Product Series | Indexing Plungers - Knob type, selectable tip, metric fine thread. | Indexing Plungers - Knob type, compact, metric coarse thread. | Indexing Plungers - Knob type, metric fine or coarse thread. | Indexing Plungers - Aluminum knob type, short thread and metric fine thread. | Indexing Plungers - With mounting plate, selectable handle, PBX series. | Indexing Plungers - With selectable stroke, retracted position, PLY series. | Indexing Plungers - Lever type, fine thread, retracted position, PXVS series. | Indexing Plungers - Nylon knob type, short thread and metric fine thread. | Indexing Plungers - Knob type with threaded tip, metric fine thread. | Indexing Plungers - With/without knob, fine thread, PXX series. | Indexing Plungers - Flanged knob type, retracted position, PFY series. | Indexing Plungers - Knob type, fine/coarse thread, PMX series. | |||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship |
Same day
Show Stock Products |
Same day or more
Show Stock Products | 10 Days |
Same day
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 11 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days | 10 Days | 10 Days | 8 Days or more | 14 Days or more | 10 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 10 Days or more | 10 Days or more |
Same day or more
Show Stock Products | 10 Days or more | 10 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 11 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||
| Type | Lever Type | Standard Knob | - | Standard Knob | Standard Knob | Standard Knob | Lever Type | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob / No Knob | - | Standard Knob | Standard Knob | No Knob | Standard Knob | Standard Knob | Lever Type | Standard Knob | Special Knob | Standard Knob | Special Knob | Special Knob | Lever Type | Standard Knob | No Knob | No Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Lever Type | Standard Knob / Special Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob / No Knob | Standard Knob / Special Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob |
| Locking Mechanism | With Locking Nose | Without Locking Nose | - | Without Locking Nose | Without Locking Nose | Without Locking Nose | With Locking Nose | With Locking Nose / Without Locking Nose | None | With Locking Nose | With Locking Nose | None | None | - | - | Without Locking Nose | - | Without Locking Nose | With Locking Nose | With Locking Nose | With Locking Nose | With Locking Nose | - | - | - | - | With Locking Nose | - | Without Locking Nose | Without Locking Nose | Without Locking Nose | Without Locking Nose | Without Locking Nose | With Locking Nose | None / With Locking Nose | With Locking Nose | None | None | With Locking Nose | None | With Locking Nose | None | With Locking Nose | None | None |
| Mounting Method | Screw-In | Screw-In | - | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Flange | Flange | Screw-In | Screw-In | Screw-In | Screw-In | Bolt Mounting | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Flange | Press Fit | Screw-In | Screw-In | Flange | Press Fit | Screw-In | Screw-In | Flange | Screw-In | Flange | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Flange | Flange | Screw-In | Flange |
| Overall Length | Standard | Standard | - | Short | Standard | Standard | Standard | Short | Standard / Short | Short | Standard | Standard | Standard | - | - | Standard | Standard | Standard | Short | Standard | Standard | Short | - | - | - | Standard | Standard | Short | Standard | Standard | Short | Standard / Short | Standard | Short | Standard | Standard | Short | Short | Standard | Standard | Standard | Short | Short | Standard | Short |
| Body Material | Steel | Steel | - | Steel | Steel | Steel | Steel | Steel | Zinc Die Cast | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | - | - | Steel | Others | Steel | Steel | Steel / Stainless Steel | Stainless Steel | Steel | - | - | - | Steel | Steel | Steel | - | Steel | Steel | Steel | Steel | Zinc Die Cast | Steel | Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Zinc Die Cast | Zinc Die Cast | Steel / Stainless Steel | Steel |
| All Stainless | - | - | - | - | - | - | - | - | Not Compliant | Not Compliant | Applicable / Not Compliant | Not Compliant | Not Compliant | - | - | - | - | - | Not Compliant | Not Compliant | Applicable / Not Compliant | Not Compliant | - | - | - | - | - | - | - | - | - | - | - | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Applicable / Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant |
| Nose Material | Steel | Steel / Stainless Steel | - | Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | - | - | Steel / Stainless Steel | - | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel | - | - | - | Steel | Steel | Steel | Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel / Stainless Steel | Stainless Steel | Stainless Steel | Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel | Stainless Steel | Steel |
| Body O.D./Thread M(mm) | 10 ～ 12 | 5 ～ 16 | - | 8 ～ 10 | 6 ～ 16 | 10 ～ 20 | 16 ～ 20 | 12 ～ 16 | 6 ～ 12 | - | 10 ～ 20 | 8 ～ 20 | 8 ～ 16 | - | - | 8 ～ 16 | 3 ～ 8 | 8 ～ 16 | 8 ～ 10 | 8 ～ 20 | 12 ～ 20 | 12 | - | - | - | 10 ～ 16 | 12 ～ 20 | 6 | - | 10 ～ 16 | 12 ～ 16 | 8 ～ 16 | 10 ～ 16 | 6 ～ 12 | 16 | 12 ～ 16 | 8 ～ 10 | 12 ～ 16 | 12 ～ 16 | 10 ～ 20 | 12 ～ 16 | 10 ～ 12 | 10 ～ 12 | 6 ～ 12 | - |
| Stroke S(mm) | 5 ～ 6 | 4 ～ 12 | - | 5 ～ 6 | 4 ～ 8 | 5 ～ 10 | 10 ～ 12 | 6 ～ 7 | 4 ～ 8 | 10 ～ 12 | 5 ～ 10 | 4 ～ 15 | 4 ～ 8 | - | - | 4 ～ 12 | - | 4 ～ 12 | 5 ～ 7 | 4 ～ 15 | 8 ～ 12 | 6 | - | - | - | 5 ～ 8 | 6 ～ 10 | 6 | 4 ～ 12 | 5 ～ 8 | 6 ～ 8 | 4 ～ 12 | 5 ～ 12 | 4 ～ 8 | 8 | 8 ～ 10 | 5 ～ 7 | 6 ～ 8 | 6 ～ 8 | 5 ～ 10 | 8 ～ 10 | 6 ～ 8 | 6 ～ 8 | 4 ～ 8 | 10 ～ 12 |
| Nose Surface Treatment | Black Oxide / Electroless Nickel | None / Black Oxide | - | None | None / Black Oxide / Nickel Plating | Black Oxide | Black Oxide / Nickel Plating | Black Oxide | None | None | None / Nickel Plating | None / Nickel Plating | None | - | - | None / Black Oxide | - | None / Black Oxide | Trivalent Chromate | None / Nickel Plating | Nickel Plating | None | - | - | - | Black Oxide / Electroless Nickel | Black Oxide | Black Oxide | None | Black Oxide / Nickel Plating | Black Oxide | Black Oxide | None / Black Oxide | None | None | None | Nickel Plating | None / Nickel Plating | None / Nickel Plating | None / Nickel Plating | None | None | None | None | None |
| Nose Heat Treatment | Hardened | Hardened | - | None | None / Hardened | Hardened | None / Hardened | Carburized | None | Hardened | None / Hardened | None / Hardened | None | - | - | Hardened | - | Hardened | None | None / Hardened | None | None | - | - | - | Hardened | Hardened | Hardened | Hardened | None / Hardened | Hardened | Hardened | Hardened | None | None | Hardened | None | None / Hardened | None / Hardened | None / Hardened | Hardened | Hardened | Hardened | None | Hardened |
| Nose O.D. d(Ø) | 5 ～ 6 | 2 ～ 8 | 16 ～ 30 | 5 ～ 6 | 4 ～ 8 | 5 ～ 10 | 6 ～ 12 | 6 ～ 8 | 4 ～ 8 | 8 ～ 10 | 5 ～ 10 | 4 ～ 12 | 4 ～ 8 | 4 ～ 12 | M12 x 1,5 ～ M20 x 1,5 | 4 ～ 8 | - | 4 ～ 8 | 4 ～ 7 | 4 ～ 12 | 5 ～ 12 | 6 | 4 ～ 12 | 6 ～ 8 | 8 ～ 22 | 5 ～ 8 | 6 ～ 10 | 6 | 4 ～ 8 | 5 ～ 8 | 6 ～ 8 | 4 ～ 8 | 5 ～ 8 | 4 ～ 8 | 6 ～ 10 | 6 ～ 8 | 4 ～ 7 | 6 ～ 8 | 6 ～ 8 | 5 ～ 10 | 6 ～ 8 | 6 ～ 8 | 6 ～ 8 | 4 ～ 8 | 8 ～ 10 |
| Length L(mm) | 34 ～ 39 | 35 ～ 80.5 | - | 25 ～ 31 | 30.5 ～ 75.5 | 38 ～ 70 | 47 ～ 59 | 48 ～ 56 | 30.5 ～ 71 | 71 ～ 83 | 51 ～ 91 | 32 ～ 82 | 39 ～ 71 | - | - | 46 ～ 85 | - | 30 ～ 54 | 26.5 ～ 34 | 39 ～ 82 | 47 ～ 71 | 45 | - | - | - | 47.5 ～ 68 | 74 ～ 123 | 48 | 32 ～ 57 | 33 ～ 54 | 45 ～ 54 | 40 ～ 80.5 | 45 ～ 80.5 | 33 ～ 63.5 | 59 | 51 ～ 62 | 26.5 ～ 34 | 45 ～ 54 | 45 ～ 54 | 33 ～ 80 | 43 ～ 64.5 | 37 ～ 54 | 37 ～ 54 | 30.5 ～ 71 | 71 ～ 75 |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Locking Mechanism
-
Mounting Method
- Screw-In
- Press Fit
- Bolt Mounting
- Others
- Flange
-
Overall Length
-
Body Material
- Steel
- Stainless Steel
- Zinc Die Cast
- Others
-
All Stainless
-
Nose Material
-
Metric / Inch
-
Body O.D./Thread M(mm)
-
Stroke S(mm)
-
Nose Surface Treatment
-
Nose Heat Treatment
-
Nose O.D. d(Ø)
-
Length L(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 6 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
- 14 Days or Less
- 16 Days or Less
- 25 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy