NBK Indexing Plungers

• 

  Indexing Plungers - With mounting plate, selectable handle, PBX series.

  NBK

  Indexing plungers integrated with a mounting flange. Suitable for mounting to panel surfaces on equipment/devices, etc.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Indexing Plungers - With mounting plate, PBY series.

  NBK

  [Features]
  · An indexing plunger with an integrated mounting flange.
  · Suitable for mounting equipment and devices on walls etc.
  ·Pull out the knob and rotate 90° to lock with the pin in a retracted state.
  ·To unlock, pull the knob out slightly and rotate it 90°.
  · Returns to its original position via the action of the integrated spring.
  · For mounting, please use commercially available hex socket bolts, etc.
  · Using slotted holes allows you to adjust the position after mounting.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Indexing Plungers - With selectable stroke, PLX series.

  NBK

  Two types of standardized stroke for each pin diameter. For indexing or positioning.
  
  [Features]
  - Two types of standardized stroke for each pin diameter (except for φ10 and φ12).
  - For indexing or positioning.
  - Pin is hardened (steel) or nickel-plated (stainless steel). Excellent abrasion resistance.
  - If the threaded part is too long for the mounting surface, use the PXC indexing plunger collar instead.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Indexing Plungers - Lever type, fine thread, retracted position, PXVS series.

  NBK

  [Features]
  - Stainless steel.
  - Superior corrosion resistance.
  - Turn the lever to control the pin insertion.
  - Retractable into the body with a 180° turn of the lever.
  - Lever can be locked with a notch machined in the main body.
  - Ergonomic lever cap attached to the PXVS-B/BK.
  - Nickel plating for good abrasion resistance.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Indexing Plungers - Lever Type, PDV series.

  NBK

  [Features]
  - This index plunger has a lever that can be turned to insert or remove the pin.
  Operation of the plunger is carried out by three types of movement.
  Standard Models (PDV-A, PDV-AK)
  Pin retracts into the body when the lever is rotated 90°
  Force from the internal spring returns the pin to its original position when the lever is released
  Holding Models (PDV-B, PDV-BK)
  Pin does not retract when the lever is released at a position of 120°
  Force from the internal spring returns the pin to its original position when the lever is rotated slightly in the opposite direction
  Locking Models (PDV-C, PDV-CK)
  Pin retracts into the body when the lever is rotated 120°
  When the pin is retracted, the guide pin is locked inside the slot
  Pin can be unlocked by slightly pulling on the lever while rotating it in the opposite direction
  Force from the internal spring returns the pin to its original position when the lever is rotated slightly
  PDV-A, PDV-B, and PDV-C has no lock nut and can be used to prevent loosening
  PDV-AK, PDV-BK, and PDV-CK have lock nuts and can be used to fix pins in place

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	10 Days or more

• 

  Indexing Plungers - Knob Type, PDX series.

  NBK

  [Features]
  · A new type of indexing plunger.
  · Features a lock mechanism.
  · The PDX-A/AK, with knob, have been standardized.
  · For the PDX-A/AK, pin insertion is controlled via the knob.
  · Turning the knob 90° clockwise after pulling it out allows the guide pin to fit into the slot, locking the unit with the pin retracted.
  · To unlock, pull the knob out slightly and rotate it 90° counterclockwise.
  · Returns to its original position via the action of the integrated spring.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	10 Days or more

• 

  Indexing Plungers - Compact, PHX Series.

  NBK

  [Features]
  - Compact indexing plunger.
  - Metal part unexposed after mounting.
  - Nickel-plated pin.
  - Superior abrasion resistance.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Indexing Plungers - Compact, fine thread, PHY series.

  NBK

  Compact indexing plunger.
  
  [Features]
  - A compact indexing plunger.
  - Pull the knob and rotate 30° to lock with the pin retracted.
  - To unlock, pull the knob slightly and rotate 30°.
  - Returns to its original position via internal spring action.
  - Lock mechanism built into the knob.
  - Overall length is the same as a PHX without a lock mechanism.
  - Pin is nickel-plated for good abrasion resistance.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Indexing Plungers - With flange and pilot pin, PPLY series.

  NBK

  Precise positioning indexing plungers.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	11 Days or more

• 

  Indexing Plungers - Short Thread Length, PSX Series.

  NBK

  Short type that can be mounted directly to a thin frame.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Indexing Plungers - With locking function, PYS series.

  NBK

  The pin can be locked in its retracted position by pulling and rotating the knob 90 degrees. To unlock, pull the knob slightly and rotate it by 90 degrees. The built-in spring returns the pin to its origin.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Indexing Plungers - With/without knob, fine thread, PXX series.

  NBK

  Indexing or positioning pin. Good abrasion resistance.
  
  [Features]
  - Indexing or positioning pin.
  - New standards for [PXXS-S] and [PXXS-SK] with stainless steel knobs.
  - Pin is hardened (steel) or nickel-plated (stainless steel). Excels in abrasion resistance.
  - If the threaded part is too long for the mounting surface, use the [PXC] indexing plunger collar instead.
  - Use a locking service for fixing indexing plungers.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Indexing Plungers - Fine Thread, PXY Series.

  NBK

  The pin can be locked in its retracted position by pulling and rotating the knob 90 degrees. To unlock, pull the knob slightly and rotate it by 90 degrees. The built-in spring returns the pin to its origin.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Indexing Plungers - Knob type, fine thread, PCX series.

  NBK

  [Features]
  - A new type of indexing plunger.
  - Pin usually retracted in the main unit.
  - With lock mechanism.
  - The knob-type PCX-A/AK and the key-type PCX-B/BK are standardized.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Indexing Plungers - Knob type, flanged, PFX series.

  NBK

  [Features]
  · A flanged type indexing plunger that is mounted using countersunk bolts and rivets etc.
  · The long pin type PFX-H-A (long pin type) is ideal for mounting thick panels and frames etc.
  · The pin has undergone hardening and offers excellent abrasion resistance.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Indexing Plungers - Flanged knob type, retracted position, PFY series.

  NBK

  [Features]
  · A flanged type indexing plunger that is mounted using countersunk bolts and rivets etc.
  · The long pin type PFY-H-A is ideal for mounting thick panels and frames etc.
  · Pull out the knob and rotate 90° to lock with the pin in a retracted state. · To unlock, pull the knob out slightly and rotate it 90°. · Returns to its original position via the action of the integrated spring.
  · The lock mechanism is integrated into the knob. Therefore, the overall length is the same as that of the PFX, which does not have a lock mechanism.
  · The pin has undergone hardening and offers excellent abrasion resistance.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Indexing Plungers - With selectable stroke, retracted position, PLY series.

  NBK

  Two types of standardized stroke for each pin diameter. Pull the knob and rotate 90° to lock with the pin retracted. To unlock, pull the knob slightly and rotate 90°. Returns to its original position via internal spring action.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Indexing Plungers - Knob type, fine/coarse thread, PMX series.

  NBK

  Simple structure index plunger.
  [Features]
  · Superior cost performance.
  · For all pin diameters, coarse thread and fine thread are standardized.
  · Can select main body material quality and whether or not to include a lock nut using the product code.
  [Applications]
  · For positioning workpieces.
  · For attaching and detaching workpieces.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Indexing Plungers - Flanged knob type, PLX series.

  NBK

  [Features]
  - Indexing plunger for accurate positioning.
  - H7 pin diameter tolerance.
  - G6 hole tolerance recommended for the mating side.
  - Use with the positioning bushings for precise positioning.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	11 Days or more

• 

  Indexing Plungers - Plate Mount, PPX series.

  NBK

  [Features]
  - Indexing plunger that can be mounted on a thin plate.
  - Optimal for positioning and fixing the cases/covers of electronic/communication equipment.
  - Fixing nut can be removed.
  - Mount with a plate clamped with the fixing nut.
  - Two types of pin lengths standardized for each pin diameter.
  - Nickel-plated pin.
  - Superior abrasion resistance.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	11 Days or more

• 

  Indexing Plungers - Knob type, plate mount, PPY series.

  NBK

  Indexing plungers for attaching to thin plates. Optimal for positioning and securing casings and covers on electronics and telecommunications equipment.
  
  [Features]
  · Removable retaining nut.
  · Plates are mounted sandwiched between the retaining nuts.
  · The pin can be locked in its retracted position by turning the knob 90 degrees while it is extended.
  · The lock is released by pulling the knob out slightly and turning it 90 degrees.
  · The built-in spring returns the pin to its origin.
  · Two types of pin length are standardized for each pin diameter.
  · The pins are nickel-plated.
  · Superior abrasion-resistant properties.
  · Locking nut: SUM22L, trivalent chromate treated.
  · Pin: nickel plated, polished.
  · Spring: SUS301.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	11 Days or more

• 

  Indexing Plungers - Lever Type, Fine Thread, PXV Series.

  NBK

  Turn the lever to control pin insertion on the indexing plunger.
  
  [Features]
  - Pin retracts into the body with a 180° turn of the lever.
  - Lever can be locked with a notch machined in the main body.
  - Ergonomic lever cap attached to the PXV-B/BK.
  - Hardened pin for good abrasion resistance.
  - PXV-A and PXV-B have no lock nut.
  - PXV-AK and PXV-BK have a lock nut for fixing.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Indexing Plungers - With/without knob, fine thread, PXZ series.

  NBK

  [Features]
  - The screw itself can be screwed entirely into devices, with only the knob remaining visible.
  - Attractive design.
  - The locking pin is available in hardened (steel) or nickel-plated (stainless steel) versions.
  - Highly resistant to wear and tear.
  - The knob used is the newly standardized stainless steel knob used in FXZS-Z and PXZS-SK.
  - Use to prevent loosening of index plungers.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

Loading...