(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Indexing Plungers（Nose Surface Treatment：Nickel Plating）
Type
-
Standard Knob -
Lever Type -
With Ring -
Related Components -
No Knob -
Special Knob
-
Indexing Plungers - Knob type, metric fine or coarse thread.
MISUMI
•Type: Standard Knob
•Overall Length: Standard
•Mounting Method: Screw-In
•Locking Mechanism: Without Locking Nose
•Operation Knob: Provided- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - Lever type, metric fine thread.
MISUMI
•Type: Lever Type
•Overall Length: Standard
•Mounting Method: Screw-In
•Locking Mechanism: Lever Type
•Operation Knob: Provided- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - With selectable stroke, PLX series.
NBK
Two types of standardized stroke for each pin diameter. For indexing or positioning.
[Features]
- Two types of standardized stroke for each pin diameter (except for φ10 and φ12).
- For indexing or positioning.
- Pin is hardened (steel) or nickel-plated (stainless steel). Excellent abrasion resistance.
- If the threaded part is too long for the mounting surface, use the PXC indexing plunger collar instead.- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - Lever type, fine thread, retracted position, PXVS series.
NBK
[Features]
- Stainless steel.
- Superior corrosion resistance.
- Turn the lever to control the pin insertion.
- Retractable into the body with a 180° turn of the lever.
- Lever can be locked with a notch machined in the main body.
- Ergonomic lever cap attached to the PXVS-B/BK.
- Nickel plating for good abrasion resistance.- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - No knob, light load.
MISUMI
•Type: No Knob
•Overall Length: Standard
•Mounting Method: Screw-In
•Locking Mechanism: Without Locking Nose
•Body Material: 12L13 Carbon Steel- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more Show Stock Products
-
Indexing Plungers - Compact, PHX Series.
NBK
[Features]
- Compact indexing plunger.
- Metal part unexposed after mounting.
- Nickel-plated pin.
- Superior abrasion resistance.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - Short Thread Length, PSX Series.
NBK
Short type that can be mounted directly to a thin frame.
- Volume Discount
Days to Ship: 11 Days or more -
Indexing Plungers - With locking function, PYS series.
NBK
The pin can be locked in its retracted position by pulling and rotating the knob 90 degrees. To unlock, pull the knob slightly and rotate it by 90 degrees. The built-in spring returns the pin to its origin.
- Volume Discount
Days to Ship: 11 Days or more -
Indexing Plungers - With/without knob, fine thread, PXX series.
NBK
Indexing or positioning pin. Good abrasion resistance.
[Features]
- Indexing or positioning pin.
- New standards for [PXXS-S] and [PXXS-SK] with stainless steel knobs.
- Pin is hardened (steel) or nickel-plated (stainless steel). Excels in abrasion resistance.
- If the threaded part is too long for the mounting surface, use the [PXC] indexing plunger collar instead.
- Use a locking service for fixing indexing plungers.- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - Fine Thread, PXY Series.
NBK
The pin can be locked in its retracted position by pulling and rotating the knob 90 degrees. To unlock, pull the knob slightly and rotate it by 90 degrees. The built-in spring returns the pin to its origin.
- Volume Discount
Days to Ship: 8 Days or more Show Stock Products
-
Indexing Plungers - With selectable stroke, retracted position, PLY series.
NBK
Two types of standardized stroke for each pin diameter. Pull the knob and rotate 90° to lock with the pin retracted. To unlock, pull the knob slightly and rotate 90°. Returns to its original position via internal spring action.
- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - Plate Mount, PPX series.
NBK
[Features]
- Indexing plunger that can be mounted on a thin plate.
- Optimal for positioning and fixing the cases/covers of electronic/communication equipment.
- Fixing nut can be removed.
- Mount with a plate clamped with the fixing nut.
- Two types of pin lengths standardized for each pin diameter.
- Nickel-plated pin.
- Superior abrasion resistance.- Volume Discount
Days to Ship: 11 Days or more -
Indexing Plungers - Knob type, plate mount, PPY series.
NBK
Indexing plungers for attaching to thin plates. Optimal for positioning and securing casings and covers on electronics and telecommunications equipment.
[Features]
· Removable retaining nut.
· Plates are mounted sandwiched between the retaining nuts.
· The pin can be locked in its retracted position by turning the knob 90 degrees while it is extended.
· The lock is released by pulling the knob out slightly and turning it 90 degrees.
· The built-in spring returns the pin to its origin.
· Two types of pin length are standardized for each pin diameter.
· The pins are nickel-plated.
· Superior abrasion-resistant properties.
· Locking nut: SUM22L, trivalent chromate treated.
· Pin: nickel plated, polished.
· Spring: SUS301.- Volume Discount
Days to Ship: 11 Days or more -
Indexing Plungers - With/without knob, fine thread, PXZ series.
NBK
[Features]
- The screw itself can be screwed entirely into devices, with only the knob remaining visible.
- Attractive design.
- The locking pin is available in hardened (steel) or nickel-plated (stainless steel) versions.
- Highly resistant to wear and tear.
- The knob used is the newly standardized stainless steel knob used in FXZS-Z and PXZS-SK.
- Use to prevent loosening of index plungers.- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Type |
| Locking Mechanism |
| Mounting Method |
| Overall Length |
| Body Material |
| All Stainless |
| Nose Material |
| Body O.D./Thread M(mm) |
| Stroke S(mm) |
| Nose Surface Treatment |
| Nose Heat Treatment |
| Nose O.D. d(Ø) |
| Length L(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | NBK | NBK | MISUMI | NBK | NBK | NBK | NBK | NBK | NBK | NBK | NBK | NBK |
| Product Series | Indexing Plungers - Knob type, metric fine or coarse thread. | Indexing Plungers - Lever type, fine thread, retracted position, PXVS series. | Indexing Plungers - With/without knob, fine thread, PXX series. | Indexing Plungers - With selectable stroke, retracted position, PLY series. | Indexing Plungers - With/without knob, fine thread, PXZ series. | |||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more |
8 Days or more
Show Stock Products |
Same day or more
Show Stock Products | 11 Days or more | 11 Days or more | 8 Days or more |
8 Days or more
Show Stock Products | 8 Days or more | 11 Days or more | 11 Days or more | 8 Days or more |
| Specifications |
|
|
| |||||||||||
| Type | Standard Knob | Lever Type | Standard Knob | Lever Type | No Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob / No Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob / No Knob |
| Locking Mechanism | Without Locking Nose | With Locking Nose | None | With Locking Nose | Without Locking Nose | None | None | With Locking Nose | None | With Locking Nose | With Locking Nose | None | With Locking Nose | None |
| Mounting Method | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In |
| Overall Length | Standard | Standard | Standard | Standard | Standard | Short | Short | Standard | Standard | Standard | Standard | Short | Short | Standard |
| Body Material | - | - | Stainless Steel | Stainless Steel | - | Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel | Steel | Stainless Steel |
| All Stainless | - | - | Not Compliant | Applicable / Not Compliant | - | Not Compliant | Not Compliant | Not Compliant | Applicable / Not Compliant | Applicable / Not Compliant | Not Compliant | Not Compliant | Not Compliant | Applicable / Not Compliant |
| Nose Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Body O.D./Thread M(mm) | 10 ～ 16 | 16 ～ 20 | 8 ～ 20 | 12 ～ 20 | 10 ～ 16 | 8 ～ 10 | 12 ～ 16 | 12 ～ 16 | 10 ～ 20 | 10 ～ 20 | 8 ～ 20 | 10 ～ 12 | 10 ～ 12 | 10 ～ 20 |
| Stroke S(mm) | 5 ～ 8 | 10 ～ 12 | 4 ～ 15 | 8 ～ 12 | 5 ～ 8 | 5 ～ 7 | 6 ～ 8 | 6 ～ 8 | 5 ～ 10 | 5 ～ 10 | 4 ～ 15 | 6 ～ 7.5 | 6 ～ 7.5 | 5 ～ 10 |
| Nose Surface Treatment | Nickel Plating | Nickel Plating | Nickel Plating | Nickel Plating | Nickel Plating | Nickel Plating | Nickel Plating | Nickel Plating | Nickel Plating | Nickel Plating | Nickel Plating | Nickel Plating | Nickel Plating | Nickel Plating |
| Nose Heat Treatment | None | None | None | None | None | None | None | None | None | None | None | None | None | None |
| Nose O.D. d(Ø) | 5 ～ 8 | 6 ～ 12 | 4 ～ 12 | 5 ～ 12 | 5 ～ 8 | 4 ～ 7 | 6 ～ 8 | 6 ～ 8 | 5 ～ 10 | 5 ～ 10 | 4 ～ 12 | 6 ～ 8 | 6 ～ 8 | 5 ～ 10 |
| Length L(mm) | 45 ～ 75.5 | 47 ～ 59 | 32 ～ 82 | 47 ～ 71 | 33 ～ 54 | 26.5 ～ 34 | 45 ～ 54 | 45 ～ 54 | 33 ～ 80 | 51 ～ 91 | 39 ～ 82 | 44.5 ～ 52 | 42.5 ～ 52 | 33 ～ 80 |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Locking Mechanism
-
Mounting Method
- Screw-In
- Press Fit
- Bolt Mounting
- Others
- Flange
-
Overall Length
- Standard
- Short
-
Body Material
- Steel
- Stainless Steel
- Zinc Die Cast
- Others
-
All Stainless
- Applicable
- Not Compliant
-
Nose Material
- Steel
- Stainless Steel
-
Metric / Inch
- metric
-
Body O.D./Thread M(mm)
-
Stroke S(mm)
-
Nose Surface Treatment
-
Nose Heat Treatment
-
Nose O.D. d(Ø)
-
Length L(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 6 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
- 14 Days or Less
- 16 Days or Less
- 25 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy