Precision Linear Shafts - One End Tapped
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
Days to Ship: | 7 Days or more |
---|
Precision Linear Shafts - One End Tapped with Wrench Flat - Precision Type
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type. Lineup of Shafts with Drilled Holes and the same function as Screw Wrench Groove. Suitable for Small Spaces
Days to Ship: | 7 Days or more |
---|
Precision Linear Shafts - Both Ends Tapped
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
Days to Ship: | 7 Days or more |
---|
Precision Linear Shafts - Both Ends Tapped - with Wrench Flats/Cross Drilled Holes
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
Days to Ship: | 7 Days or more |
---|
Full Length Case Hardened Precision Linear Shafts
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts -Stepped Ends/Stepped Ends with Wrench Flats
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - One End Threaded with Wrench Flat - Precision Type
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type. Lineup of Shafts with Space Saving Compatible Drill Holes of the same function as Screw Wrench Groove.
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - One End Threaded with Undercut
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type. Lineup of Shafts with Drilled Holes and the same function as Screw Wrench Groove. Suitable for Small Spaces
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - One End Threaded with Undercut and Wrench Flat -Precision Type
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - Both Ends Threaded
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - Both Ends Threaded - Thread Dia. Equal to Shaft Dia.
MISUMI
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - Both Ends Threaded with Wrench Flat - Precision Type
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type. Lineup of Shafts with Space Saving Compatible Drill Holes of the same function as Screw Wrench Groove.
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - Both Ends Threaded with Undercut
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - Both Ends Threaded with Undercut and Wrench Flat - Precision Type
MISUMI
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - One End Threaded One End Tapped - Wrench Flat Type
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - One End Threaded One End Tapped with Undercut
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - One End Threaded One End Tapped with Undercut - Wrench Flat Type
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - One End Stepped, Precision
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - One End Stepped and Tapped - Wrench Flat Type
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - Both Ends Stepped
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - Both Ends Tapped and Stepped with Wrench Flat - Precision Type
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - One End Stepped - One End/Both Ends Tapped
MISUMI
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - One End Stepped Both Ends Tapped with Wrench Flat -Precision Type
MISUMI
Days to Ship: | 8 Days or more |
---|
Precision Linear Shafts - One End Stepped and Threaded One End Tapped
MISUMI
Days to Ship: | 8 Days or more |
---|
High Precision Linear Shafts - One End Threaded
MISUMI
Perpendicularity 0.03/Concentricity 0.02 Guaranteed Product.
Days to Ship: | 10 Days or more |
---|
Days to Ship: | 10 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 10 Days or more |
---|
Days to Ship: | 10 Days or more |
---|
Days to Ship: | 8 Days |
---|
Days to Ship: | 8 Days |
---|
Days to Ship: | 8 Days |
---|
Days to Ship: | 8 Days |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Basic Shape |
Shaft Dia. D(mm) |
Shaft Dia. D(inch) |
End Shape (Left) |
End Shape (Right) |
Shaft End Perpendicularity |
Material |
Heat Treated |
Surface Finish |
Shaft Fits |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
Product Series | Precision Linear Shafts - One End Tapped with Wrench Flat - Precision Type | Precision Linear Shafts - Both Ends Tapped - with Wrench Flats/Cross Drilled Holes | Precision Linear Shafts -Stepped Ends/Stepped Ends with Wrench Flats | Precision Linear Shafts - One End Threaded with Wrench Flat - Precision Type | Precision Linear Shafts - One End Threaded with Undercut and Wrench Flat -Precision Type | Precision Linear Shafts - Both Ends Threaded - Thread Dia. Equal to Shaft Dia. | Precision Linear Shafts - Both Ends Threaded with Wrench Flat - Precision Type | Precision Linear Shafts - Both Ends Threaded with Undercut and Wrench Flat - Precision Type | Precision Linear Shafts - One End Threaded One End Tapped - Wrench Flat Type | Precision Linear Shafts - One End Threaded One End Tapped with Undercut | Precision Linear Shafts - One End Threaded One End Tapped with Undercut - Wrench Flat Type | Precision Linear Shafts - One End Stepped and Tapped - Wrench Flat Type | Precision Linear Shafts - Both Ends Tapped and Stepped with Wrench Flat - Precision Type | Precision Linear Shafts - One End Stepped - One End/Both Ends Tapped | Precision Linear Shafts - One End Stepped Both Ends Tapped with Wrench Flat -Precision Type | Precision Linear Shafts - One End Stepped and Threaded One End Tapped | Precision Linear Shafts - Surface Treatment Fully Plated Type | Precision Linear Shafts - Retaining Ring Grooves on Both Ends | Precision Hollow Linear Shafts - One End Threaded One End Tapped | Precision Hollow Linear Shafts - One End Stepped One End Tapped | |||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Days to Ship | 7 Days or more | 7 Days or more | 7 Days or more | 7 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days | 8 Days | 8 Days | 8 Days |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Basic Shape | Straight | Straight | Straight | Straight | Straight | One End Stepped | Straight | One End Stepped | One End Stepped | One End Stepped | Both Ends Stepped | Straight | Both Ends Stepped | Both Ends Stepped | Both Ends Stepped | One End Stepped | One End Stepped | One End Stepped | One End Stepped | One End Stepped | One End Stepped | Both Ends Stepped | Both Ends Stepped | One End Stepped | One End Stepped | One End Stepped | One End Stepped / Both Ends Stepped | Straight / One End Stepped | Straight / One End Stepped | Straight / One End Stepped | Straight | Straight | Straight / One End Stepped | Hollow Both Ends Stepped | Hollow One End Stepped | Hollow One End Stepped | Hollow Both Ends Stepped | Hollow One End Stepped | Straight | Straight / One End Stepped / Both Ends Stepped | Hollow / Hollow One End Stepped / Hollow Both Ends Stepped | Straight | Straight | Straight | One End Stepped |
Shaft Dia. D(mm) | 4 ~ 50 | 6 ~ 50 | 4 ~ 50 | 6 ~ 50 | 6 ~ 20 | 4 ~ 50 | 3 ~ 30 | 6 ~ 50 | 8 ~ 50 | 8 ~ 50 | 4 ~ 50 | 3 ~ 30 | 6 ~ 50 | 8 ~ 50 | 8 ~ 50 | 4 ~ 50 | 6 ~ 50 | 8 ~ 50 | 8 ~ 50 | 8 ~ 50 | 8 ~ 50 | 8 ~ 50 | 8 ~ 50 | 8 ~ 50 | 8 ~ 50 | 8 ~ 50 | 4 ~ 30 | 8 ~ 50 | 6 ~ 20 | 15 ~ 50 | 3 ~ 30 | 6 ~ 50 | 6 ~ 20 | 6 ~ 40 | 6 ~ 40 | 6 ~ 50 | 6 ~ 50 | 6 ~ 50 | 10 ~ 50 | 6 ~ 50 | 6 ~ 50 | - | - | - | - |
Shaft Dia. D(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1" ~ 5/8" | 1" ~ 5/8" | 1" ~ 5/8" | 1" ~ 5/8" |
End Shape (Left) | Tapped | Tapped | Tapped | Tapped | Tapped | Threaded | Threaded | Threaded | Threaded | Threaded | Threaded | Threaded | Threaded | Threaded | Threaded | Threaded | Threaded | Threaded | Threaded | No Machining / Tapped | Tapped | No Machining / Tapped | Tapped | No Machining / Tapped | Tapped | Threaded | Threaded | No Machining / Tapped / Threaded | Tapped / Threaded | No Machining / Tapped / Threaded | Retaining Ring Groove | Keyway | Tapered | Threaded | Threaded | No Machining | No Machining | No Machining | No Machining | No Machining / Tapped / Threaded / Retaining Ring Groove / Tapped Holes / Hex Hole / Tapered | No Machining / Tapped / Threaded / Retaining Ring Groove | No Machining | Tapped | Tapped | Threaded |
End Shape (Right) | No Machining | No Machining | Tapped | Tapped | No Machining / Tapped | No Machining | No Machining | No Machining | No Machining | No Machining | Threaded | Threaded | Threaded | Threaded | Threaded | Tapped | Tapped | Tapped | Tapped | No Machining | No Machining | No Machining / Tapped | Tapped | Tapped | Tapped | Tapped | No Machining / Tapped / Threaded | No Machining / Threaded | Hex Hole | Tapped Holes | Retaining Ring Groove | No Machining | Tapped / Threaded | Threaded | Tapped | No Machining | No Machining | Tapped | No Machining | No Machining / Tapped / Threaded / Retaining Ring Groove / Tapped Holes / Hex Hole / Tapered | No Machining / Tapped / Threaded / Retaining Ring Groove | No Machining | No Machining | Tapped | No Machining |
Shaft End Perpendicularity | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.2) | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.2) | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.2) | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.2) | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.2) | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.2) | Perpendicularity (0.2) / Perpendicularity (0.03) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.03) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | - | - | - | - | - | Perpendicularity (0.2) | Perpendicularity (0.2) | - | - | - | - | - |
Material | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel |
Heat Treated | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Not Hardened / Induction Hardened | Not Hardened / Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened |
Surface Finish | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Low Temperature Black Chrome | Electroless Nickel | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome / Low Temperature Black Chrome | None / Hard Chrome | None / Hard Chrome | None / Hard Chrome | None / Hard Chrome | None / Hard Chrome | None / Hard Chrome | None / Hard Chrome |
Shaft Fits | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | g6 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | h5 ~ f8 | g6 | g6 | g6 | g6 | h5 ~ f8 | h5 ~ f8 | h5 ~ g6 | g6 | g6 | g6 | g6 | g6 | g6 | h5 ~ g6 | g6 | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy