• Debido a la posibilidad del impácto del Tifón (Hagibis) en Japón en esta semana, algunos productos importados se podrían retrasar. Gracias por su comprensión.
    Due to the possibility of a Typhoon (Hagibis) in Japan this week, some imported products may be delayed. Thank you for your understanding.

MISUMI Ejector Sleeves(Shaft diameter tolerance:0/-0.005)

Days to Ship
  • All
  • 5 Days or Less
  • 6 Days or Less
  • 8 Days or Less
  1. 1
Brand
Product Series
CAD
Days to Ship
Product composition
Material
Surface treatment
Head thickness
Shaft diameter tolerance
D/P (Shaft diameter)(mm)
V (Hole diameter)(mm)
Concentricity between the hole and shaft diameters
Boring method
Inner dia. tolerance
Tapered or not
Center pin tip shape
P (Tip diameter)(mm)

    Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

      Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-

        Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

        • New Products

        Short Ejector Sleeves (Bushings for straight ejector pins)

        Brand

        MISUMI

        MISUMI

        MISUMI

        MISUMI

        Product Series

        Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

        Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-

        Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

        Short Ejector Sleeves (Bushings for straight ejector pins)

        CAD
        • 2D / 3D
        • 2D / 3D
        • 2D / 3D
        • 2D / 3D
        Days to Ship 8 Days or more 8 Days or more 8 Days or more 8 Days or more
        Product compositionSingle sleeveSingle sleeveSingle sleeveSingle sleeve
        MaterialSKH51SKH51SKH51SKH51
        Surface treatmentNoNoNoNo
        Head thickness4mm(T4)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4)
        Shaft diameter tolerance0/-0.0050/-0.0050/-0.0050/-0.005
        D/P (Shaft diameter)(mm)3 ~ 83.2 ~ 143.2 ~ 142.5 ~ 8
        V (Hole diameter)(mm)1 ~ 60.8 ~ 12.20.8 ~ 12.21 ~ 6.8
        Concentricity between the hole and shaft diameters◎0.005◎0.005◎0.01◎0.01
        Boring methodGrindingGrindingWire cutting & polishing-
        Inner dia. tolerance+0.005/0+0.005/0 / +0.01/0+0.01/0+0.005/0 / +0.01/0
        Tapered or notYesNoNoYes
        Center pin tip shapeNoNoNoNo
        P (Tip diameter)(mm)2.5 ~ 8---

        Loading...

        1. 1

        Related Categories to Ejector Sleeves