Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WP "For Finishing" with Wiper Edge (Part Numbers)

Part Number

Configured Part Number is shown.

Part Number
CNMG120404WP-CA510
CNMG120404WP-CA515
CNMG120404WP-CA525
CNMG120404WP-CA530
CNMG120404WP-CA5505
CNMG120404WP-CA5515
CNMG120404WP-CA5525
CNMG120404WP-TN6020
CNMG120408WP-CA510
CNMG120408WP-CA515
CNMG120408WP-CA530
CNMG120408WP-CA5505
CNMG120408WP-CA5515
CNMG120408WP-CA5525
CNMG120408WP-PV7010
CNMG120408WP-PV7025
CNMG120408WP-PV720
Part NumberVolume DiscountDays to Ship Shape Use No. of Usable Corners Work Material Rake Angle Preferred Hand Nose R JAN Code Trusco Code Material Note Number Contained In A Packet

Quote

C (80° Diamond-Shape)Outer Diameter/Inner Diameter4SteelNegativeNo-hand0.4--0.4CA510--

8 Days or more

C (80° Diamond-Shape)Outer Diameter/Inner Diameter4SteelNegativeNo-hand0.4--0.4CA515--

8 Days or more

C (80° Diamond-Shape)Outer Diameter/Inner Diameter4SteelNegativeNo-hand0.4--0.4CA525--

9 Days or more

C (80° Diamond-Shape)Outer Diameter/Inner Diameter4SteelNegativeNo-hand0.4--0.4CA530--

8 Days or more

C (80° Diamond-Shape)Outer Diameter/Inner Diameter4SteelNegativeNo-hand0.4--0.4CA5505--

8 Days or more

C (80° Diamond-Shape)Outer Diameter/Inner Diameter4SteelNegativeNo-hand0.4--0.4CA5515--

12 Days or more

C (80° Diamond-Shape)Outer Diameter/Inner Diameter4SteelNegativeNo-hand0.4--0.4CA5525--

Quote

C (80° Diamond-Shape)Outer Diameter/Inner Diameter4Steel / Stainless SteelNegativeNo-hand0.4--0.4TN6020--

13 Days or more

C (80° Diamond-Shape)Outer Diameter/Inner Diameter4SteelNegativeNo-hand0.8--0.8CA510--

8 Days or more

C (80° Diamond-Shape)Outer Diameter/Inner Diameter4SteelNegativeNo-hand0.8--0.8CA515--

9 Days or more

C (80° Diamond-Shape)Outer Diameter/Inner Diameter4SteelNegativeNo-hand0.8--0.8CA530--

8 Days or more

C (80° Diamond-Shape)Outer Diameter/Inner Diameter4SteelNegativeNo-hand0.8--0.8CA5505--

8 Days or more

C (80° Diamond-Shape)Outer Diameter/Inner Diameter4SteelNegativeNo-hand0.8--0.8CA5515--

8 Days or more

C (80° Diamond-Shape)Outer Diameter/Inner Diameter4SteelNegativeNo-hand0.8--0.8CA5525--

Quote

C (80° Diamond-Shape)Outer Diameter/Inner Diameter4Steel / Stainless SteelNegativeNo-hand0.8--0.8PV7010--

Quote

C (80° Diamond-Shape)Outer Diameter/Inner Diameter4Steel / Stainless SteelNegativeNo-hand0.8--0.8PV7025--

8 Days or more

-------4960664723669 771-6451--For turning, PV720: the foremost recommended PVD cermet for steel machining10

Loading...

  1. 1

Basic Information

Breaker Application Finish

Additional Products in this Category

Tech Support