Mark tube stopper for use in fail prevention mark tube.

Mark tube stopper for use in fail prevention mark tube.

Having problems with the mark tube coming loose when using spring terminal blocks?
Use a mark tube stopper to make it harder for the tube to drop out.

[Features]
- Secures mark tubes in general wiring applications.
- Reduces mark tube drop out when crimp terminals are not used. (Is not fully fixed)
[Specifications]
- Material: Nylon 66
- Color: Natural
- Compatible wire size: 0.3 to 0.5mm² / AWG22-20 (MS-3-050N)
- Compatible wire size: 0.35 to 1.25mm² /AWG20-16 (MS-4-125N)
- Compatible wire size: 1.25 to 3.5mm² / AWG16-10 (MS5-350N)

Part Number

Configured Part Number is shown.

Part Number
MS-3-050N
MS-4-125N
MS-5-350N
Part NumberVolume DiscountDays to Ship Conforming wire size (cross section)
(mm2)
Conforming wire size (AWG)
(AWG)
Notes

6 Days or more

0.3 to 0.522 to 20For applicable wire size: There are cases where use is not possible due to the wire type, coating outer diameter, etc., even for a noted wire size.

6 Days or more

0.35 to 1.2520 to 16For applicable wire size: There are cases where use is not possible due to the wire type, coating outer diameter, etc., even for a noted wire size.

6 Days or more

1.25 to 3.516 to 10For applicable wire size: There are cases where use is not possible due to the wire type, coating outer diameter, etc., even for a noted wire size.

Loading...

  1. 1

Basic Information

Color Natural

Additional Products in this Category

Tech Support