Half-inch Mirror Holder

Half-inch Mirror Holder

The mirror holder is dedicated to mirror with a diameter of 12.7 mm. Two types of operation screws: the knurled knob, which can be operated by hand, and the set bolt type for embedded equipment, which can prevent mis-operation, are available.

[Features]
· Newly designed on concept of compact and high performance.
· Although the machine body is compact enough to fit in a 1 inch cubic meter of space, the holder reduces the meandering width and the hysteresis width of two axes - θy and θz - to several order of microrads, and delivers the top level of stability for 60 hours after being located (at normal temperature).
· The holder can be mounted with an M4 screw that has a step to prevent the holder from rotating.
· The mounting plate type that can be installed at positions of 0° and 45° are also available.
· When the plate is used, the rod axis flushes with the mirror reflecting surface.

PDF

FM536-12.7

 

FM536-12.7-T

Part Number
FM536-12.7
FM536-12.7B
FM536-12.7B-T
FM536-12.7K
FM536-12.7K-T
Part NumberVolume DiscountDays to Ship RoHSMounting Plate Feed screw

11 Days or more

6NoKnurled Knob

11 Days or more

645° Attached PlateKnurled Knob

11 Days or more

645° Attached PlateT (Set Bolt)

11 Days or more

60° Attached PlateKnurled Knob

11 Days or more

60° Attached PlateT (Set Bolt)

Loading...

  1. 1
 

Basic Information

Used Mirror Diameter(φ) 12.7 Fine Movement Method Feed screw P=0.25 Adjustment axis θy, θz axes

Additional Products in this Category

Tech Support