• Debido al Tifón (Hagibis) que azotó Japón esta semana (12 de Oct), algunos productos de importación se ha visto afectados. Gracias por su comprensión.
    Due to the Typhoon (Hagibis) in Japan last week (12 Oct), some imported products may be delayed. Thank you for your understanding.

Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral
  • Volume Discount

Capable of everything from positioning to chamfering in a single shot

  • Non-Coated
  • Aluminum
  • 2 Flutes

Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral:Related Image

Part Number
SEC-ALCMEM3-90
SEC-ALCMEM4-90
SEC-ALCMEM6-90
SEC-ALCMEM8-90
SEC-ALCMEM10-90
SEC-ALCMEM12-90
Part NumberVolume DiscountDays to Ship Outer Diameter (D)
(mm)
Shank Diameter (d) Overall Length L Groove Length ℓ Diameter Tolerance Tolerance of Shank Diameter
Available

6 Days or more

335080 – -0.02h6
Available

6 Days or more

4450100 – -0.02h6
Available

6 Days or more

6660150 – -0.02h6
Available

6 Days or more

8860180 – -0.02h6
Available

6 Days or more

101065220 – -0.02h6
Available

6 Days or more

121275260 – -0.02h6

Loading...

  1. 1

Specifications

Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral:Related Image

Model Number   Double Angle
θ
Groove Length
Overall Length
L
Shank Diameter
d
Outer Diameter
D
SEC-ALCMEM 3 90° 8 50 3
4 90° 10 50 4
6 90° 15 60 6
8 90° 18 60 8
10 90° 22 65 10
12 90° 26 75 12


For Cutting Conditions, Refer to >>Click here.

More Information


It has a tip that is shaped so as to be difficult to damage while discharging chips with high efficiency, allowing everything from positioning
(= centering) through to beveling to be achieved with just the one unit.
It has a sharp cutting edge that prevents the built-up edge that's unique to aluminum.
The tip core thickness is roughly 0.1D (1/10th blade diameter) so it cannot be used for V-groove processing.

Basic Information

Use Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal Double Angle (θ) 90 Work Material Aluminum / Copper / Graphite / Resin
Single Blade / Double Blade Single Blade Peripheral Blade Availability None Tool Material Type Carbide
Coating Presence None

Additional Products in this Category

Tech Support