• Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 p.m. 9/22/2018 to 4:00 p.m. (CDT) 9/23/2018. We apologize for the inconvenience.

Dsub Connector, Solder/Press-fit (High-density)

Dsub Connector, Solder/Press-fit (High-density)

Inexpensiveness achieved high-density D-sub Connector. Allows for high-density wiring without increasing wiring space.

  • For Signal
  • Connection between Boards
  • PLC
  • RS422
  • Solder
  • Gold Plated
  • Screw Lock

● High-density model D-sub connectors that use the same size shells as conventional D-sub connectors, but a higher number of cores than conventional models. Therefore, high-densifying of the wiring can be achieved by replacing the conventional model D-sub.
● Since soldering is used in wiring, special tools are not required.
● The contact arrangement of the 15-core is MIL-C-24308 compliant, so that other companies' high density D-sub 15-core models with the same standard can be connected. Therefore it allows for a wide range of uses such as with OA devices and electronic devices.

Rated Current Peak Voltage (1 minute) Insulation Resistance (500V DC) Contact Resistance Operating Temperature
1A 750 VDCr.m.s 1000 MΩ or more Below 30 mΩ -55°C – +85°C

Compatible Wire Size: AWG24 – AWG28 or 0.2 mm2 – 0.08 mm2

· 15-core models can be coupled with other company's products as well. However, all other core numbers cannot be connected since the same number of cores are not available with other companies. Connection should be possible with matching core numbers. However, thoroughly check the specifications in advance.
· Hood and connecting fixing bracket are not attached to the connector. Purchase separately.
· Contact arrangement is 3-row because of high density. (However, 78-core is 4-row.)

· The recommended temperature when soldering is 265 °C (±5 °C), and the time is about 5 ~ 7 seconds.


Dsub Connector, Solder/Press-fit (High-density):Related Image

Model Number Number of Cores Type
HD-15SP 15 Male
HD-26SP 26
HD-44SP 44
HD-62SP 62
HD-78SP 78
HD-15SS 15 Female
HD-26SS 26
HD-44SS 44
HD-62SS 62
HD-78SS 78

More Information

Dsub Connector, Solder/Press-fit (High-density):Related Image

Material / Finish

Item Materials Finish
(Press contact)
Copper Alloy Nickel-plating underlay
Contact part gold plated
Insulator Polybutylene
Terephthalate resin
UL94V-0, White
Shell Steel Tin Plating
Part Number
Part NumberVolume DiscountDays to Ship RoHSApplicable pin/contact Cores

6 Days or more

6Male (Plug)15

6 Days or more

6Female (Socket)15

6 Days or more

6Male (Plug)26

6 Days or more

6Female (Socket)26

6 Days or more

6Male (Plug)44

6 Days or more

6Female (Socket)44

6 Days or more

6Male (Plug)62

6 Days or more

6Female (Socket)62

6 Days or more

6Male (Plug)78

6 Days or more

6Female (Socket)78


  1. 1

Compatible Wire Size

Connector Type Compatible Wire Size
AWG Size Conductor Cross-Sectional Area (mm2)
Solder Connection Type Finer than 20 Less than 0.53
Pressure Weld Connection Type 1.27 mm Pitch 28 Flat Cable
High-density Solder Connection Type 22 ~ 28 0.08 ~ 0.32
Terminal Block Built in Type 14 ~ 26 2.0 ~ 1.5
High Current Type For 10A 16 ~ 12 0.3 ~ 1.25
For 20A 12 ~ 18 0.75 ~ 3.5
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.

Panel Size

Solder Connection / Pressure Weld Connection Type
● Dimension Table
Number of Cores A±0.15 B±0.2 C±0.2
High Current Type High-density type Others
- 15 9 24.99 20.6 12.0
3 26 15 33.32 28.8 12.0
5 44 25 47.04 42.6 12.0
8 62 37 63.50 59.0 12.0
- 78 50 61.11 56.6 15.2
Mounting holes for panel front and rear mounting are common.

Pressure Weld Connection Type

a. Dimensions when mounting the connector from panel front
● Dimension Table
Number of Cores A1 B1
9 24.99 22.00
15 33.32 30.30
25 47.04 44.00
37 63.05 60.50
b. Dimensions when mounting the connector from panel rear
● Dimension Table
Number of Cores A2 B2
9 24.99 20.20
15 33.32 28.60
25 47.04 42.50
37 63.05 59.20

Contact Arrangement Diagram

Shell Size Group E A B C D
Standard Type
High-density type

Basic Information

Connector Shape Square Type Series Initials D· E· F Dsub Application Board to Cable
Allowable Current(A) 1 Wire connection method Solder Connection direction Straight
IP Rating N/A Peak Voltage(Vmax) 500 Detaching Method Others

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support