High EMI Countermeasures Cable/High-density Dsub Selection Type (Part Numbers)

High EMI Countermeasures Cable/High-density Dsub Selection Type

Cable that converts noise into heat is used

  • PLC
  • EMI Countermeasure
  • RS232
  • Solder
  • Gold Plated

● Features the D-sub connector that can be used for connection of various control devices, PCs, etc. Features two models of cables: the noiseBEAT cable that reduces noise by heat conversion, and the pair-shielded twisted pair cable that is aluminum foil coated.


· Please use within a range of 15 m or less if used in RS-232C communication.
· The noiseBEAT cable is a registered trademark of NTT Advanced Technology Corporation.
· The temperature increase by the heat conversion of the noise is roughly 0.1°C.
· Sheath peeling length can be designated as alteration service only for those with terminals or mark tubes.
· Specifying the length of the connector side ground cable is not supported.
· Custom number for common crossover connection is available in RS-232C cables.
· High density (3-row) model for core number H15.


Wiring and Wire Color Page
>>Click here
Component Page
>>Click here

Specifications

High EMI Countermeasures Cable:Related Image

L (m)~ 0.91 ~ 44.1 ~ 50
Tolerance+20mm+50mm+ 3% of Total Length
* The tolerance of the specified length is as described above.

Connector TypeShape Specification TypeOutline Image DrawingCable TypeNumber of CoresSpecified Length (m)
SPEDJ
EMI Countermeasure
M2.6 Short Screw

Japan Aviation Electronics Industry, Limited




SPEDJL
EMI Countermeasure
M2.6 Long Screw

Japan Aviation Electronics Industry, Limited




SPEDU
EMI Countermeasure
#4-40 Short Screw

Japan Aviation Electronics Industry, Limited




SPEDUL
EMI Countermeasure
#4-40 Long Screw

Japan Aviation Electronics Industry, Limited
P
(Male)
High EMI Countermeasures Cable:Related ImageHigh EMI Countermeasures Cable:Related Image

High EMI Countermeasures Cable:Related Image
90.2

~

50
Can be specified
at 0.1 m
increments
15
H15
25
S
(Female)
High EMI Countermeasures Cable:Related Image9
15
H15
25
PP
(Male / Male)
High EMI Countermeasures Cable:Related Image9
15
H15
25
SS
(Female / Female)
High EMI Countermeasures Cable:Related Image9
15
H15
25
PS
(Male / Female)
High EMI Countermeasures Cable:Related Image9
15
H15
25

Connector TypeShape Specification TypeOutline Image Drawing (Unit: mm)Cable TypeNumber of CoresSpecified Length (m)
SPEDJ
EMI Countermeasure
M2.6 Short Screw

Japan Aviation Electronics Industry, Limited




SPEDJL
EMI Countermeasure
M2.6 Long Screw

Japan Aviation Electronics Industry, Limited




SPEDU
EMI Countermeasure
#4-40 Short Screw

Japan Aviation Electronics Industry, Limited




SPEDUL
EMI Countermeasure
#4-40 Long Screw

Japan Aviation Electronics Industry, Limited
PY
(Male / Y Terminal)
With Pin No. Insertion
Mark Tube
High EMI Countermeasures Cable:Related ImageHigh EMI Countermeasures Cable:Related Image

High EMI Countermeasures Cable:Related Image
90.2

~

50
Can be specified
at 0.1 m
increments
15
H15
25
SY
(Female / Y Terminal)
With Pin No. Insertion
Mark Tube
High EMI Countermeasures Cable:Related Image9
15
H15
25
PT
(Male / Loose Wires)
With Pin No. Insertion
Mark Tube
High EMI Countermeasures Cable:Related Image9
15
H15
25
ST
(Female / Loose Wires)
With Pin No. Insertion
Mark Tube
High EMI Countermeasures Cable:Related Image9
15
H15
25
Part Number
Part NumberVolume DiscountDays to Ship Hood screw CN1 CN2 Number of cores Shield Cable Type Specified Length
(m)

Loading...

Compatible Wire Size

Connector Type Compatible Wire Size
AWG Size Conductor Cross-Sectional Area (mm2)
Solder Connection Type Finer than 20 Less than 0.53
Pressure Weld Connection Type 1.27 mm Pitch 28 Flat Cable
High-density Solder Connection Type 22 ~ 28 0.08 ~ 0.32
Terminal Block Built in Type 14 ~ 26 2.0 ~ 1.5
High Current Type For 10A 16 ~ 12 0.3 ~ 1.25
For 20A 12 ~ 18 0.75 ~ 3.5
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.

Panel Size

Solder Connection / Pressure Weld Connection Type
● Dimension Table
Number of Cores A±0.15 B±0.2 C±0.2
High Current Type High-density type Others
- 15 9 24.99 20.6 12.0
3 26 15 33.32 28.8 12.0
5 44 25 47.04 42.6 12.0
8 62 37 63.50 59.0 12.0
- 78 50 61.11 56.6 15.2
Mounting holes for panel front and rear mounting are common.

Pressure Weld Connection Type

a. Dimensions when mounting the connector from panel front
● Dimension Table
Number of Cores A1 B1
9 24.99 22.00
15 33.32 30.30
25 47.04 44.00
37 63.05 60.50
b. Dimensions when mounting the connector from panel rear
● Dimension Table
Number of Cores A2 B2
9 24.99 20.20
15 33.32 28.60
25 47.04 42.50
37 63.05 59.20

Contact Arrangement Diagram

Shell Size Group E A B C D
Standard Type
High-density type

Basic Information

Connector type Dsub Connector manufacturer Japan Aviation Electronics Industry, Limited Connector shape Straight
Processing method Solder Cable shape Round Hood EMI Protection Plastic
Cable Rated Voltage(V) Less than 100 Cable Standard (UL / CSA) UL Cable Color Navy
Twisted pair Included AWG 25

Additional Products in this Category

Tech Support