• Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 p.m. 9/22/2018 to 4:00 p.m. (CDT) 9/23/2018. We apologize for the inconvenience.

Precision Linear Shafts - Set Screw Grooved (Part Numbers)

Precision Linear Shafts - Set Screw Grooved:
[ ! ]Annealing could reduce hardness at set screw grooved shaft end machined areas (effective thread length + approx. 10mm).
[ ! ]Circularity, Straightness, Perpendicularity, Concentricity, Changes in Hardness >> P.111
[ ! ]Features of Low Temp. Black Chrome Plating >> P.128
・Materials
Type [ M ]Material [ H ]Hardness [ S ]Surface Treatment
Solid, Both Ends Grooved Solid, One End Grooved One End Tapped One End Threaded One End Threaded with O.D. same as Shaft O.D.
SFJQ SFJS SFTS SFNS SFQS 52100 Bearing Steel Effective Hardened Depth of Induction Hardened >>P.112
52100 Bearing Steel 58HRC~
440C Stainless Steel 56HRC~
-
SSFJQ SSFJS SSFTS SSFNS SSFQS 440C Stainless Steel
PSFJQ PSFJS PSFTS PSFNS PSFQS 52100 Bearing Steel Hard Chrome Plating
Plating Hardness: HV750 ~
Plating Thickness: 5µ or More
PSSFJQ PSSFJS PSSFTS PSSFNS PSSFQS 440C Stainless Steel

Specifications

Part Number-L-M-F-B-P-V-K-G-Q
SFJQ16-100        -V10-K5-G10-Q5
SSFTS20-500-M10          -G10-Q7
PSFNS8-650  -F10-B8-P4    -G20-Q4
Part NumberL
1mm Increment
Slot DimensionD Tol.C
TypeDV, G (0.1mm Increment)K, QD1g6
Solid, Both Ends Grooved
SFJQ
SSFJQ
PSFJQ
PSSFJQ
620~6005~184   5-0.004
-0.012
0.5 or Less
820~8005~2445  7-0.005
-0.014
0.5 or Less
1020~8005~3045  9-0.005
-0.014
0.5 or Less
1220~10005~36 5  10-0.006
-0.017
0.5 or Less
1325~10005~39 5  11-0.006
-0.017
0.5 or Less
1525~10005~45 56 13-0.006
-0.017
0.5 or Less
1630~12005~48 56 14-0.006
-0.017
0.5 or Less
1830~12005~54 56 16-0.006
-0.017
0.5 or Less
2030~12006~60  6718-0.007
-0.020
1.0 or Less
2535~12006~75  6723-0.007
-0.020
1.0 or Less
3035~15006~90   728-0.007
-0.020
1.0 or Less

Part NumberL
1mm Increment
Slot DimensionD Tol.C
TypeDG (0.1mm Increment)QD1g6
Solid, One End Grooved
SFJS
SSFJS
PSFJS
PSSFJS
620~6005~184   5-0.004
-0.012
0.5 or Less
820~8005~2445  7-0.005
-0.014
0.5 or Less
1020~8005~3045  9-0.005
-0.014
0.5 or Less
1220~10005~36 5  10-0.006
-0.017
0.5 or Less
1325~10005~39 5  11-0.006
-0.017
0.5 or Less
1525~10005~45 56 13-0.006
-0.017
0.5 or Less
1630~12005~48 56 14-0.006
-0.017
0.5 or Less
1830~12005~54 56 16-0.006
-0.017
0.5 or Less
2030~12006~60  6718-0.007
-0.020
1.0 or Less
2535~12006~75  6723-0.007
-0.020
1.0 or Less
3035~15006~90   728-0.007
-0.020
1.0 or Less

Part NumberL
1mm Increment
One End TappedSlot DimensionD Tol.C
TypeDM (Coarse Thread)G (0.1mm Increment)QD1g6
One End Tapped Type
SFTS
SSFTS
PSFTS
PSSFTS
620~6003         5~184   5-0.004
-0.012
0.5 or Less
820~800345       5~2445  7-0.005
-0.014
0.5 or Less
1020~8003456      5~3045  9-0.005
-0.014
0.5 or Less
1220~1000 4568     5~36 5  10-0.006
-0.017
0.5 or Less
1325~1000 4568     5~39 5  11-0.006
-0.017
0.5 or Less
1525~1000 456810    5~45 56 13-0.006
-0.017
0.5 or Less
1630~1200 456810    5~48 56 14-0.006
-0.017
0.5 or Less
1830~1200 45681012   5~54 56 16-0.006
-0.017
0.5 or Less
2030~1200 45681012   6~60  6718-0.007
-0.020
1.0 or Less
2535~1200 4568101216  6~75  6723-0.007
-0.020
1.0 or Less
3035~1500   6810121620246~90   728-0.007
-0.020
1.0 or Less
[ ! ]V+K/2+1≤L/2 or G+Q/2+1≤L/2 is required. [ ! ]For One End Tapped Type, G≤L-Mx2-Qx2 is required.
[ ! ]When Mx2.5+4≥L, tap pilot holes may go through.

Part Number1mm IncrementSelectionSlot DimensionD Tol.(Y)Max.RC
TypeDLFBPG (1mm Increment)Q (Selection)D1g6
Threaded Type
SFNS
SSFNS
PSFNS
PSSFNS
625~5982≤F≤Px5(When P≤6)
B≤F-2

(When P=8, 10)
B≤F-3

(When P≥12)
B≤F-5

[ ! ]B≥Pitchx3
3456       5~184   5-0.004
-0.012
6000.3 or Less0.5 or Less
825~79834568      5~2445  7-0.005
-0.014
8000.3 or Less0.5 or Less
1025~798 456810     5~3045  9-0.005
-0.014
8000.3 or Less0.5 or Less
1225~998  5681012    5~36 5  11-0.006
-0.017
10000.3 or Less0.5 or Less
1325~998  5681012    5~39 5  11-0.006
-0.017
10000.3 or Less0.5 or Less
1525~998  5681012    5~45 56 13-0.006
-0.017
10000.3 or Less0.5 or Less
1625~1198  568101216   5~48 56 14-0.006
-0.017
12000.3 or Less0.5 or Less
1825~1198  568101216   5~54 56 16-0.006
-0.017
12000.3 or Less0.5 or Less
2025~1198   6810121620  6~60  6718-0.007
-0.020
12000.3 or Less1.0 or Less
2525~1198    81012162024 6~75  6723-0.007
-0.020
12000.3 or Less1.0 or Less
3025~1498    81012162024306~90   728-0.007
-0.020
15000.3 or Less1.0 or Less

Part Number1mm IncrementSlot DimensionD Tol.(Y)Max.C
TypeDLBG (1mm Increment)Q (Selection)D1g6
One End Threaded with O.D. same as Shaft O.D.
SFQS
SSFQS
PSFQS
PSSFQS
625~598Pitchx3≤B≤Mx5


[ ! ]For One End Threaded with O.D. same as Shaft O.D., L dimensions have priority, thus the effective thread length will be B-(Pitchx2).
5~184   5-0.004
-0.012
6000.5 or Less
825~7985~2445  7-0.005
-0.014
8000.5 or Less
1025~7985~3045  9-0.005
-0.014
8000.5 or Less
1225~9985~36 5  11-0.006
-0.017
10000.5 or Less
1625~11985~48 56 14-0.006
-0.017
12000.5 or Less
2025~11986~60  6718-0.007
-0.020
12001.0 or Less
3025~14986~90   728-0.007
-0.020
15001.0 or Less
[ ! ]V+K/2+1≤L/2 or G+Q/2+1≤L/2 is required.

Coarse Thread Dimension
MPitch
30.5
40.7
50.8
61.0
81.25
101.5
121.75
162.0
202.5
243.0
303.5

Alterations

Precision Linear Shafts - Set Screw Grooved:

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
SFJS18-[30-1200/1]-G[5-54/1]-Q[5,​6]
SFJS20-[30-1200/1]-G[6-60/1]-Q[6,​7]
SFJS25-[30-1200/1]-G[6-75/1]-Q[6,​7]
SFJS30-[35-1500/1]-G[6-90/1]-Q7
SFNS6-[20-600/1]-F[2-30/1]-B[2-28/1]-P[3,​4,​5,​6]-G[5-18/1]-Q4
SFNS8-[20-800/1]-F[2-40/1]-B[2-37/1]-P[3,​4,​5,​6,​8]-G[5-24/1]-Q[4,​5]
SFNS10-[20-800/1]-F[2-50/1]-B[2-47/1]-P[4,​5,​6,​8,​10]-G[5-30/1]-Q[4,​5]
SFNS12-[20-1000/1]-F[2-60/1]-B[2-55/1]-P[5,​6,​8,​10,​12]-G[5-36/1]-Q5
SFNS13-[25-1000/1]-F[2-60/1]-B[2-55/1]-P[5,​6,​8,​10,​12]-G[5-39/1]-Q5
SFNS15-[25-1000/1]-F[2-60/1]-B[2-55/1]-P[5,​6,​8,​10,​12]-G[5-45/1]-Q[5,​6]
SFNS16-[30-1200/1]-F[2-80/1]-B[2-75/1]-P[5,​6,​8,​10,​12,​16]-G[5-48/1]-Q[5,​6]
SFNS18-[30-1200/1]-F[2-80/1]-B[2-75/1]-P[5,​6,​8,​10,​12,​16]-G[5-54/1]-Q[5,​6]
SFNS20-[30-1200/1]-F[2-100/1]-B[2-95/1]-P[6,​8,​10,​12,​16,​20]-G[6-60/1]-Q[6,​7]
SFNS25-[30-1200/1]-F[2-120/1]-B[2-115/1]-P[8,​10,​12,​16,​20,​24]-G[6-75/1]-Q[6,​7]
SFNS30-[35-1500/1]-F[2-150/1]-B[2-145/1]-P[8,​10,​12,​16,​20,​24,​30]-G[6-90/1]-Q7
SFQS6-[20-600/1]-B[2-28/1]-G[5-18/1]-Q4
SFQS8-[20-800/1]-B[2-37/1]-G[5-24/1]-Q[4,​5]
SFQS10-[20-800/1]-B[2-47/1]-G[5-30/1]-Q[4,​5]
SFQS12-[20-1000/1]-B[2-55/1]-G[5-36/1]-Q5
SFQS16-[30-1200/1]-B[2-75/1]-G[5-48/1]-Q[5,​6]
SFQS20-[30-1200/1]-B[2-95/1]-G[6-60/1]-Q[6,​7]
SFQS30-[35-1500/1]-B[2-145/1]-G[6-90/1]-Q7
SFTS6-[20-600/1]-M3-G[5-18/1]-Q4
SFTS8-[20-800/1]-M[3,​4,​5]-G[5-24/1]-Q[4,​5]
SFTS10-[20-800/1]-M[3,​4,​5,​6]-G[5-30/1]-Q[4,​5]
SFTS12-[20-1000/1]-M[4,​5,​6,​8]-G[5-36/1]-Q5
SFTS13-[25-1000/1]-M[4,​5,​6,​8]-G[5-39/1]-Q5
SFTS15-[25-1000/1]-M[4,​5,​6,​8,​10]-G[5-45/1]-Q[5,​6]
SFTS16-[30-1200/1]-M[4,​5,​6,​8,​10]-G[5-48/1]-Q[5,​6]
SFTS18-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-G[5-54/1]-Q[5,​6]
SFTS20-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-G[6-60/1]-Q[6,​7]
SFTS25-[30-1200/1]-M[4,​5,​6,​8,​10,​12,​16]-G[6-75/1]-Q[6,​7]
SFTS30-[35-1500/1]-M[6,​8,​10,​12,​16,​20,​24]-G[6-90/1]-Q7
SSFJQ6-[20-600/1]-V[5-18/1]-K4-G[5-18/1]-Q4
SSFJQ8-[20-800/1]-V[5-24/1]-K[4,​5]-G[5-24/1]-Q[4,​5]
SSFJQ10-[20-800/1]-V[5-30/1]-K[4,​5]-G[5-30/1]-Q[4,​5]
SSFJQ12-[20-1000/1]-V[5-36/1]-K5-G[5-36/1]-Q5
SSFJQ13-[25-1000/1]-V[5-39/1]-K5-G[5-39/1]-Q5
SSFJQ15-[25-1000/1]-V[5-45/1]-K[5,​6]-G[5-45/1]-Q[5,​6]
SSFJQ16-[30-1200/1]-V[5-48/1]-K[5,​6]-G[5-48/1]-Q[5,​6]
SSFJQ18-[30-1200/1]-V[5-54/1]-K[5,​6]-G[5-54/1]-Q[5,​6]
SSFJQ20-[30-1200/1]-V[6-60/1]-K[6,​7]-G[6-60/1]-Q[6,​7]
SSFJQ25-[30-1200/1]-V[6-75/1]-K[6,​7]-G[6-75/1]-Q[6,​7]
SSFJQ30-[35-1500/1]-V[6-90/1]-K7-G[6-90/1]-Q7
SSFJS6-[20-600/1]-G[5-18/1]-Q4
SSFJS8-[20-800/1]-G[5-24/1]-Q[4,​5]
SSFJS10-[20-800/1]-G[5-30/1]-Q[4,​5]
SSFJS12-[20-1000/1]-G[5-36/1]-Q5
SSFJS13-[25-1000/1]-G[5-39/1]-Q5
SSFJS15-[25-1000/1]-G[5-45/1]-Q[5,​6]
SSFJS16-[30-1200/1]-G[5-48/1]-Q[5,​6]
SSFJS18-[30-1200/1]-G[5-54/1]-Q[5,​6]
SSFJS20-[30-1200/1]-G[6-60/1]-Q[6,​7]
SSFJS25-[30-1200/1]-G[6-75/1]-Q[6,​7]
SSFJS30-[35-1500/1]-G[6-90/1]-Q7
SSFNS6-[20-600/1]-F[2-30/1]-B[2-28/1]-P[3,​4,​5,​6]-G[5-18/1]-Q4
SSFNS8-[20-800/1]-F[2-40/1]-B[2-37/1]-P[3,​4,​5,​6,​8]-G[5-24/1]-Q[4,​5]
SSFNS10-[20-800/1]-F[2-50/1]-B[2-47/1]-P[4,​5,​6,​8,​10]-G[5-30/1]-Q[4,​5]
SSFNS12-[20-1000/1]-F[2-60/1]-B[2-55/1]-P[5,​6,​8,​10,​12]-G[5-36/1]-Q5
SSFNS13-[25-1000/1]-F[2-60/1]-B[2-55/1]-P[5,​6,​8,​10,​12]-G[5-39/1]-Q5
Part NumberVolume DiscountDays to Ship RoHSBasic Shape Shaft Dia. D
(mm)
End Shape (Left) Material Heat Treated Surface Finish Length L
(mm)
End Section Type B
(mm)
Coarse Thread [M]
(mm)
F
(mm)
G
(mm)
K
(mm)
Thread (Coarse) [P]
(mm)
Thread (Coarse) [Q]
(mm)
V
(mm)

8 Days or more

6Straight18No Machining[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None30 ~ 1200Solid, One End Grooved---5 ~ 54--5 ~ 6-

8 Days or more

6Straight20No Machining[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None30 ~ 1200Solid, One End Grooved---6 ~ 60--6 ~ 7-

8 Days or more

6Straight25No Machining[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None30 ~ 1200Solid, One End Grooved---6 ~ 75--6 ~ 7-

8 Days or more

6Straight30No Machining[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None35 ~ 1500Solid, One End Grooved---6 ~ 90--7-

8 Days or more

6One End Stepped6Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None20 ~ 600One End Threaded2 ~ 28-2 ~ 305 ~ 18-3 ~ 64-

8 Days or more

6One End Stepped8Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None20 ~ 800One End Threaded2 ~ 37-2 ~ 405 ~ 24-3 ~ 84 ~ 5-

8 Days or more

6One End Stepped10Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None20 ~ 800One End Threaded2 ~ 47-2 ~ 505 ~ 30-4 ~ 104 ~ 5-

8 Days or more

6One End Stepped12Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None20 ~ 1000One End Threaded2 ~ 55-2 ~ 605 ~ 36-5 ~ 125-

8 Days or more

6One End Stepped13Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None25 ~ 1000One End Threaded2 ~ 55-2 ~ 605 ~ 39-5 ~ 125-

8 Days or more

6One End Stepped15Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None25 ~ 1000One End Threaded2 ~ 55-2 ~ 605 ~ 45-5 ~ 125 ~ 6-

8 Days or more

6One End Stepped16Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None30 ~ 1200One End Threaded2 ~ 75-2 ~ 805 ~ 48-5 ~ 165 ~ 6-

8 Days or more

6One End Stepped18Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None30 ~ 1200One End Threaded2 ~ 75-2 ~ 805 ~ 54-5 ~ 165 ~ 6-

8 Days or more

6One End Stepped20Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None30 ~ 1200One End Threaded2 ~ 95-2 ~ 1006 ~ 60-6 ~ 206 ~ 7-

8 Days or more

6One End Stepped25Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None30 ~ 1200One End Threaded2 ~ 115-2 ~ 1206 ~ 75-8 ~ 246 ~ 7-

8 Days or more

6One End Stepped30Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None35 ~ 1500One End Threaded2 ~ 145-2 ~ 1506 ~ 90-8 ~ 307-

8 Days or more

6Straight6Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None20 ~ 600One End Threaded Shafts with O.D. same as Shaft O.D.2 ~ 28--5 ~ 18--4-

8 Days or more

6Straight8Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None20 ~ 800One End Threaded Shafts with O.D. same as Shaft O.D.2 ~ 37--5 ~ 24--4 ~ 5-

8 Days or more

6Straight10Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None20 ~ 800One End Threaded Shafts with O.D. same as Shaft O.D.2 ~ 47--5 ~ 30--4 ~ 5-

8 Days or more

6Straight12Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None20 ~ 1000One End Threaded Shafts with O.D. same as Shaft O.D.2 ~ 55--5 ~ 36--5-

8 Days or more

6Straight16Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None30 ~ 1200One End Threaded Shafts with O.D. same as Shaft O.D.2 ~ 75--5 ~ 48--5 ~ 6-

8 Days or more

6Straight20Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None30 ~ 1200One End Threaded Shafts with O.D. same as Shaft O.D.2 ~ 95--6 ~ 60--6 ~ 7-

8 Days or more

6Straight30Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None35 ~ 1500One End Threaded Shafts with O.D. same as Shaft O.D.2 ~ 145--6 ~ 90--7-

8 Days or more

6Straight6Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None20 ~ 600One End Tapped-3-5 ~ 18--4-

8 Days or more

6Straight8Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None20 ~ 800One End Tapped-3 ~ 5-5 ~ 24--4 ~ 5-

8 Days or more

6Straight10Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None20 ~ 800One End Tapped-3 ~ 6-5 ~ 30--4 ~ 5-

8 Days or more

6Straight12Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None20 ~ 1000One End Tapped-4 ~ 8-5 ~ 36--5-

8 Days or more

6Straight13Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None25 ~ 1000One End Tapped-4 ~ 8-5 ~ 39--5-

8 Days or more

6Straight15Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None25 ~ 1000One End Tapped-4 ~ 10-5 ~ 45--5 ~ 6-

8 Days or more

6Straight16Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None30 ~ 1200One End Tapped-4 ~ 10-5 ~ 48--5 ~ 6-

8 Days or more

6Straight18Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None30 ~ 1200One End Tapped-4 ~ 12-5 ~ 54--5 ~ 6-

8 Days or more

6Straight20Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None30 ~ 1200One End Tapped-4 ~ 12-6 ~ 60--6 ~ 7-

8 Days or more

6Straight25Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None30 ~ 1200One End Tapped-4 ~ 16-6 ~ 75--6 ~ 7-

8 Days or more

6Straight30Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~None35 ~ 1500One End Tapped-6 ~ 24-6 ~ 90--7-

8 Days or more

6Straight6Set Screw Groove[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None20 ~ 600Solid, Both Ends Grooved---5 ~ 184-45 ~ 18

8 Days or more

6Straight8Set Screw Groove[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None20 ~ 800Solid, Both Ends Grooved---5 ~ 244 ~ 5-4 ~ 55 ~ 24

8 Days or more

6Straight10Set Screw Groove[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None20 ~ 800Solid, Both Ends Grooved---5 ~ 304 ~ 5-4 ~ 55 ~ 30

8 Days or more

6Straight12Set Screw Groove[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None20 ~ 1000Solid, Both Ends Grooved---5 ~ 365-55 ~ 36

8 Days or more

6Straight13Set Screw Groove[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None25 ~ 1000Solid, Both Ends Grooved---5 ~ 395-55 ~ 39

8 Days or more

6Straight15Set Screw Groove[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None25 ~ 1000Solid, Both Ends Grooved---5 ~ 455 ~ 6-5 ~ 65 ~ 45

8 Days or more

6Straight16Set Screw Groove[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None30 ~ 1200Solid, Both Ends Grooved---5 ~ 485 ~ 6-5 ~ 65 ~ 48

8 Days or more

6Straight18Set Screw Groove[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None30 ~ 1200Solid, Both Ends Grooved---5 ~ 545 ~ 6-5 ~ 65 ~ 54

8 Days or more

6Straight20Set Screw Groove[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None30 ~ 1200Solid, Both Ends Grooved---6 ~ 606 ~ 7-6 ~ 76 ~ 60

8 Days or more

6Straight25Set Screw Groove[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None30 ~ 1200Solid, Both Ends Grooved---6 ~ 756 ~ 7-6 ~ 76 ~ 75

8 Days or more

6Straight30Set Screw Groove[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None35 ~ 1500Solid, Both Ends Grooved---6 ~ 907-76 ~ 90

8 Days or more

6Straight6No Machining[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None20 ~ 600Solid, One End Grooved---5 ~ 18--4-

8 Days or more

6Straight8No Machining[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None20 ~ 800Solid, One End Grooved---5 ~ 24--4 ~ 5-

8 Days or more

6Straight10No Machining[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None20 ~ 800Solid, One End Grooved---5 ~ 30--4 ~ 5-

8 Days or more

6Straight12No Machining[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None20 ~ 1000Solid, One End Grooved---5 ~ 36--5-

8 Days or more

6Straight13No Machining[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None25 ~ 1000Solid, One End Grooved---5 ~ 39--5-

8 Days or more

6Straight15No Machining[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None25 ~ 1000Solid, One End Grooved---5 ~ 45--5 ~ 6-

8 Days or more

6Straight16No Machining[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None30 ~ 1200Solid, One End Grooved---5 ~ 48--5 ~ 6-

8 Days or more

6Straight18No Machining[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None30 ~ 1200Solid, One End Grooved---5 ~ 54--5 ~ 6-

8 Days or more

6Straight20No Machining[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None30 ~ 1200Solid, One End Grooved---6 ~ 60--6 ~ 7-

8 Days or more

6Straight25No Machining[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None30 ~ 1200Solid, One End Grooved---6 ~ 75--6 ~ 7-

8 Days or more

6Straight30No Machining[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None35 ~ 1500Solid, One End Grooved---6 ~ 90--7-

8 Days or more

6One End Stepped6Threaded[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None20 ~ 600One End Threaded2 ~ 28-2 ~ 305 ~ 18-3 ~ 64-

8 Days or more

6One End Stepped8Threaded[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None20 ~ 800One End Threaded2 ~ 37-2 ~ 405 ~ 24-3 ~ 84 ~ 5-

8 Days or more

6One End Stepped10Threaded[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None20 ~ 800One End Threaded2 ~ 47-2 ~ 505 ~ 30-4 ~ 104 ~ 5-

8 Days or more

6One End Stepped12Threaded[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None20 ~ 1000One End Threaded2 ~ 55-2 ~ 605 ~ 36-5 ~ 125-

8 Days or more

6One End Stepped13Threaded[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~None25 ~ 1000One End Threaded2 ~ 55-2 ~ 605 ~ 39-5 ~ 125-

Loading...

Lead Time

Basic Information

End Shape (Right) Set Screw Groove Shaft End Perpendicularity Perpendicularity (0.2) Shaft Fits Tolerance g6

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Automation Components Group
Tel:+52-442-672-7661
Mon. - Fri. 8 a.m. - 6 p.m. Sat. 8 a.m. - 12 p.m