• Debido al Tifón (Hagibis) que azotó Japón esta semana (12 de Oct), algunos productos de importación se ha visto afectados. Gracias por su comprensión.
    Due to the Typhoon (Hagibis) in Japan last week (12 Oct), some imported products may be delayed. Thank you for your understanding.

Rolled Ball Screws -Shaft Ends Configurable- -Standard Nuts- (Part Numbers)

Rolled Ball Screws -Shaft Ends Configurable- -Standard Nuts-

Rolled Ball Screws suitable for transfer application

(i)Caution

Rolled Ball Screws -Shaft Ends Configurable- -Standard Nuts-:Related Image
・Materials
Nut TypeTypeScrew ShaftNut
[ M ]Material[ H ]Hardness[ S ]Surface Treatment[ M ]Material[ H ]Hardness[ S ]Surface Treatment
Standard
Nut
FBSSR1055 Carbon SteelInduction Hardened
56~62HRC
Phosphate Conversion CoatingJIS SCM420Carburized
58~62HRC
Low Temp.
Black Chrome
(Screw Shaft 8 and 10 are applied with Phosphate Conversion Coating)
FBSSZ-
[ ! ]Filled with lithium soap based grease (Alvania Grease S2 made by Showa Shell Sekiyu K.K).

Specifications

Part Number-L-F-P-S-V-U-C-KC-E-SC-X-Z-G-Q-K-N-J-JC-H-Y-W-R
FBSSRAA1004
FBSSZDJ2010
-
-
450
1200

-

F36

-

P12

-

S60

-

V15

-

U15

-

G20

-

Q15

-

N10
VTolerance
6-0.002
-0.007
8-0.002
-0.008
10-0.002
-0.015
12, 15-0.003
-0.018
20, 25-0.004
-0.021
Accuracy GradePart Number1mm Increment1mm IncrementSelection1mm IncrementSelection
TypeLeft End Fixed SideRight End Fixed SideScrew Shaft O.D.LeadLFPSUCKCSCXZVE (Coarse)GKJJCHYRWQN (Coarse)
C10FBSSR
FBSSZ
A
B
C
D
E
F
G
H
A
J
K
M
N
P
R
S
0802100~4005≤F≤Px3
5≤S≤Vx4
V≤U≤Vx2
b1<C≤60
F-C-KC≥2
KC=0 or KC≥2
5≤SC≤Px3 SC≤F-2
5≤X≤20
P≥4 P≥V/2
When V=6, P=4
When V≥8, P≤V−2
64
5
6
8
10
5≤G≤Qx3
5≤K≤Qx3
3≤J≤20
H≥Q-2
5≤Y≤20
R≤Q-2
6-
0804100~3806
1002150~58586-
1004150~6006
1010150~5856
1204150~800810684
1210150~800810
1405150~8008106810456
1505150~1200101281012568
1510200~1200
1520
2005200~2000101215810121556810
2010250~2000
2020
2505200~20001520101215206810
2510300~2000
2525
2806200~20001520101215206810
3210300~2000202510121520256810
3232
[ ! ]For FBSSZ type, sizes 0804, 1002 and 1010 are not available. [ ! ]E≤P-4 [ ! ]N≤Q-4

Alterations

Rolled Ball Screws -Shaft Ends Configurable- -Standard Nuts-:Related Image

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
FBSSRHP2806-[200-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,​20]-U[15-40/1]-SC[5-53/1]-G[5-60/1]-Q[10,​12,​15,​20]-Y[5-20/1]-R[3-18/1]
FBSSRHP3210-[300-2000/1]-F[5-69/1]-P[4-23/1]-S[5-100/1]-V[20,​25]-U[20-50/1]-SC[5-68/1]-G[5-75/1]-Q[10,​12,​15,​20,​25]-Y[5-20/1]-R[3-23/1]
FBSSRHP3232-[300-2000/1]-F[5-69/1]-P[4-23/1]-S[5-100/1]-V[20,​25]-U[20-50/1]-SC[5-68/1]-G[5-75/1]-Q[10,​12,​15,​20,​25]-Y[5-20/1]-R[3-23/1]
FBSSRHR1002-[150-585/1]-F[5-13/1]-P[4,​5,​6]-S[5-32/1]-V8-U[8-16/1]-X[5-11/1]-Z[5-8/1]-G[5-18/1]-Q6-Y[5-18/1]-R[3-4/1]
FBSSRHR1004-[150-600/1]-F[5-13/1]-P[4,​5,​6]-S[5-32/1]-V8-U[8-16/1]-X[5-11/1]-Z[5-8/1]-G[5-18/1]-Q6-Y[5-18/1]-R[3-4/1]
FBSSRHR1010-[150-585/1]-F[5-13/1]-P[4,​5,​6]-S[5-32/1]-V8-U[8-16/1]-X[5-11/1]-Z[5-8/1]-G[5-18/1]-Q6-Y[5-18/1]-R[3-4/1]
FBSSRHR1204-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,​10]-U[8-20/1]-X[5-20/1]-Z[5-8/1]-G[5-24/1]-Q[6,​8]-Y[5-20/1]-R[3-6/1]
FBSSRHR1210-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,​10]-U[8-20/1]-X[5-20/1]-Z[5-8/1]-G[5-24/1]-Q[6,​8]-Y[5-20/1]-R[3-6/1]
FBSSRHR1405-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,​10]-U[8-20/1]-X[5-20/1]-Z[5-8/1]-G[5-30/1]-Q[6,​8,​10]-Y[5-20/1]-R[3-8/1]
FBSSRHR1505-[150-1200/1]-F[5-30/1]-P[4-10/1]-S[5-48/1]-V[10,​12]-U[10-24/1]-X[5-20/1]-Z[5-8/1]-G[5-36/1]-Q[8,​10,​12]-Y[5-20/1]-R[3-10/1]
FBSSRHR1510-[200-1200/1]-F[5-30/1]-P[4-10/1]-S[5-48/1]-V[10,​12]-U[10-24/1]-X[5-20/1]-Z[5-8/1]-G[5-36/1]-Q[8,​10,​12]-Y[5-20/1]-R[3-10/1]
FBSSRHR1520-[200-1200/1]-F[5-30/1]-P[4-10/1]-S[5-48/1]-V[10,​12]-U[10-24/1]-X[5-20/1]-Z[5-8/1]-G[5-36/1]-Q[8,​10,​12]-Y[5-20/1]-R[3-10/1]
FBSSRHR2005-[200-2000/1]-F[5-39/1]-P[4-13/1]-S[5-60/1]-V[10,​12,​15]-U[10-30/1]-X[5-20/1]-Z[5-10/1]-G[5-45/1]-Q[8,​10,​12,​15]-Y[5-20/1]-R[3-13/1]
FBSSRHR2010-[250-2000/1]-F[5-39/1]-P[4-13/1]-S[5-60/1]-V[10,​12,​15]-U[10-30/1]-X[5-20/1]-Z[5-10/1]-G[5-45/1]-Q[8,​10,​12,​15]-Y[5-20/1]-R[3-13/1]
FBSSRHR2020-[250-2000/1]-F[5-39/1]-P[4-13/1]-S[5-60/1]-V[10,​12,​15]-U[10-30/1]-X[5-20/1]-Z[5-10/1]-G[5-45/1]-Q[8,​10,​12,​15]-Y[5-20/1]-R[3-13/1]
FBSSRHR2505-[200-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,​20]-U[15-40/1]-X[5-20/1]-Z[5-14/1]-G[5-60/1]-Q[10,​12,​15,​20]-Y[5-20/1]-R[3-18/1]
FBSSRHR2510-[300-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,​20]-U[15-40/1]-X[5-20/1]-Z[5-14/1]-G[5-60/1]-Q[10,​12,​15,​20]-Y[5-20/1]-R[3-18/1]
FBSSRHR2525-[300-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,​20]-U[15-40/1]-X[5-20/1]-Z[5-14/1]-G[5-60/1]-Q[10,​12,​15,​20]-Y[5-20/1]-R[5-18/1]
FBSSRHR2806-[200-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,​20]-U[15-40/1]-X[5-20/1]-Z[5-14/1]-G[5-60/1]-Q[10,​12,​15,​20]-Y[5-20/1]-R[3-18/1]
FBSSRHR3210-[300-2000/1]-F[5-69/1]-P[4-23/1]-S[5-100/1]-V[20,​25]-U[20-50/1]-X[5-20/1]-Z[5-20/1]-G[5-75/1]-Q[10,​12,​15,​20,​25]-Y[5-20/1]-R[3-23/1]
FBSSRHR3232-[300-2000/1]-F[5-69/1]-P[4-23/1]-S[5-100/1]-V[20,​25]-U[20-50/1]-X[5-20/1]-Z[5-20/1]-G[5-75/1]-Q[10,​12,​15,​20,​25]-Y[5-20/1]-R[3-23/1]
FBSSRHS1204-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,​10]-U[8-20/1]-E[4,​5,​6,​8]-X[5-20/1]-Z[5-8/1]-G[5-24/1]-Q[6,​8]-Y[5-20/1]-R[3-6/1]
FBSSRHS1210-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,​10]-U[8-20/1]-E[4,​5,​6,​8]-X[5-20/1]-Z[5-8/1]-G[5-24/1]-Q[6,​8]-Y[5-20/1]-R[3-6/1]
FBSSRHS1405-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,​10]-U[8-20/1]-E[4,​5,​6,​8]-X[5-20/1]-Z[5-8/1]-G[5-30/1]-Q[6,​8,​10]-Y[5-20/1]-R[3-8/1]
FBSSRHS1505-[150-1200/1]-F[5-30/1]-P[4-10/1]-S[5-48/1]-V[10,​12]-U[10-24/1]-E[4,​5,​6,​8,​10]-X[5-20/1]-Z[5-8/1]-G[5-36/1]-Q[8,​10,​12]-Y[5-20/1]-R[3-10/1]
FBSSRHS1510-[200-1200/1]-F[5-30/1]-P[4-10/1]-S[5-48/1]-V[10,​12]-U[10-24/1]-E[4,​5,​6,​8,​10]-X[5-20/1]-Z[5-8/1]-G[5-36/1]-Q[8,​10,​12]-Y[5-20/1]-R[3-10/1]
FBSSRHS1520-[200-1200/1]-F[5-30/1]-P[4-10/1]-S[5-48/1]-V[10,​12]-U[10-24/1]-E[4,​5,​6,​8,​10]-X[5-20/1]-Z[5-8/1]-G[5-36/1]-Q[8,​10,​12]-Y[5-20/1]-R[3-10/1]
FBSSRHS2005-[200-2000/1]-F[5-39/1]-P[4-13/1]-S[5-60/1]-V[10,​12,​15]-U[10-30/1]-E[4,​5,​6,​8,​10]-X[5-20/1]-Z[5-10/1]-G[5-45/1]-Q[8,​10,​12,​15]-Y[5-20/1]-R[3-13/1]
FBSSRHS2010-[250-2000/1]-F[5-39/1]-P[4-13/1]-S[5-60/1]-V[10,​12,​15]-U[10-30/1]-E[4,​5,​6,​8,​10]-X[5-20/1]-Z[5-10/1]-G[5-45/1]-Q[8,​10,​12,​15]-Y[5-20/1]-R[3-13/1]
FBSSRHS2020-[250-2000/1]-F[5-39/1]-P[4-13/1]-S[5-60/1]-V[10,​12,​15]-U[10-30/1]-E[4,​5,​6,​8,​10]-X[5-20/1]-Z[5-10/1]-G[5-45/1]-Q[8,​10,​12,​15]-Y[5-20/1]-R[3-13/1]
FBSSRHS2505-[200-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,​20]-U[15-40/1]-E[4,​5,​6,​8,​10]-X[5-20/1]-Z[5-14/1]-G[5-60/1]-Q[10,​12,​15,​20]-Y[5-20/1]-R[3-18/1]
FBSSRHS2510-[300-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,​20]-U[15-40/1]-E[4,​5,​6,​8,​10]-X[5-20/1]-Z[5-14/1]-G[5-60/1]-Q[10,​12,​15,​20]-Y[5-20/1]-R[3-18/1]
FBSSRHS2525-[300-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,​20]-U[15-40/1]-E[4,​5,​6,​8,​10]-X[5-20/1]-Z[5-14/1]-G[5-60/1]-Q[10,​12,​15,​20]-Y[5-20/1]-R[5-14/1]
FBSSRHS2806-[200-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,​20]-U[15-40/1]-E[4,​5,​6,​8,​10]-X[5-20/1]-Z[5-14/1]-G[5-60/1]-Q[10,​12,​15,​20]-Y[5-20/1]-R[3-18/1]
FBSSRHS3210-[300-2000/1]-F[5-69/1]-P[4-23/1]-S[5-100/1]-V[20,​25]-U[20-50/1]-E[4,​5,​6,​8,​10]-X[5-20/1]-Z[5-20/1]-G[5-75/1]-Q[10,​12,​15,​20,​25]-Y[5-20/1]-R[3-23/1]
FBSSRHS3232-[300-2000/1]-F[5-69/1]-P[4-23/1]-S[5-100/1]-V[20,​25]-U[20-50/1]-E[4,​5,​6,​8,​10]-X[5-20/1]-Z[5-20/1]-G[5-75/1]-Q[10,​12,​15,​20,​25]-Y[5-20/1]-R[3-23/1]
FBSSZAA0802-[100-400/1]
FBSSZAA1004-[150-600/1]
FBSSZAA1204-[150-800/1]
FBSSZAA1210-[150-800/1]
FBSSZAA1405-[150-800/1]
FBSSZAA1505-[150-1200/1]
FBSSZAA1510-[200-1200/1]
FBSSZAA1520-[200-1200/1]
FBSSZAA2005-[200-2000/1]
FBSSZAA2010-[250-2000/1]
FBSSZAA2020-[250-2000/1]
FBSSZAA2505-[200-2000/1]
FBSSZAA2510-[300-2000/1]
FBSSZAA2525-[300-2000/1]
FBSSZAA2806-[200-2000/1]
FBSSZAA3210-[300-2000/1]
FBSSZAA3232-[300-2000/1]
FBSSZAJ0802-[100-400/1]-F[5-12/1]-P4-S[5-24/1]-V6-U[6-12/1]
FBSSZAJ1004-[150-600/1]-F[5-13/1]-P[4,​5,​6]-S[5-32/1]-V8-U[8-16/1]
FBSSZAJ1204-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,​10]-U[8-20/1]
FBSSZAJ1210-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,​10]-U[8-20/1]
FBSSZAJ1405-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,​10]-U[8-20/1]
FBSSZAJ1505-[150-1200/1]-F[5-30/1]-P[4-10/1]-S[5-48/1]-V[10,​12]-U[10-24/1]
FBSSZAJ1510-[200-1200/1]-F[5-30/1]-P[4-10/1]-S[5-48/1]-V[10,​12]-U[10-24/1]
Part NumberVolume DiscountDays to Ship RoHSScrew Shaft O.D.
(φ)
Lead
(mm)
Axial Play Nut Structure Recirculating Method Number of Circuits
(Rows X Turns)
Screw Total Length L
(mm)
Basic Load Rating, Dynamic Rating
(N)
Basic Load Rating, Static Rating
(N)
Shaft End Shape on Support Side Fixed Side Shaft End Shape Shaft End Length F
(mm)
Shaft Dia. P
(φ)
Screw Shaft Surface Treatment C
(mm)
E
(mm)
G
(mm)
H
(mm)
J
(mm)
JC
(mm)
K
(mm)
KC
(mm)
N
(mm)
Q
(mm)
R
(mm)
S
(mm)
SC
(mm)
U
(mm)
V
(mm)
W
(mm)
X
(mm)
Y
(mm)
Z
(mm)

10 Days or more

10286[0.10 or Less] 0.10 or LessSingleTube Type2×2.5200 ~ 20001210042300H (Double Stepped End Machining)P (Double Stepped, 2 Set Screw Flats)5 ~ 544 ~ 18Phosphate Coating--5 ~ 60------10 ~ 203 ~ 185 ~ 805 ~ 5315 ~ 4015 ~ 20--5 ~ 20-

10 Days or more

103210[0.2 or Less] 0.20 or LessSingleTube Type2×2.5300 ~ 20003280086700H (Double Stepped End Machining)P (Double Stepped, 2 Set Screw Flats)5 ~ 694 ~ 23Phosphate Coating--5 ~ 75------10 ~ 253 ~ 235 ~ 1005 ~ 6820 ~ 5020 ~ 25--5 ~ 20-

10 Days or more

103232[0.2 or Less] 0.15 or LessSingleTube Type2×1.5300 ~ 20001460038900H (Double Stepped End Machining)P (Double Stepped, 2 Set Screw Flats)5 ~ 694 ~ 23Phosphate Coating--5 ~ 75------10 ~ 253 ~ 235 ~ 1005 ~ 6820 ~ 5020 ~ 25--5 ~ 20-

10 Days or more

101020.05 or LessSingleTube Type1×2.5150 ~ 58517003000H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 134 ~ 6Phosphate Coating--5 ~ 18------63 ~ 45 ~ 32-8 ~ 168-5 ~ 115 ~ 185 ~ 8

10 Days or more

101040.05 or LessSingleTube Type1×2.5150 ~ 60023004800H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 134 ~ 6Phosphate Coating--5 ~ 18------63 ~ 45 ~ 32-8 ~ 168-5 ~ 115 ~ 185 ~ 8

10 Days or more

1010100.05 or LessSingleTube Type1×1.5150 ~ 58518503200H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 134 ~ 6Phosphate Coating--5 ~ 18------63 ~ 45 ~ 32-8 ~ 168-5 ~ 115 ~ 185 ~ 8

10 Days or more

101240.05 or LessSingleTube Type1×2.5150 ~ 80026005800H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 244 ~ 8Phosphate Coating--5 ~ 24------6 ~ 83 ~ 65 ~ 40-8 ~ 208 ~ 10-5 ~ 205 ~ 205 ~ 8

10 Days or more

101210[0.10 or Less] 0.10 or LessSingleTube Type1×1.5150 ~ 80028504950H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 244 ~ 8Phosphate Coating--5 ~ 24------6 ~ 83 ~ 65 ~ 40-8 ~ 208 ~ 10-5 ~ 205 ~ 205 ~ 8

10 Days or more

10145[0.10 or Less] 0.10 or LessSingleTube Type1×2.5150 ~ 80044007300H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 244 ~ 8Phosphate Coating--5 ~ 30------6 ~ 103 ~ 85 ~ 40-8 ~ 208 ~ 10-5 ~ 205 ~ 205 ~ 8

16 Days or more

10155[0.10 or Less] 0.10 or LessSingleTube Type1×2.5150 ~ 1200510010500H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 304 ~ 10Phosphate Coating--5 ~ 36------8 ~ 123 ~ 105 ~ 48-10 ~ 2410 ~ 12-5 ~ 205 ~ 205 ~ 8

16 Days or more

101510[0.10 or Less] 0.10 or LessSingleTube Type1×2.5200 ~ 1200510010500H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 304 ~ 10Phosphate Coating--5 ~ 36------8 ~ 123 ~ 105 ~ 48-10 ~ 2410 ~ 12-5 ~ 205 ~ 205 ~ 8

10 Days or more

101520[0.10 or Less] 0.10 or LessSingleTube Type2×1.5200 ~ 1200580013300H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 304 ~ 10Phosphate Coating--5 ~ 36------8 ~ 123 ~ 105 ~ 48-10 ~ 2410 ~ 12-5 ~ 205 ~ 205 ~ 8

10 Days or more

10205[0.10 or Less] 0.10 or LessSingleTube Type1×2.5200 ~ 2000620014700H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 394 ~ 13Phosphate Coating--5 ~ 45------8 ~ 153 ~ 135 ~ 60-10 ~ 3010 ~ 15-5 ~ 205 ~ 205 ~ 10

10 Days or more

102010[0.2 or Less] 0.15 or LessSingleTube Type1×2.5250 ~ 20001060022700H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 394 ~ 13Phosphate Coating--5 ~ 45------8 ~ 153 ~ 135 ~ 60-10 ~ 3010 ~ 15-5 ~ 205 ~ 205 ~ 10

10 Days or more

102020[0.10 or Less] 0.10 or LessSingleTube Type1×2.5250 ~ 2000620014700H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 394 ~ 13Phosphate Coating--5 ~ 45------8 ~ 153 ~ 135 ~ 60-10 ~ 3010 ~ 15-5 ~ 205 ~ 205 ~ 10

16 Days or more

10255[0.10 or Less] 0.10 or LessSingleTube Type1×2.5200 ~ 2000660018700H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 544 ~ 18Phosphate Coating--5 ~ 60------10 ~ 203 ~ 185 ~ 80-15 ~ 4015 ~ 20-5 ~ 205 ~ 205 ~ 14

10 Days or more

102510[0.2 or Less] 0.20 or LessSingleTube Type2×2.5300 ~ 20002750076300H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 544 ~ 18Phosphate Coating--5 ~ 60------10 ~ 203 ~ 185 ~ 80-15 ~ 4015 ~ 20-5 ~ 205 ~ 205 ~ 14

10 Days or more

102525[0.2 or Less] 0.12 or LessSingleTube Type1×2.5300 ~ 2000930022700H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 544 ~ 18Phosphate Coating--5 ~ 60------10 ~ 205 ~ 185 ~ 80-15 ~ 4015 ~ 20-5 ~ 205 ~ 205 ~ 14

10 Days or more

10286[0.10 or Less] 0.10 or LessSingleTube Type2×2.5200 ~ 20001210042300H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 544 ~ 18Phosphate Coating--5 ~ 60------10 ~ 203 ~ 185 ~ 80-15 ~ 4015 ~ 20-5 ~ 205 ~ 205 ~ 14

16 Days or more

103210[0.2 or Less] 0.20 or LessSingleTube Type2×2.5300 ~ 20003280086700H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 694 ~ 23Phosphate Coating--5 ~ 75------10 ~ 253 ~ 235 ~ 100-20 ~ 5020 ~ 25-5 ~ 205 ~ 205 ~ 20

10 Days or more

103232[0.2 or Less] 0.15 or LessSingleTube Type2×1.5300 ~ 20001460038900H (Double Stepped End Machining)R (Double Stepped, Square Chamfering)5 ~ 694 ~ 23Phosphate Coating--5 ~ 75------10 ~ 253 ~ 235 ~ 100-20 ~ 5020 ~ 25-5 ~ 205 ~ 205 ~ 20

10 Days or more

101240.05 or LessSingleTube Type1×2.5150 ~ 80026005800H (Double Stepped End Machining)S (Double Stepped, Tapped Hole, Square End)5 ~ 244 ~ 8Phosphate Coating-4 ~ 85 ~ 24------6 ~ 83 ~ 65 ~ 40-8 ~ 208 ~ 10-5 ~ 205 ~ 205 ~ 8

10 Days or more

101210[0.10 or Less] 0.10 or LessSingleTube Type1×1.5150 ~ 80028504950H (Double Stepped End Machining)S (Double Stepped, Tapped Hole, Square End)5 ~ 244 ~ 8Phosphate Coating-4 ~ 85 ~ 24------6 ~ 83 ~ 65 ~ 40-8 ~ 208 ~ 10-5 ~ 205 ~ 205 ~ 8

10 Days or more

10145[0.10 or Less] 0.10 or LessSingleTube Type1×2.5150 ~ 80044007300H (Double Stepped End Machining)S (Double Stepped, Tapped Hole, Square End)5 ~ 244 ~ 8Phosphate Coating-4 ~ 85 ~ 30------6 ~ 103 ~ 85 ~ 40-8 ~ 208 ~ 10-5 ~ 205 ~ 205 ~ 8

16 Days or more

10155[0.10 or Less] 0.10 or LessSingleTube Type1×2.5150 ~ 1200510010500H (Double Stepped End Machining)S (Double Stepped, Tapped Hole, Square End)5 ~ 304 ~ 10Phosphate Coating-4 ~ 105 ~ 36------8 ~ 123 ~ 105 ~ 48-10 ~ 2410 ~ 12-5 ~ 205 ~ 205 ~ 8

16 Days or more

101510[0.10 or Less] 0.10 or LessSingleTube Type1×2.5200 ~ 1200510010500H (Double Stepped End Machining)S (Double Stepped, Tapped Hole, Square End)5 ~ 304 ~ 10Phosphate Coating-4 ~ 105 ~ 36------8 ~ 123 ~ 105 ~ 48-10 ~ 2410 ~ 12-5 ~ 205 ~ 205 ~ 8

10 Days or more

101520[0.10 or Less] 0.10 or LessSingleTube Type2×1.5200 ~ 1200580013300H (Double Stepped End Machining)S (Double Stepped, Tapped Hole, Square End)5 ~ 304 ~ 10Phosphate Coating-4 ~ 105 ~ 36------8 ~ 123 ~ 105 ~ 48-10 ~ 2410 ~ 12-5 ~ 205 ~ 205 ~ 8

10 Days or more

10205[0.10 or Less] 0.10 or LessSingleTube Type1×2.5200 ~ 2000620014700H (Double Stepped End Machining)S (Double Stepped, Tapped Hole, Square End)5 ~ 394 ~ 13Phosphate Coating-4 ~ 105 ~ 45------8 ~ 153 ~ 135 ~ 60-10 ~ 3010 ~ 15-5 ~ 205 ~ 205 ~ 10

10 Days or more

102010[0.2 or Less] 0.15 or LessSingleTube Type1×2.5250 ~ 20001060022700H (Double Stepped End Machining)S (Double Stepped, Tapped Hole, Square End)5 ~ 394 ~ 13Phosphate Coating-4 ~ 105 ~ 45------8 ~ 153 ~ 135 ~ 60-10 ~ 3010 ~ 15-5 ~ 205 ~ 205 ~ 10

10 Days or more

102020[0.10 or Less] 0.10 or LessSingleTube Type1×2.5250 ~ 2000620014700H (Double Stepped End Machining)S (Double Stepped, Tapped Hole, Square End)5 ~ 394 ~ 13Phosphate Coating-4 ~ 105 ~ 45------8 ~ 153 ~ 135 ~ 60-10 ~ 3010 ~ 15-5 ~ 205 ~ 205 ~ 10

16 Days or more

10255[0.10 or Less] 0.10 or LessSingleTube Type1×2.5200 ~ 2000660018700H (Double Stepped End Machining)S (Double Stepped, Tapped Hole, Square End)5 ~ 544 ~ 18Phosphate Coating-4 ~ 105 ~ 60------10 ~ 203 ~ 185 ~ 80-15 ~ 4015 ~ 20-5 ~ 205 ~ 205 ~ 14

10 Days or more

102510[0.2 or Less] 0.20 or LessSingleTube Type2×2.5300 ~ 20002750076300H (Double Stepped End Machining)S (Double Stepped, Tapped Hole, Square End)5 ~ 544 ~ 18Phosphate Coating-4 ~ 105 ~ 60------10 ~ 203 ~ 185 ~ 80-15 ~ 4015 ~ 20-5 ~ 205 ~ 205 ~ 14

10 Days or more

102525[0.2 or Less] 0.12 or LessSingleTube Type1×2.5300 ~ 2000930022700H (Double Stepped End Machining)S (Double Stepped, Tapped Hole, Square End)5 ~ 544 ~ 18Phosphate Coating-4 ~ 105 ~ 60------10 ~ 205 ~ 145 ~ 80-15 ~ 4015 ~ 20-5 ~ 205 ~ 205 ~ 14

10 Days or more

10286[0.10 or Less] 0.10 or LessSingleTube Type2×2.5200 ~ 20001210042300H (Double Stepped End Machining)S (Double Stepped, Tapped Hole, Square End)5 ~ 544 ~ 18Phosphate Coating-4 ~ 105 ~ 60------10 ~ 203 ~ 185 ~ 80-15 ~ 4015 ~ 20-5 ~ 205 ~ 205 ~ 14

16 Days or more

103210[0.2 or Less] 0.20 or LessSingleTube Type2×2.5300 ~ 20003280086700H (Double Stepped End Machining)S (Double Stepped, Tapped Hole, Square End)5 ~ 694 ~ 23Phosphate Coating-4 ~ 105 ~ 75------10 ~ 253 ~ 235 ~ 100-20 ~ 5020 ~ 25-5 ~ 205 ~ 205 ~ 20

10 Days or more

103232[0.2 or Less] 0.15 or LessSingleTube Type2×1.5300 ~ 20001460038900H (Double Stepped End Machining)S (Double Stepped, Tapped Hole, Square End)5 ~ 694 ~ 23Phosphate Coating-4 ~ 105 ~ 75------10 ~ 253 ~ 235 ~ 100-20 ~ 5020 ~ 25-5 ~ 205 ~ 205 ~ 20

10 Days or more

10820.05 or LessSingleTube Type1×3.5100 ~ 40018003200A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

10 Days or more

101040.05 or LessSingleTube Type1×2.5150 ~ 60023004800A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

10 Days or more

101240.05 or LessSingleTube Type1×2.5150 ~ 80026005800A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

10 Days or more

101210[0.10 or Less] 0.10 or LessSingleTube Type1×1.5150 ~ 80028504950A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

10 Days or more

10145[0.10 or Less] 0.10 or LessSingleTube Type1×2.5150 ~ 80044007300A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

16 Days or more

10155[0.10 or Less] 0.10 or LessSingleTube Type1×2.5150 ~ 1200510010500A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

16 Days or more

101510[0.10 or Less] 0.10 or LessSingleTube Type1×2.5200 ~ 1200510010500A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

10 Days or more

101520[0.10 or Less] 0.10 or LessSingleTube Type2×1.5200 ~ 1200580013300A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

10 Days or more

10205[0.10 or Less] 0.10 or LessSingleTube Type1×2.5200 ~ 2000620014700A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

10 Days or more

102010[0.2 or Less] 0.15 or LessSingleTube Type1×2.5250 ~ 20001060022700A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

10 Days or more

102020[0.10 or Less] 0.10 or LessSingleTube Type1×2.5250 ~ 2000620014700A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

16 Days or more

10255[0.10 or Less] 0.10 or LessSingleTube Type1×2.5200 ~ 2000660018700A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

10 Days or more

102510[0.2 or Less] 0.20 or LessSingleTube Type2×2.5300 ~ 20002750076300A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

10 Days or more

102525[0.2 or Less] 0.12 or LessSingleTube Type1×2.5300 ~ 2000930022700A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

10 Days or more

10286[0.10 or Less] 0.10 or LessSingleTube Type2×2.5200 ~ 20001210042300A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

16 Days or more

103210[0.2 or Less] 0.20 or LessSingleTube Type2×2.5300 ~ 20003280086700A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

10 Days or more

103232[0.2 or Less] 0.15 or LessSingleTube Type2×1.5300 ~ 20001460038900A (No Shaft End Machining)A (No Shaft End Machining)--None-------------------

10 Days or more

10820.05 or LessSingleTube Type1×3.5100 ~ 40018003200A (No Shaft End Machining)J (Double Stepped End Machining)5 ~ 124None-----------5 ~ 24-6 ~ 126----

10 Days or more

101040.05 or LessSingleTube Type1×2.5150 ~ 60023004800A (No Shaft End Machining)J (Double Stepped End Machining)5 ~ 134 ~ 6None-----------5 ~ 32-8 ~ 168----

10 Days or more

101240.05 or LessSingleTube Type1×2.5150 ~ 80026005800A (No Shaft End Machining)J (Double Stepped End Machining)5 ~ 244 ~ 8None-----------5 ~ 40-8 ~ 208 ~ 10----

10 Days or more

101210[0.10 or Less] 0.10 or LessSingleTube Type1×1.5150 ~ 80028504950A (No Shaft End Machining)J (Double Stepped End Machining)5 ~ 244 ~ 8None-----------5 ~ 40-8 ~ 208 ~ 10----

10 Days or more

10145[0.10 or Less] 0.10 or LessSingleTube Type1×2.5150 ~ 80044007300A (No Shaft End Machining)J (Double Stepped End Machining)5 ~ 244 ~ 8None-----------5 ~ 40-8 ~ 208 ~ 10----

16 Days or more

10155[0.10 or Less] 0.10 or LessSingleTube Type1×2.5150 ~ 1200510010500A (No Shaft End Machining)J (Double Stepped End Machining)5 ~ 304 ~ 10None-----------5 ~ 48-10 ~ 2410 ~ 12----

16 Days or more

101510[0.10 or Less] 0.10 or LessSingleTube Type1×2.5200 ~ 1200510010500A (No Shaft End Machining)J (Double Stepped End Machining)5 ~ 304 ~ 10None-----------5 ~ 48-10 ~ 2410 ~ 12----

Loading...

More Information

Rolled Ball Screws -Shaft Ends Configurable- -Standard Nuts-:Related Image
[ ! ]For each ball nut dimensions and specifications, refer to each product's page. Shaft Dia. 8 >> Click here, 10 >> Click here, 12 >> Click here, 14 >> Click here, 15 >> Click here, 20 >> Click here, 25 >> Click here, 28 >> Click here, 32 >> Click here
 

Basic Information

Cost Efficient Standard Type Rolled Flange Shape Compact Flange
Accuracy Grade C10 Preload No Preload Nut Type Standard Nuts
Operating Condition Standard Twisting Direction Right Grease Type Standard
Nut Size Standard

よくあるご質問(FAQ)

質問: What is the allowable temperature range of your ballscrews?
回答: The standard allowable temperature range is 0°C to 80°C.
質問: Can I buy the nut or shaft separately?
回答: No, we do not offer the nut or shaft separately. The ball bearings inside the nut are sized to match each shaft to ensure proper clearance ranges.
質問: What grease is used for your Ball Screws?
回答: The standard grease is Alvania Grease S2 made by Showa Shell Sekiyu K.K. It is an EP 2 lithium bearing grease.
質問: What is the recommended lubrication schedule?
回答: As a rule of thumb, 100 km of linear travel is a good starting point for determining a lubrication schedule. The final schedule should be determined by the customer based on their specific appliation details (load, speed, temperature, contamination ,etc) and application experience.
質問: Do you offer food grade grease?
回答: No, we do not offer food grade grease as a standard option for ball screws.
質問: What does the dynamic load rating mean?
回答: The basic dynamic load rating (Ca) is used to calculate the service life of a ball screw in motion with its ball screw nut under an axial load. The basic dynamic load rating Ca means an axial load at which 90% of a group of identical ball screw units independently operating under the same conditions achieve a rated load of 10^6 revs (1 million revolutions) without causing flaking.
質問: Do you offer screws with right and left hand threads?
回答: We do not offer right and left hand threads on the same shaft as standard. For large volumes, it may be a custom option. Please contact engineering with application details.
質問: What is the difference between pitch and lead?
回答: The pitch is the distance between successive crests of the thread of a screw. The lead is the axial distance traveled by a screw in one turn.
質問: How does temperature increase affect the Ball Screw?
回答: An increase in the screw shaft temperature of 1°C expands the shaft by 12μm per meter. For this reason, although the lead of the Ball Screw is machined to a very high degree of precision, the thermal deformation caused by a temperature increase may reduce positioning accuracy.

その他のよくあるご質問(6件)を見る Close

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

Automation Components Group
Tel:+52-442-672-7661
Mon. - Fri. 8 a.m. - 6 p.m. Sat. 8 a.m. - 12 p.m