• Debido al Tifón (Hagibis) que azotó Japón esta semana (12 de Oct), algunos productos de importación se ha visto afectados. Gracias por su comprensión.
    Due to the Typhoon (Hagibis) in Japan last week (12 Oct), some imported products may be delayed. Thank you for your understanding.

Locating Pin Holders for Jigs- Threaded (Part Numbers)

Locating Pin Holders for Jigs- Threaded

Can be used in combination with cylinder when a workpiece is hard to extract.

  • METRIC

PDFP.2019-1679

Unit examples related to this product
Locating Pin Holders for Jigs- Threaded:Related Image
Locating Pin Holders for Jigs- Threaded:Related Image
・Materials
■Holder
Type[ M ] Material[ H ]Hardness
ThreadedTapped
YGIDYGIDB1045 Carbon SteelTreated Hardness: 40~45HRC
* Direct-mounting at the tip of the cylinder is possible.
■Integrated
Type[ M ] Material[ H ]Hardness
ThreadedTapped
YGIDPYGIDPB1045 Carbon SteelTreated Hardness: 40~45HRC
* Direct-mounting at the tip of the cylinder is possible.

Specifications

Part Number-P-B-L-A-E-M
TypeTip ShapeD
YGIDPB20-P12.8-B30-L100-A30-M8
MPitch
ThreadedTapped
61.0-
81.25
101.51.25
14-1.5
18-1.5
PH71*M1 Tapped (Set Screw)
8+0.015
 0
1824M5
10+0.018
 0
2026M6
122432
162432
[ ! ]P dimension H7 tolerance is up to ℓ1.
Part NumberP(H7)L
1mm Increment
F
1mm Increment
M
TypeDg6ThreadedTapped
Holder (Threaded)
(Tapped)
YGID
YGIDB
16-0.006
-0.017
870~2005~256810810
20-0.007
-0.020
810128101014
25101216101418
301216
[ ! ]When L≤Mx4, tapped hole goes through. [ ! ]W>S+N/2+2 [ ! ]S>N/2+2 [ ! ]When L≤Mx4, tapped hole goes through.
Part Number P
0.1mm Increment
B
1mm Increment
L
1mm Increment
A E (Shape A) 1mm Increment M R
Type Tip Shape Dg6 Threaded Tapped
Integrated (Threaded)
(Tapped)
YGIDP
YGIDPB
A

B
12 -0.006
-0.017
6.0~11.0 5~35
(B≤Px4)
60~150 30
60
90
120
1~10 6 8 8 3
16 6.0~15.0 6 8 10 8 10
20 -0.007
-0.020
6.0~16.0 8 10 10 14
25 16.0~24.0 10 14 18 4
30
[ ! ]Tapped Type Mx3≤L

Alterations

Locating Pin Holders for Jigs- Threaded:Related Image

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
YGID16-P8-L[70-200/1]-F[5-25/1]-M[6,​8,​10]
YGID20-P[8,​10,​12]-L[70-200/1]-F[5-25/1]-M[8,​10]
YGID25-P[10,​12,​16]-L[70-200/1]-F[5-25/1]-M[8,​10]
YGID30-P[12,​16]-L[70-200/1]-F[5-25/1]-M[8,​10]
YGIDB16-P8-L[70-200/1]-F[5-25/1]-M[8,​10]
YGIDB20-P[8,​10,​12]-L[70-200/1]-F[5-25/1]-M[10,​14]
YGIDB25-P[10,​12,​16]-L[70-200/1]-F[5-25/1]-M[10,​14,​18]
YGIDB30-P[12,​16]-L[70-200/1]-F[5-25/1]-M[10,​14,​18]
YGIDPA12-P[6-11/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-E[1-10/1]-M[6,​8]
YGIDPA16-P[6-15/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-E[1-10/1]-M[6,​8,​10]
YGIDPA20-P[6-16/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-E[1-10/1]-M[8,​10]
YGIDPA25-P[16-24/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-E[1-10/1]-M[8,​10]
YGIDPA30-P[16-24/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-E[1-10/1]-M[8,​10]
YGIDPB12-P[6-11/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-M[6,​8]
YGIDPB16-P[6-15/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-M[6,​8,​10]
YGIDPB20-P[6-16/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-M[8,​10]
YGIDPB25-P[16-24/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-M[8,​10]
YGIDPB30-P[16-24/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-M[8,​10]
YGIDPBA12-P[6-16/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-E[1-10/1]-M8
YGIDPBA16-P[6-16/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-E[1-10/1]-M[8,​10]
YGIDPBA20-P[6-16/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-E[1-10/1]-M[10,​14]
YGIDPBA25-P[16-24/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-E[1-10/1]-M[10,​14,​18]
YGIDPBA30-P[16-24/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-E[1-10/1]-M[10,​14,​18]
YGIDPBB12-P[6-16/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-M8
YGIDPBB16-P[6-16/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-M[8,​10]
YGIDPBB20-P[6-16/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-M[10,​14]
YGIDPBB25-P[16-24/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-M[10,​14,​18]
YGIDPBB30-P[16-24/0.1]-B[5-35/1]-L[60-150/1]-A[30,​60,​90,​120]-M[10,​14,​18]
Part NumberVolume DiscountDays to Ship RoHSHead Tip Shape Shank Style Concentricity (Head-Shank) Head Dia. Tolerance
(mm)
A
(°)
F
(mm)
L
(mm)
M
(mm)
P Positioning Part Length B
(mm)
Taper Length E
(mm)

8 Days or more

10-Male thread---5 ~ 2570 ~ 2006 ~ 108--

8 Days or more

10-Male thread---5 ~ 2570 ~ 2008 ~ 108 ~ 12--

8 Days or more

10-Male thread---5 ~ 2570 ~ 2008 ~ 1010 ~ 16--

8 Days or more

10-Male thread---5 ~ 2570 ~ 2008 ~ 1012 ~ 16--

8 Days or more

10-Male thread---5 ~ 2570 ~ 2008 ~ 108--

8 Days or more

10-Male thread---5 ~ 2570 ~ 20010 ~ 148 ~ 12--

8 Days or more

10-Male thread---5 ~ 2570 ~ 20010 ~ 1810 ~ 16--

8 Days or more

10-Male thread---5 ~ 2570 ~ 20010 ~ 1812 ~ 16--

8 Days or more

10Taper (Shape A)Male threadStandard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 1506 ~ 86 ~ 115 ~ 351 ~ 10

8 Days or more

10Taper (Shape A)Male threadStandard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 1506 ~ 106 ~ 155 ~ 351 ~ 10

8 Days or more

10Taper (Shape A)Male threadStandard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 1508 ~ 106 ~ 165 ~ 351 ~ 10

8 Days or more

10Taper (Shape A)Male threadStandard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 1508 ~ 1016 ~ 245 ~ 351 ~ 10

8 Days or more

10Taper (Shape A)Male threadStandard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 1508 ~ 1016 ~ 245 ~ 351 ~ 10

8 Days or more

10Tip R (B shape)Male threadStandard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 1506 ~ 86 ~ 115 ~ 35-

8 Days or more

10Tip R (B shape)Male threadStandard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 1506 ~ 106 ~ 155 ~ 35-

8 Days or more

10Tip R (B shape)Male threadStandard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 1508 ~ 106 ~ 165 ~ 35-

8 Days or more

10Tip R (B shape)Male threadStandard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 1508 ~ 1016 ~ 245 ~ 35-

8 Days or more

10Tip R (B shape)Male threadStandard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 1508 ~ 1016 ~ 245 ~ 35-

8 Days or more

10Taper (Shape A)Bolted (Internal Thread)Standard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 15086 ~ 165 ~ 351 ~ 10

8 Days or more

10Taper (Shape A)Bolted (Internal Thread)Standard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 1508 ~ 106 ~ 165 ~ 351 ~ 10

8 Days or more

10Taper (Shape A)Bolted (Internal Thread)Standard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 15010 ~ 146 ~ 165 ~ 351 ~ 10

8 Days or more

10Taper (Shape A)Bolted (Internal Thread)Standard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 15010 ~ 1816 ~ 245 ~ 351 ~ 10

8 Days or more

10Taper (Shape A)Bolted (Internal Thread)Standard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 15010 ~ 1816 ~ 245 ~ 351 ~ 10

8 Days or more

10Tip R (B shape)Bolted (Internal Thread)Standard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 15086 ~ 165 ~ 35-

8 Days or more

10Tip R (B shape)Bolted (Internal Thread)Standard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 1508 ~ 106 ~ 165 ~ 35-

8 Days or more

10Tip R (B shape)Bolted (Internal Thread)Standard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 15010 ~ 146 ~ 165 ~ 35-

8 Days or more

10Tip R (B shape)Bolted (Internal Thread)Standard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 15010 ~ 1816 ~ 245 ~ 35-

8 Days or more

10Tip R (B shape)Bolted (Internal Thread)Standard Grade φ0.03Standard Grade 0/-0.0530 ~ 120-60 ~ 15010 ~ 1816 ~ 245 ~ 35-

Loading...

  1. 1

More Information

Reference: sin15°≈0.259 sin30°=0.5
sin45°≈0.707 sin60°≈0.866
tan15°≈0.267 tan30°=0.577
tan45°=1 tan60°≈1.732
 

Basic Information

Head Shape Round Surface Treatment Plain

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

Automation Components Group
Tel:+52-442-672-7661
Mon. - Fri. 8 a.m. - 6 p.m. Sat. 8 a.m. - 12 p.m