• Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 p.m. 9/22/2018 to 4:00 p.m. (CDT) 9/23/2018. We apologize for the inconvenience.

X/XY/Z-Axis Stages - Selectable (Part Numbers)

X/XY/Z-Axis Stages - Selectable

Selectable kinds of Feed Position, Feed/Clamping Methods and Grease.

X/XY/Z-Axis Stages - Selectable:

Specifications

Part Number-①Feed Position-②Feeding Method-③Clamp Type-④Grease
FSXYR40-C-F-S-R
Part NumberStage Used
TypeAxisGuide
FSXRXSG(Click here)
CXPG(Click here)
XYRXYSG(Click here)
ZRZSG(Click here)
* Refer to the stage with the same size as the table.
Guide Type R: Linear Ball Slide
C: Cross Roller Slide
Slide Stage①Feed Position②Feeding Method③Clamp Type④Grease
AxisTypeSizeCenter / SideMicrometer Head (Stroke: mm)Feed Screw
(Pitch / Stroke: mm)
SelectionSelection
XFSXR
(Linear Ball)
25(Center): A AR
: AZ AZR
(Side): C CR
: CZ CZR  
N (Standard ±3.2)F (Hex Socket 0.5/±3.2)
B (Feed Screw 0.5/±3.2)
S (Standard)G (Standard)
R (Clean Env. Compatible) *2
40N (Standard ±6.5)
M (Coarse Fine Feed ±6.5)
F (Hex Socket 0.5/±6.5)
B (Feed Screw 0.5/±6.5)
J (Feed Screw 1.0/±6.5)
S (Standard)
H (Disc)
P (Opposed) Applicable only when C and CR, and the feed type is N or F.
50
60
70
80N (Standard ±12.5)
M (Coarse Fine Feed ±6.5)
D (Digital Micrometer ±12.5)
*1Only applicable to feed position A ,AR and C.
S (Standard)
H (Disc)
FSXC
(Cross Roller)
25(Center): A AR
: AZ AZR
(Side): C CR
: CZ CZR  
N (Standard ±3.2)F (Hex Socket 0.5/±3.2)
B (Feed Screw 0.5/±3.2)
S (Standard)G (Standard)
R (Clean Env. Compatible) *2
40N (Standard ±6.5)
M (Coarse Fine Feed ±6.5)
F (Hex Socket 0.5/±6.5)
B (Feed Screw 0.5/±6.5)
J (Feed Screw 1.0/±6.5)
S (Standard)
H (Disc)
P (Opposed) Applicable only when C and CR, and the feed type is N or F.
60
80N (Standard ±12.5)
M (Coarse Fine Feed ±6.5)
D (Digital Micrometer ±12.5)
*1Only applicable to feed position A ,AR and C.
S (Standard)
XYFSXYR
(Linear Ball)
25(Center): A AR
(Side): C CR
N (Standard ±3.2)F (Hex Socket 0.5/±3.2)
B (Feed Screw 0.5/±3.2)
S (Standard)G (Standard)
R (Clean Env. Compatible) *2
40N (Standard ±6.5)
M (Coarse Fine Feed ±6.5)
F (Hex Socket 0.5/±6.5)
B (Feed Screw 0.5/±6.5)
J (Feed Screw 1.0/±6.5)
S (Standard)
H (Disc)
P (Opposed) Applicable only when C and CR, and the feed type is N or F.
50
60
70
80N (Standard ±12.5)
M (Coarse Fine Feed ±6.5)
D (Digital Micrometer ±12.5)
*1Only applicable to feed position A ,AR and C.
S (Standard)
H (Disc) Only applicable to C, CR.
ZFSZR
(Linear Ball)
25(Center): AZ AZR
(Side): C CR
: CZ CZR
Feeding direction of C, CR is upward; that of the others is downwards.
N (Standard ±3.2)F (Hex Socket 0.5/±3.2)
B (Feed Screw 0.5/±3.2)
S (Standard)G (Standard)
R (Clean Env. Compatible) *2
40N (Standard ±6.5)
M (Coarse / Fine Feeds ±6.5)Not applicable to C, CR.
F (Hex Socket 0.5/±6.5)
B (Feed Screw 0.5/±6.5)
J (Feed Screw 1.0/±6.5)
S (Standard)H (Disc)
P (Opposed) Applicable only when C and CR, and the feed type is N and F.
50
60
70
80N (Standard ±12.5)
M (Coarse/Fine Feeds ±6.5) Not applicable to C, CR.
S (Standard)
H (Disc)
*1 Only clamp position will be changed for Digital Micrometer A and AR. *2 When feed type M (coarse / fine feeds) or D (digital micrometer) is selected, grease R (clean env. compatible) is not applicable.
[ ! ]Knob Cover HDCVR13 (Sold Separately): Ø13 mm knob diameter can be increased by installing the cover. >> Click here
[ ! ]Extension Cover HDEXT13 (Sold Separately): Ø13 mm head or feed screw knobs can be extended by installing the cover. >> Click here

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
FSXR70-C-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXR70-CR-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXR70-CZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR70-CZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR80-A-[B,​D,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR80-AR-[B,​D,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR80-AZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR80-AZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR80-C-[B,​D,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR80-CR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR80-CZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR80-CZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXYR25-A-[B,​F,​N]-S-[G,​R]
FSXYR25-AR-[B,​F,​N]-S-[G,​R]
FSXYR25-C-[B,​F,​N]-S-[G,​R]
FSXYR25-CR-[B,​F,​N]-S-[G,​R]
FSXYR40-A-[B,​F,​J,​M,​N]-S-[G,​R]
FSXYR40-AR-[B,​F,​J,​M,​N]-S-[G,​R]
FSXYR40-C-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXYR40-CR-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXYR50-A-[B,​F,​J,​M,​N]-S-[G,​R]
FSXYR50-AR-[B,​F,​J,​M,​N]-S-[G,​R]
FSXYR50-C-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXYR50-CR-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXYR60-A-[B,​F,​J,​M,​N]-S-[G,​R]
FSXYR60-AR-[B,​F,​J,​M,​N]-S-[G,​R]
FSXYR60-C-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXYR60-CR-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXYR70-A-[B,​F,​J,​M,​N]-S-[G,​R]
FSXYR70-AR-[B,​F,​J,​M,​N]-S-[G,​R]
FSXYR70-C-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXYR70-CR-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXYR80-A-[B,​D,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXYR80-AR-[B,​D,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXYR80-C-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXYR80-CR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSZR25-AZ-[B,​F,​N]-S-[G,​R]
FSZR25-AZR-[B,​F,​N]-S-[G,​R]
FSZR25-C-[B,​F,​N]-S-[G,​R]
FSZR25-CR-[B,​F,​N]-S-[G,​R]
FSZR25-CZ-[B,​F,​N]-S-[G,​R]
FSZR25-CZR-[B,​F,​N]-S-[G,​R]
FSZR40-AZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSZR40-AZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSZR40-C-[B,​F,​J,​N]-[H,​P,​S]-[G,​R]
FSZR40-CR-[B,​F,​J,​N]-[H,​P,​S]-[G,​R]
FSZR40-CZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSZR40-CZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSZR50-AZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSZR50-AZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSZR50-C-[B,​F,​J,​N]-[H,​P,​S]-[G,​R]
FSZR50-CR-[B,​F,​J,​N]-[H,​P,​S]-[G,​R]
FSZR50-CZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSZR50-CZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSZR60-AZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSZR60-AZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSZR60-C-[B,​F,​J,​N]-[H,​P,​S]-[G,​R]
FSZR60-CR-[B,​F,​J,​N]-[H,​P,​S]-[G,​R]
FSZR60-CZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSZR60-CZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
Part NumberVolume DiscountDays to Ship RoHSTravel Distance (X Distance) (Selection Range)
(mm)
Travel Distance (Y Distance) (Selection Range)
(mm)
Load Capacity (Range)
(N)
Table Size (Length) L (Range)
(mm)
Table Size (Width) W (Range)
(mm)
Table Size (Thickness) H (Range)
(mm)
Guiding Mechanism Table Material Table Surface Treatment Table Size (Length) L
(mm)
Table Size (Width) W
(mm)
Allowable Load
(N)
Travel Distance (X Distance)
(mm)
Travel Distance (Y Distance)
(mm)
Table Size (Thickness) H
(mm)
Travel Distance (Z Distance)
(mm)
Table Parallelism
(µm)
Moment Rigidity (Pitching)
("/N•cm)
Moment Rigidity (Yawing)
("/N•cm)
Moment Rigidity (Rolling)
("/N•cm)
Feed Knob Position Reversed Grease Selection Clamp Method Selection Feeding Method Selection

10 Days or more

6~ ±10mm-100.1~61~9061~9015.1~20Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating7070225.4±6.5-18-150.060.050.03SideStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm-100.1~61~9061~9015.1~20Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating7070225.4±6.5-18-150.060.050.03SideRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm-100.1~61~9061~9015.1~20Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating7070225.4±6.5-18-150.060.050.03SideTop and BottomG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm-100.1~61~9061~9015.1~20Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating7070225.4±6.5-18-150.060.050.03SideRelative PositionG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6±10~30mm-100.1~61~9061~9015.1~20Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating8080264.6±12.5-20-200.040.040.02CenterStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]

10 Days or more

6±10~30mm-100.1~61~9061~9015.1~20Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating8080264.6±12.5-20-200.040.040.02CenterRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]

10 Days or more

6±10~30mm-100.1~61~9061~9015.1~20Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating8080264.6±12.5-20-200.040.040.02CenterTop and BottomG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6±10~30mm-100.1~61~9061~9015.1~20Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating8080264.6±12.5-20-200.040.040.02CenterRelative PositionG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6±10~30mm-100.1~61~9061~9015.1~20Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating8080264.6±12.5-20-200.040.040.02SideStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]

10 Days or more

6±10~30mm-100.1~61~9061~9015.1~20Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating8080264.6±12.5-20-200.040.040.02SideRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6±10~30mm-100.1~61~9061~9015.1~20Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating8080264.6±12.5-20-200.040.040.02SideTop and BottomG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6±10~30mm-100.1~61~9061~9015.1~20Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating8080264.6±12.5-20-200.040.040.02SideRelative PositionG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm30.1~50~25~2520.1~25Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating252538.2±3.2±3.224-3032.23.00CenterStandardG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm30.1~50~25~2520.1~25Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating252538.2±3.2±3.224-3032.23.00CenterRight and LeftG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm30.1~50~25~2520.1~25Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating252538.2±3.2±3.224-3032.23.00SideStandardG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm30.1~50~25~2520.1~25Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating252538.2±3.2±3.224-3032.23.00SideRight and LeftG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm50.1~10026~4026~4030.1~35Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating404095.2±6.5±6.532-300.630.70.63CenterStandardG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm50.1~10026~4026~4030.1~35Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating404095.2±6.5±6.532-300.630.70.63CenterRight and LeftG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm50.1~10026~4026~4030.1~35Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating404095.2±6.5±6.532-300.630.70.63SideStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm50.1~10026~4026~4030.1~35Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating404095.2±6.5±6.532-300.630.70.63SideRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm100.1~41~6041~6030.1~35Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating5050144.2±6.5±6.532-300.240.280.24CenterStandardG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm100.1~41~6041~6030.1~35Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating5050144.2±6.5±6.532-300.240.280.24CenterRight and LeftG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm100.1~41~6041~6030.1~35Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating5050144.2±6.5±6.532-300.240.280.24SideStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm100.1~41~6041~6030.1~35Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating5050144.2±6.5±6.532-300.240.280.24SideRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm100.1~41~6041~6030.1~35Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating6060192.1±6.5±6.532-300.130.160.13CenterStandardG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm100.1~41~6041~6030.1~35Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating6060192.1±6.5±6.532-300.130.160.13CenterRight and LeftG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm100.1~41~6041~6030.1~35Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating6060192.1±6.5±6.532-300.130.160.13SideStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm100.1~41~6041~6030.1~35Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating6060192.1±6.5±6.532-300.130.160.13SideRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm100.1~61~9061~9035.1~40Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating7070219.7±6.5±6.536-300.090.10.09CenterStandardG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm100.1~61~9061~9035.1~40Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating7070219.7±6.5±6.536-300.090.10.09CenterRight and LeftG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm100.1~61~9061~9035.1~40Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating7070219.7±6.5±6.536-300.090.10.09SideStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6~ ±10mm~ ±10mm100.1~61~9061~9035.1~40Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating7070219.7±6.5±6.536-300.090.10.09SideRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6±10~30mm±10~30mm100.1~61~9061~9035.1~40Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating8080255.8±12.5±12.540-400.060.080.06CenterStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]

10 Days or more

6±10~30mm±10~30mm100.1~61~9061~9035.1~40Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating8080255.8±12.5±12.540-400.060.080.06CenterRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]

10 Days or more

6±10~30mm±10~30mm100.1~61~9061~9035.1~40Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating8080255.8±12.5±12.540-400.060.080.06SideStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6±10~30mm±10~30mm100.1~61~9061~9035.1~40Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating8080255.8±12.5±12.540-400.060.080.06SideRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6--5~30~25~25-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating25259.8---±3.2-1.91.11.1CenterTop and BottomG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

10 Days or more

6--5~30~25~25-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating25259.8---±3.2-1.91.11.1CenterRelative PositionG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

10 Days or more

6--5~30~25~25-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating25259.8---±3.2-1.91.11.1SideStandardG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

10 Days or more

6--5~30~25~25-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating25259.8---±3.2-1.91.11.1SideRight and LeftG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

10 Days or more

6--5~30~25~25-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating25259.8---±3.2-1.91.11.1SideTop and BottomG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

10 Days or more

6--5~30~25~25-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating25259.8---±3.2-1.91.11.1SideRelative PositionG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5026~4026~40-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating404049---±6.5-0.420.350.21CenterTop and BottomG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5026~4026~40-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating404049---±6.5-0.420.350.21CenterRelative PositionG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5026~4026~40-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating404049---±6.5-0.420.350.21SideStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5026~4026~40-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating404049---±6.5-0.420.350.21SideRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5026~4026~40-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating404049---±6.5-0.420.350.21SideTop and BottomG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5026~4026~40-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating404049---±6.5-0.420.350.21SideRelative PositionG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5041~6041~60-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating505049---±6.5-0.150.140.09CenterTop and BottomG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5041~6041~60-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating505049---±6.5-0.150.140.09CenterRelative PositionG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5041~6041~60-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating505049---±6.5-0.150.140.09SideStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5041~6041~60-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating505049---±6.5-0.150.140.09SideRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5041~6041~60-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating505049---±6.5-0.150.140.09SideTop and BottomG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5041~6041~60-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating505049---±6.5-0.150.140.09SideRelative PositionG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5041~6041~60-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating606049---±6.5-0.080.080.05CenterTop and BottomG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5041~6041~60-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating606049---±6.5-0.080.080.05CenterRelative PositionG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5041~6041~60-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating606049---±6.5-0.080.080.05SideStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5041~6041~60-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating606049---±6.5-0.080.080.05SideRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5041~6041~60-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating606049---±6.5-0.080.080.05SideTop and BottomG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

10 Days or more

6--30.1~5041~6041~60-Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating606049---±6.5-0.080.080.05SideRelative PositionG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

Loading...

Lead Time

More Information

X/XY/Z-Axis Stages - Selectable:

(XSG>>Click here and XPG>>Click here)

(ZSG>>Click here and ZPG>>Click here)

■Other Information about Stages
Stage Selection Table Click here, Click here
Overview, Technical Information Click here, Click here
 

Basic Information

Through Hole (Table Center Hole) No

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Automation Components Group
Tel:+52-442-672-7661
Mon. - Fri. 8 a.m. - 6 p.m. Sat. 8 a.m. - 12 p.m