Linear Guide Blocks - Heavy Load, Stainless Steel With Resin Retainer, Interchangeable, Light Preload (SSXRZ24-160)

Linear Guide Blocks - Heavy Load, Stainless Steel With Resin Retainer, Interchangeable, Light Preload
  • Volume Discount

With No Mutual Ball Contacts, Resin Retainer provides Low-Noise and Smooth Movements.

  • inCAD Components

[ ! ]For L Dimension Configurable Type, G dimensions differ from those shown in the table below. For details, see >> Click here.
・Materials
[ M ]Material
[ H ]Hardness
TypeBlockRailL Dimension
1 block2 blocks
Stainless Steel
(440C Stainless Steel)
57HRC~
SSXRZSSX2RZSSXRBSSRZLSelectable
SSXRLZSSX2RLZSSRZLFConfigurable
Heat Resistant Temperature: 0~50°C
 

Specifications



[ ! ]For L Dimension Configurable Type, G dimensions differ from those shown in the table below. For details, see >> Click here.
Part NumberLBlock DimensionGuide Rail Dimension
TypeHWL1BCSxℓL2KTGrease FittingH1W1W2Counterbored HoleFG
1 block2 blocksMounting HoleET1d1xd2xh
SSXRZ
SSXRLZ
(Block)
SSXRB
SSX2RZ
SSX2RLZ
(Rail)
SSRZL
S
SRZLF
 
24100~1480
(160)
3456.82626M4x64019.410Ø33612.5159.53.5x6x4.56020
28160~1480
(220)
4265.23232M5x7482212M6xP0.75115.515.520116x9.5x8.56020
33160~1480
(220)
4881.63535M6x9602612M6xP0.75117182312.57x11x96020
[ ! ]L Dimension: Dimensions in ( ) are for 2-Block Type.
 

Materials

[ M ]Material
[ H ]Hardness
TypeBlockRailL Dimension
1 block2 blocks
Stainless Steel
(440C Stainless Steel)
57HRC~
SSXRZSSX2RZSSXRBSSRZLSelectable
SSXRLZSSX2RLZSSRZLFConfigurable
Heat Resistant Temperature: 0~50°C
 
Part Number-L
SSXRZ28-640
■Precautions for Use
[ ! ]Blocks are equipped with retainers (wire) to prevent balls from derailing. For blocks >> Click here
[ ! ]For Interchangeable, Light Preload Type, rails and blocks can be interchanged.
[ ! ]Straight grooves are provided on datum planes. Be sure to match the datum lines when using.
[ ! ]Rails cannot be connected end to end.
[ ! ]Running parallelism is the value measured after the rail is mounted (it is not the value measured before the rails are fastened with screws.).
■Others
· Filled with Lithium soap based grease (Alvania Grease S2 by Showa Shell Sekiyu K.K).
· Grease Fittings: Straight Type for H24 and Angled Type for H28 and H33.
· Grease Fitting is screw-in type, and thus, can be repositioned.
· For Operating Life Calculation >> Click here
 

Alterations

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
SSXRZ24-160
Part NumberVolume DiscountDays to Ship RoHSSet/Separate Item Block Type Rail Type Rail Width W1
(mm)
Unit Height H
(mm)
Number of Blocks Rail Length L
(mm)
Call Out Size Ball Alignment Retainers Rolling Element Basic Load Rating, Dynamic Rating
(N)
Basic Load Rating, Static Rating
(N)
Allowable Static Moment MA
(N•m)
Allowable Static Moment MB
(N•m)
Allowable Static Moment MC
(N•m)
Lubrication Type L Dimension Type

8 Days or more

10Set[Standard] Standard BlockStandard1524116015Medium, Heavy Load Type with Plastic RetainersYesBalls790015600746278Lithium Base Grease (Standard)Standard Type

Loading...

  1. 1

More Information


see >> Click here

Linear Guide Clamps >> Click here
Rail Height Adjusting Blocks >> Click here, Click here
■Stopper Bolts >> Click here
■Block Stopper Plates >> Click here
■Rail Mounting Hole Caps >> Click here
■Rail Push Plates >> Click here
■Linear Locks >> Click here
■Linear Guide Lock Units >> Click here
 

Basic Information

Cost Efficient Standard Material Stainless Steel Preload Light Preload-Interchangeable

よくあるご質問(FAQ)

質問: Are the block's ball bearings retained?
回答: Yes, all ball bearings are retained on Misumi linear guides.

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

Automation Components Group
Tel:+52-442-672-7661
Mon. - Fri. 8 a.m. - 6 p.m. Sat. 8 a.m. - 12 p.m