Hot-Water Tubes

Hot-Water Tubes:Related Image
Part Number
M-NB0425-[5,​10,​20,​100]-[B,​W]
M-NB0640-[5,​10,​20,​100]-[B,​W]
M-NB0860-[5,​10,​20,​100]-[B,​W]
M-NB1075-[5,​10,​20,​100]-[B,​W]
M-NB1290-[5,​10,​20,​100]-[B,​W]
M-SFT0640-[5,​10,​20]-C
M-SFT0860-[5,​10,​20]-C
M-SFT1075-[5,​10,​20]-C
M-SFT1290-[5,​10,​20]-C
M-WE0425-[5,​10,​20]-W
M-WE0640-[5,​10,​20]-W
M-WE0860-[5,​10,​20]-W
M-WE1075-[5,​10,​20]-W
M-WE1290-[5,​10,​20]-W
Part NumberVolume DiscountDays to Ship External dia.
(mm)
Int. dia.
(mm)
Upper limit of temperature Lower limit of temperature Color L (L dimension)
(m)

8 Days or more

42.590-15B (Blue) / W (Milky white)5 ~ 100

8 Days or more

6490-15B (Blue) / W (Milky white)5 ~ 100

8 Days or more

8690-15B (Blue) / W (Milky white)5 ~ 100

8 Days or more

107.590-15B (Blue) / W (Milky white)5 ~ 100

8 Days or more

12990-15B (Blue) / W (Milky white)5 ~ 100

8 Days or more

641200C (Transparent)5 ~ 20

8 Days or more

861200C (Transparent)5 ~ 20

8 Days or more

107.51200C (Transparent)5 ~ 20

8 Days or more

1291200C (Transparent)5 ~ 20

8 Days or more

42.5990W (Milky white)5 ~ 20

8 Days or more

64990W (Milky white)5 ~ 20

8 Days or more

86990W (Milky white)5 ~ 20

8 Days or more

107.5990W (Milky white)5 ~ 20

8 Days or more

129990W (Milky white)5 ~ 20

Loading...

  1. 1

Specifications

Hot-Water Tubes:Related Image
•Dimension Table
Ext. dia.of tubeInt. dia.of tubeMin.
bend radius
Usable PressurePart NumberFull length L
(meter)
Color
C
TypeNo.
42.5140~300
kPa

0~3
kgf/cm2
M-WA04255
10
20
100
B
(Blue)
W
(Milky white)
64180640
86280860
107.5361075
129401290
6430*See the recommended usage pressure table.M-SFT06405
10
20
C
(Transparent)
86480860
107.5601075
129721290
Full length L is in meter increments.

More Information

■Recommended usage pressure table of hot-water tube (M-SFT) kPa{kgf/cm2}
Temperature
Part Number
25°C50°C75°C100°C120°C
M-SFT0640Recommended usage pressure1750 {17.5}1250 {12.5}1000 {10}875 {8.75}650 {6.5}
Burst pressure7000 {70}5000 {50}4000 {40}3500 {35}2600 {26}
M-SFT0860Recommended usage pressure1250 {12.5}875 {8.75}750 {7.5}500 {5}475 {4.75}
Burst pressure5000 {50}3500 {35}3000 {30}2000 {20}1900 {19}
M-SFT1075Recommended usage pressure1250 {12.5}875 {8.75}750 {7.5}500 {5}325 {3.25}
Burst pressure5000 {50}3500 {35}3000 {30}2000 {20}1300 {13}
M-SFT1290Recommended usage pressure1250 {12.5}875 {8.75}750 {7.5}500 {5}300 {3}
Burst pressure5000 {50}3500 {35}3000 {30}2000 {20}1200 {12}
Recommended usage pressure is 1/4 the burst pressure. Be sure to use the tube under the recommended usage pressure.

Example

Hot-Water Tubes:Related Image
●Notes
① Select an appropriate tube in accordance with cooling water temperature.
② Tube can be used for both cooling water and oil. (Water only for M-WE)
③ Cut the tube end squarely (at a right angle) to put it into a quick-fitting mold joint or bolting joint-otherwise the tube may come out unexpectedly or cause water leakage.
④ Use the special insert sleeve together with these tubes to connect to a quick-fitting mold joint.Use without an insert sleeve may cause the tube to fall off unexpectedly or result in water leakage.
⑤ The higher the temperature rises, the lower the burst pressure of hot-water tube (M-SFT) falls. Use the tube in high temperature after making sure of the burst pressure.
⑥ When fitting the tube to bolting joints again, fit it after cutting the part fitted before.
Usage without cutting could cause the tube to fall off unexpectedly or result in water leakage.
 

Basic Information

Clamping structure No

Additional Products in this Category

Tech Support

Die & Mold Division
Tel:+52-442-672-7661
Mon. - Fri. 8 a.m. - 6 p.m. Sat. 8 a.m. - 12 p.m