• Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 a.m. to 6:30 a.m. (CST) 11/18/2018. We apologize for the inconvenience.

Short Ejector Sleeves (Bushings for straight ejector pins)

Short Ejector Sleeves (Bushings for straight ejector pins)

Click this image to zoom it.

Move the mouse over the image to zoom

Part Number

Configured Part Number is shown.

 
Part Number
EPBB-H2.5-[15-50/0.01]-V[1-1.3/0.01]
EPBB-H3-[15-50/0.01]-V[1.31-1.8/0.01]
EPBB-H4-[15-50/0.01]-V[1.91-2.8/0.01]
EPBB-H5-[15-50/0.01]-V[2.91-3.8/0.01]
EPBB-H6-[15-50/0.01]-V[3.91-4.8/0.01]
EPBB-H7-[15-50/0.01]-V[4.91-5.8/0.01]
EPBB-H8-[15-50/0.01]-V[5.81-6.8/0.01]
EPBB-M2.5-[15-50/0.01]-V[1-1.3/0.01]
EPBB-M3-[15-50/0.01]-V[1.31-1.8/0.01]
EPBB-M4-[15-50/0.01]-V[1.91-2.8/0.01]
EPBB-M5-[15-50/0.01]-V[2.91-3.8/0.01]
EPBB-M6-[15-50/0.01]-V[3.91-4.8/0.01]
EPBB-M7-[15-50/0.01]-V[4.91-5.8/0.01]
EPBB-M8-[15-50/0.01]-V[5.81-6.8/0.01]
EPBBH2.5-[15-50/0.01]-V[1-1.3/0.01]
EPBBH3-[15-50/0.01]-V[1.31-1.8/0.01]
EPBBH4-[15-50/0.01]-V[1.91-2.8/0.01]
EPBBH5-[15-50/0.01]-V[2.91-3.8/0.01]
EPBBH6-[15-50/0.01]-V[3.91-4.8/0.01]
EPBBH7-[15-50/0.01]-V[4.91-5.8/0.01]
EPBBH8-[15-50/0.01]-V[5.81-6.8/0.01]
Part NumberVolume DiscountDays to Ship RoHSShaft diameter tolerance D/P (Shaft diameter)
(mm)
V (Hole diameter)
(mm)
Inner dia. tolerance L (L dimension)
(mm)

8 Days

60/-0.0052.51 ~ 1.3+0.01/015 ~ 50

8 Days

60/-0.00531.31 ~ 1.8+0.01/015 ~ 50

8 Days

60/-0.00541.91 ~ 2.8+0.01/015 ~ 50

8 Days

60/-0.00552.91 ~ 3.8+0.01/015 ~ 50

8 Days

60/-0.00563.91 ~ 4.8+0.01/015 ~ 50

8 Days

60/-0.00574.91 ~ 5.8+0.01/015 ~ 50

8 Days

60/-0.00585.81 ~ 6.8+0.01/015 ~ 50

8 Days

6-0.01/-0.022.51 ~ 1.3+0.01/015 ~ 50

8 Days

6-0.01/-0.0231.31 ~ 1.8+0.01/015 ~ 50

8 Days

6-0.01/-0.0241.91 ~ 2.8+0.01/015 ~ 50

8 Days

6-0.01/-0.0252.91 ~ 3.8+0.01/015 ~ 50

8 Days

6-0.01/-0.0263.91 ~ 4.8+0.01/015 ~ 50

8 Days

6-0.01/-0.0274.91 ~ 5.8+0.01/015 ~ 50

8 Days

6-0.01/-0.0285.81 ~ 6.8+0.01/015 ~ 50

8 Days

60/-0.0052.51 ~ 1.3+0.005/015 ~ 50

8 Days

60/-0.00531.31 ~ 1.8+0.005/015 ~ 50

8 Days

60/-0.00541.91 ~ 2.8+0.005/015 ~ 50

8 Days

60/-0.00552.91 ~ 3.8+0.005/015 ~ 50

8 Days

60/-0.00563.91 ~ 4.8+0.005/015 ~ 50

8 Days

60/-0.00574.91 ~ 5.8+0.005/015 ~ 50

8 Days

60/-0.00585.81 ~ 6.8+0.005/015 ~ 50

Loading...

  1. 1

Basic Information

Product composition Single sleeve Material SKH51 Surface treatment No
Head thickness 4mm(T4) Concentricity between the hole and shaft diameters ◎0.01 Tapered or not Yes
Center pin tip shape No

Additional Products in this Category

Tech Support

Die & Mold Division
Tel:+52-442-672-7661
Mon. - Fri. 8 a.m. - 6 p.m. Sat. 8 a.m. - 12 p.m