• Debido al Tifón (Hagibis) que azotó Japón esta semana (12 de Oct), algunos productos de importación se ha visto afectados. Gracias por su comprensión.
    Due to the Typhoon (Hagibis) in Japan last week (12 Oct), some imported products may be delayed. Thank you for your understanding.

Quick-Fitting Joints For Mold Cooling -Integrated Plugs・Sockets (Heat-Resistant 120degree Series) /L-Shaped Joints-

Quick-Fitting Joints For Mold Cooling -Integrated Plugs・Sockets (Heat-Resistant 120degree Series) /L-Shaped Joints-

Click this image to zoom it.

Move the mouse over the image to zoom

  • Quick-Fitting Joints For Mold Cooling -Integrated Plugs・Sockets (Heat-Resistant 120degree Series) /L-Shaped Joints-
  • Quick-Fitting Joints For Mold Cooling -Integrated Plugs・Sockets (Heat-Resistant 120degree Series) /L-Shaped Joints-
  • Quick-Fitting Joints For Mold Cooling -Integrated Plugs・Sockets (Heat-Resistant 120degree Series) /L-Shaped Joints-
Main body: Brass C3604(C36000)(CU-ZN)+ Electroless nickel plating
    Release ring: Brass C3604(C36000)(CU-ZN)+ Electroless nickel plating
    Thread: Brass C3604(C36000)(CU-ZN)+ electroless nickel plating.
    Thread JIS B 0203 tapered thread for tubing R (PT).
    *Thread part is applied with sealant.
    Seal rubber: Fluoric rubber

QUICK-FITTING  JOINTS  FOR  MOLD  COOLING  -INTEGRATED  PLUGS�SOCKETS  (HEAT-RESISTANT  120degree  SERIES)  /L-SHAPED  JOINTS-:Related Image

QUICK-FITTING  JOINTS  FOR  MOLD  COOLING  -INTEGRATED  PLUGS�SOCKETS  (HEAT-RESISTANT  120degree  SERIES)  /L-SHAPED  JOINTS-:Related Image
M−120KL and M-120KH are made in integral structure,
    and cannot be disassembled.
Use in normal pressure 300kPa (3kgf/cm2) or lower.
Set the surge pressure (the pressure that acts instantaneously due to an impact flow) so that it does not exceed the maximum working pressure (300 kPa).
The exterior of M-120KL is similar to M-KL, so distinguish them from each other by observing the color of the rubber on the inside of the tube insertion hole.
    (M-120KL uses green rubber, and M-KL uses black rubber.)
Be sure to use an insert sleeve (Click here) when using M-120KL.
Keep water temperature under 120°C.
Part Number
M-120KH6-01-1
M-120KH8-01-1
M-120KH8-02-1
M-120KH10-02-1
M-120KH12-03-1
M-120KL6-01-1-F
M-120KL8-01-1-F
M-120KL8-02-1-F
M-120KL10-02-1-F
M-120KL10-03-1-F
M-120KL12-02-1-F
M-120KL12-03-1-F
Part NumberVolume DiscountDays to Ship RoHSApplicable hose outer diameter
(mm)
R/(PT)
(Nominal)
e (Height from the center)
(mm)
Available

6 Days or more

1061/823.2
Available

6 Days or more

1081/824.4
Available

6 Days or more

1081/425.9
Available

6 Days or more

10101/428
Available

6 Days or more

10123/832.4
Available

6 Days or more

1061/820.1
Available

Same day

Stock

1081/822.3
Available

6 Days or more

1081/422.3
Available

6 Days or more

10101/426.1
Available

6 Days or more

10103/826.1
Available

6 Days or more

10121/429.7
Available

6 Days or more

10123/829.7

Loading...

  1. 1

Specifications

QUICK-FITTING  JOINTS  FOR  MOLD  COOLING  -INTEGRATED  PLUGS�SOCKETS  (HEAT-RESISTANT  120degree  SERIES)  /L-SHAPED  JOINTS-:Related Image
 
QUICK-FITTING  JOINTS  FOR  MOLD  COOLING  -INTEGRATED  PLUGS�SOCKETS  (HEAT-RESISTANT  120degree  SERIES)  /L-SHAPED  JOINTS-:Related Image
•Dimension Table
Matching tubesTube inserting holeDdLaeBℓ1R(PT)Part Number
Outer×Inner dia.Hole dia. PDepth CTypeNo.
6×4616.512.542527.320.11281/8M-120KL6-01-1-F
8×6817.714.562831.322.3148-01-1-F
3132.2111/48-02-1-F
10×7.5102018.5835.538.726.11710-02-1-F
36.539.4123/810-03-1-F
12×91222.621.537.542.229.721111/412-02-1-F
938.542.9123/812-03-1-F
 
Matching tubesTube inserting holeDAllen side
B
Laeℓ1R(PT)Part Number
Outer×Inner dia.Hole dia. PDepth CTypeNo.
6×4616.512.51415.623.823.281/8M-120KH6-01-1
8×6817.714.51415.623.824.481/88-01-1
1720.428.325.9111/48-02-1
10×7.5102018.51720.428.328111/410-02-1
12×91222.621.52123.132.432.4123/812-03-1
 

Basic Information

Material Brass + Electroless nickel plated Connecting parts Hose Heat proof 120℃
With/without valve No valve Shape L-shaped Spanner installation section Yes

Additional Products in this Category

Tech Support

Die & Mold Division
Tel:+52-442-672-7661
Mon. - Fri. 8 a.m. - 6 p.m. Sat. 8 a.m. - 12 p.m