Tip Processed Center Pins With Cooling Hole -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection Type-

Part Number

Configured Part Number is shown.

 
Part Number
RDCPJ-5LB6-[70-150/0.01]
RDCPJ-5LB7-[70-200/0.01]
RDCPJ-5LB8-[70-250/0.01]
RDCPJ-5LB10-[70-250/0.01]
RDCPJ-5LB12-[70-250/0.01]
RDCPJ-5LB15-[70-250/0.01]
RDCPJ-5LB16-[70-250/0.01]
RDCPN-5LB6-[70-150/0.01]
RDCPN-5LB7-[70-200/0.01]
RDCPN-5LB8-[70-250/0.01]
RDCPN-5LB10-[70-250/0.01]
RDCPN-5LB12-[70-250/0.01]
Part NumberVolume DiscountDays to Ship RoHSHead thickness Shaft diameter tolerance D/P (Shaft diameter)
(mm)
Tip shape C (C chamfering width on the tip)
(mm)
K (Taper angle)
(°)
L (L dimension)
(mm)
R (Tip R chamfering)
(mm)
S (Tip tapered width)
(mm)

10 Days or more

106mm(JIS)-0.01/-0.026B--70 ~ 150--

10 Days or more

106mm(JIS)-0.01/-0.027B--70 ~ 200--

10 Days or more

108mm(JIS)-0.01/-0.028B--70 ~ 250--

10 Days or more

108mm(JIS)-0.01/-0.0210B--70 ~ 250--

10 Days or more

108mm(JIS)-0.01/-0.0212B--70 ~ 250--

10 Days or more

108mm(JIS)-0.01/-0.02 (Reference tolerance)15B--70 ~ 250--

10 Days or more

108mm(JIS)-0.01/-0.02 (Reference tolerance)16B--70 ~ 250--

10 Days or more

104mm(T4)-0.01/-0.026B--70 ~ 150--

10 Days or more

104mm(T4)-0.01/-0.027B--70 ~ 200--

10 Days or more

104mm(T4)-0.01/-0.028B--70 ~ 250--

10 Days or more

104mm(T4)-0.01/-0.0210B--70 ~ 250--

10 Days or more

104mm(T4)-0.01/-0.0212B--70 ~ 250--

Loading...

  1. 1

Basic Information

Material SKD61 Surface treatment Nitrided With/without cooling hole Yes
Applicable ejector sleeves inner diameter tolerance +0.01/0 or H7

Additional Products in this Category

Tech Support

Die & Mold Division
Tel:+52-442-672-7661
Mon. - Fri. 8 a.m. - 6 p.m. Sat. 8 a.m. - 12 p.m