• Debido al Tifón (Hagibis) que azotó Japón esta semana (12 de Oct), algunos productos de importación se ha visto afectados. Gracias por su comprensión.
    Due to the Typhoon (Hagibis) in Japan last week (12 Oct), some imported products may be delayed. Thank you for your understanding.

Straight Center Pins With Tip Processed -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.1mm Increments) Type-

Straight Center Pins With Tip Processed -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.1mm Increments) Type-

Click this image to zoom it.

Move the mouse over the image to zoom

Part Number

Configured Part Number is shown.

 
Part Number
CPJG-5LG4-[50-400/0.01]-P[3.5-3.9/0.1]-K[45-89/1]
CPJG-5LG4.5-[50-400/0.01]-P[4-4.4/0.1]-K[45-89/1]
CPJG-5LG5-[50-500/0.01]-P[4.5-4.9/0.1]-K[45-89/1]
CPJG-5LG5.5-[50-500/0.01]-P[5-5.4/0.1]-K[45-89/1]
CPJG-5LG6-[50-500/0.01]-P[5.5-5.9/0.1]-K[45-89/1]
CPJG-5LG6.5-[50-500/0.01]-P[6-6.4/0.1]-K[45-89/1]
CPJG-5LG7-[50-500/0.01]-P[6.5-6.9/0.1]-K[45-89/1]
CPJG-5LG8-[50-500/0.01]-P[7-7.9/0.1]-K[45-89/1]
CPJG-5LG10-[50-500/0.01]-P[8-9.9/0.1]-K[45-89/1]
CPJG-5LG12-[50-500/0.01]-P[10-11.9/0.1]-K[45-89/1]
CPJG-5LG15-[50-500/0.01]-P[12-14.9/0.1]-K[45-89/1]
CPJG-5LG16-[50-500/0.01]-P[15-15.9/0.1]-K[45-89/1]
CPNG-5LG2-[50-400/0.01]-P[1.5-1.9/0.1]-K[45-89/1]
CPNG-5LG2.5-[50-400/0.01]-P[2-2.4/0.1]-K[45-89/1]
CPNG-5LG3-[50-400/0.01]-P[2.5-2.9/0.1]-K[45-89/1]
CPNG-5LG3.5-[50-400/0.01]-P[3-3.4/0.1]-K[45-89/1]
CPNG-5LG4-[50-400/0.01]-P[3.5-3.9/0.1]-K[45-89/1]
CPNG-5LG4.5-[50-400/0.01]-P[4-4.4/0.1]-K[45-89/1]
CPNG-5LG5-[50-500/0.01]-P[4.5-4.9/0.1]-K[45-89/1]
CPNG-5LG5.5-[50-500/0.01]-P[5-5.4/0.1]-K[45-89/1]
CPNG-5LG6-[50-500/0.01]-P[5.5-5.9/0.1]-K[45-89/1]
CPNG-5LG6.5-[50-500/0.01]-P[6-6.4/0.1]-K[45-89/1]
CPNG-5LG7-[50-500/0.01]-P[6.5-6.9/0.1]-K[45-89/1]
CPNG-5LG8-[50-500/0.01]-P[7-7.9/0.1]-K[45-89/1]
CPNG-5LG10-[50-500/0.01]-P[8-9.9/0.1]-K[45-89/1]
CPNG-5LG12-[50-500/0.01]-P[10-11.9/0.1]-K[45-89/1]
Part NumberVolume DiscountDays to Ship RoHSHead thickness Shaft diameter tolerance D/P (Shaft diameter)
(mm)
Tip shape No. (Nominal diameter)
(mm)
C (C chamfering width on the tip)
(mm)
K (Taper angle)
(°)
L (L dimension)
(mm)
R (Tip R chamfering)
(mm)
S (Tip tapered width)
(mm)

10 Days or more

106mm(JIS)-0.01/-0.023.5 ~ 3.9G4-45 ~ 8950 ~ 400--

10 Days or more

106mm(JIS)-0.01/-0.024 ~ 4.4G4.5-45 ~ 8950 ~ 400--

10 Days or more

106mm(JIS)-0.01/-0.024.5 ~ 4.9G5-45 ~ 8950 ~ 500--

10 Days or more

106mm(JIS)-0.01/-0.025 ~ 5.4G5.5-45 ~ 8950 ~ 500--

10 Days or more

106mm(JIS)-0.01/-0.025.5 ~ 5.9G6-45 ~ 8950 ~ 500--

10 Days or more

106mm(JIS)-0.01/-0.026 ~ 6.4G6.5-45 ~ 8950 ~ 500--

10 Days or more

106mm(JIS)-0.01/-0.026.5 ~ 6.9G7-45 ~ 8950 ~ 500--

10 Days or more

108mm(JIS)-0.01/-0.027 ~ 7.9G8-45 ~ 8950 ~ 500--

10 Days or more

108mm(JIS)-0.01/-0.028 ~ 9.9G10-45 ~ 8950 ~ 500--

10 Days or more

108mm(JIS)-0.01/-0.0210 ~ 11.9G12-45 ~ 8950 ~ 500--

10 Days or more

108mm(JIS)-0.01/-0.02 (Reference tolerance)12 ~ 14.9G15-45 ~ 8950 ~ 500--

10 Days or more

108mm(JIS)-0.01/-0.02 (Reference tolerance)15 ~ 15.9G16-45 ~ 8950 ~ 500--

10 Days or more

104mm(T4)-0.01/-0.021.5 ~ 1.9G2-45 ~ 8950 ~ 400--

10 Days or more

104mm(T4)-0.01/-0.022 ~ 2.4G2.5-45 ~ 8950 ~ 400--

10 Days or more

104mm(T4)-0.01/-0.022.5 ~ 2.9G3-45 ~ 8950 ~ 400--

10 Days or more

104mm(T4)-0.01/-0.023 ~ 3.4G3.5-45 ~ 8950 ~ 400--

10 Days or more

104mm(T4)-0.01/-0.023.5 ~ 3.9G4-45 ~ 8950 ~ 400--

10 Days or more

104mm(T4)-0.01/-0.024 ~ 4.4G4.5-45 ~ 8950 ~ 400--

10 Days or more

104mm(T4)-0.01/-0.024.5 ~ 4.9G5-45 ~ 8950 ~ 500--

10 Days or more

104mm(T4)-0.01/-0.025 ~ 5.4G5.5-45 ~ 8950 ~ 500--

10 Days or more

104mm(T4)-0.01/-0.025.5 ~ 5.9G6-45 ~ 8950 ~ 500--

10 Days or more

104mm(T4)-0.01/-0.026 ~ 6.4G6.5-45 ~ 8950 ~ 500--

10 Days or more

104mm(T4)-0.01/-0.026.5 ~ 6.9G7-45 ~ 8950 ~ 500--

10 Days or more

104mm(T4)-0.01/-0.027 ~ 7.9G8-45 ~ 8950 ~ 500--

10 Days or more

104mm(T4)-0.01/-0.028 ~ 9.9G10-45 ~ 8950 ~ 500--

10 Days or more

104mm(T4)-0.01/-0.0210 ~ 11.9G12-45 ~ 8950 ~ 500--

Loading...

  1. 1

Basic Information

Material SKD61 Surface treatment Nitrided With/without cooling hole No
Applicable ejector sleeves inner diameter tolerance +0.01/0 or H7

Additional Products in this Category

Tech Support

Die & Mold Division
Tel:+52-442-672-7661
Mon. - Fri. 8 a.m. - 6 p.m. Sat. 8 a.m. - 12 p.m