• Debido a la posibilidad del impácto del Tifón (Hagibis) en Japón en esta semana, algunos productos importados se podrían retrasar. Gracias por su comprensión.
    Due to the possibility of a Typhoon (Hagibis) in Japan this week, some imported products may be delayed. Thank you for your understanding.

Straight Center Pins With Tip Processed -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.1mm Increments) Type-

Straight Center Pins With Tip Processed -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.1mm Increments) Type-

Click this image to zoom it.

Move the mouse over the image to zoom

Part Number

Configured Part Number is shown.

 
Part Number
CPJG-5LB4-[50-400/0.01]-P[3.5-3.9/0.1]
CPJG-5LB4.5-[50-400/0.01]-P[4-4.4/0.1]
CPJG-5LB5-[50-500/0.01]-P[4.5-4.9/0.1]
CPJG-5LB5.5-[50-500/0.01]-P[5-5.4/0.1]
CPJG-5LB6-[50-500/0.01]-P[5.5-5.9/0.1]
CPJG-5LB6.5-[50-500/0.01]-P[6-6.4/0.1]
CPJG-5LB7-[50-500/0.01]-P[6.5-6.9/0.1]
CPJG-5LB8-[50-500/0.01]-P[7-7.9/0.1]
CPJG-5LB10-[50-500/0.01]-P[8-9.9/0.1]
CPJG-5LB12-[50-500/0.01]-P[10-11.9/0.1]
CPJG-5LB15-[50-500/0.01]-P[12-14.9/0.1]
CPJG-5LB16-[50-500/0.01]-P[15-15.9/0.1]
CPNG-5LB2-[50-400/0.01]-P[1.5-1.9/0.1]
CPNG-5LB2.5-[50-400/0.01]-P[2-2.4/0.1]
CPNG-5LB3-[50-400/0.01]-P[2.5-2.9/0.1]
CPNG-5LB3.5-[50-400/0.01]-P[3-3.4/0.1]
CPNG-5LB4-[50-400/0.01]-P[3.5-3.9/0.1]
CPNG-5LB4.5-[50-400/0.01]-P[4-4.4/0.1]
CPNG-5LB5-[50-500/0.01]-P[4.5-4.9/0.1]
CPNG-5LB5.5-[50-500/0.01]-P[5-5.4/0.1]
CPNG-5LB6-[50-500/0.01]-P[5.5-5.9/0.1]
CPNG-5LB6.5-[50-500/0.01]-P[6-6.4/0.1]
CPNG-5LB7-[50-500/0.01]-P[6.5-6.9/0.1]
CPNG-5LB8-[50-500/0.01]-P[7-7.9/0.1]
CPNG-5LB10-[50-500/0.01]-P[8-9.9/0.1]
CPNG-5LB12-[50-500/0.01]-P[10-11.9/0.1]
Part NumberVolume DiscountDays to Ship RoHSHead thickness Shaft diameter tolerance D/P (Shaft diameter)
(mm)
Tip shape No. (Nominal diameter)
(mm)
C (C chamfering width on the tip)
(mm)
K (Taper angle)
(°)
L (L dimension)
(mm)
R (Tip R chamfering)
(mm)
S (Tip tapered width)
(mm)

10 Days or more

106mm(JIS)-0.01/-0.023.5 ~ 3.9B4--50 ~ 400--

10 Days or more

106mm(JIS)-0.01/-0.024 ~ 4.4B4.5--50 ~ 400--

10 Days or more

106mm(JIS)-0.01/-0.024.5 ~ 4.9B5--50 ~ 500--

10 Days or more

106mm(JIS)-0.01/-0.025 ~ 5.4B5.5--50 ~ 500--

10 Days or more

106mm(JIS)-0.01/-0.025.5 ~ 5.9B6--50 ~ 500--

10 Days or more

106mm(JIS)-0.01/-0.026 ~ 6.4B6.5--50 ~ 500--

10 Days or more

106mm(JIS)-0.01/-0.026.5 ~ 6.9B7--50 ~ 500--

10 Days or more

108mm(JIS)-0.01/-0.027 ~ 7.9B8--50 ~ 500--

10 Days or more

108mm(JIS)-0.01/-0.028 ~ 9.9B10--50 ~ 500--

10 Days or more

108mm(JIS)-0.01/-0.0210 ~ 11.9B12--50 ~ 500--

10 Days or more

108mm(JIS)-0.01/-0.02 (Reference tolerance)12 ~ 14.9B15--50 ~ 500--

10 Days or more

108mm(JIS)-0.01/-0.02 (Reference tolerance)15 ~ 15.9B16--50 ~ 500--

10 Days or more

104mm(T4)-0.01/-0.021.5 ~ 1.9B2--50 ~ 400--

10 Days or more

104mm(T4)-0.01/-0.022 ~ 2.4B2.5--50 ~ 400--

10 Days or more

104mm(T4)-0.01/-0.022.5 ~ 2.9B3--50 ~ 400--

10 Days or more

104mm(T4)-0.01/-0.023 ~ 3.4B3.5--50 ~ 400--

10 Days or more

104mm(T4)-0.01/-0.023.5 ~ 3.9B4--50 ~ 400--

10 Days or more

104mm(T4)-0.01/-0.024 ~ 4.4B4.5--50 ~ 400--

10 Days or more

104mm(T4)-0.01/-0.024.5 ~ 4.9B5--50 ~ 500--

10 Days or more

104mm(T4)-0.01/-0.025 ~ 5.4B5.5--50 ~ 500--

10 Days or more

104mm(T4)-0.01/-0.025.5 ~ 5.9B6--50 ~ 500--

10 Days or more

104mm(T4)-0.01/-0.026 ~ 6.4B6.5--50 ~ 500--

10 Days or more

104mm(T4)-0.01/-0.026.5 ~ 6.9B7--50 ~ 500--

10 Days or more

104mm(T4)-0.01/-0.027 ~ 7.9B8--50 ~ 500--

10 Days or more

104mm(T4)-0.01/-0.028 ~ 9.9B10--50 ~ 500--

10 Days or more

104mm(T4)-0.01/-0.0210 ~ 11.9B12--50 ~ 500--

Loading...

  1. 1

Basic Information

Material SKD61 Surface treatment Nitrided With/without cooling hole No
Applicable ejector sleeves inner diameter tolerance +0.01/0 or H7

Additional Products in this Category

Tech Support

Die & Mold Division
Tel:+52-442-672-7661
Mon. - Fri. 8 a.m. - 6 p.m. Sat. 8 a.m. - 12 p.m