• Debido a la posibilidad del impácto del Tifón (Hagibis) en Japón en esta semana, algunos productos importados se podrían retrasar. Gracias por su comprensión.
    Due to the possibility of a Typhoon (Hagibis) in Japan this week, some imported products may be delayed. Thank you for your understanding.

Straight Center Pins With Tip Processed -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection Type-

Straight Center Pins With Tip Processed -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection Type-

Click this image to zoom it.

Move the mouse over the image to zoom

Part Number

Configured Part Number is shown.

 
Part Number
CPJ-5LB4-[50-500/0.01]
CPJ-5LB4.5-[50-500/0.01]
CPJ-5LB5-[50-500/0.01]
CPJ-5LB5.5-[50-500/0.01]
CPJ-5LB6-[50-600/0.01]
CPJ-5LB6.5-[50-600/0.01]
CPJ-5LB7-[50-600/0.01]
CPJ-5LB8-[50-600/0.01]
CPJ-5LB10-[50-600/0.01]
CPJ-5LB12-[50-700/0.01]
CPJ-5LB15-[50-700/0.01]
CPJ-5LB16-[50-700/0.01]
CPN-5LB1.5-[50-250/0.01]
CPN-5LB2-[50-400/0.01]
CPN-5LB2.5-[50-400/0.01]
CPN-5LB3-[50-400/0.01]
CPN-5LB3.5-[50-400/0.01]
CPN-5LB4-[50-400/0.01]
CPN-5LB4.5-[50-400/0.01]
CPN-5LB5-[50-500/0.01]
CPN-5LB5.5-[50-500/0.01]
CPN-5LB6-[50-500/0.01]
CPN-5LB6.5-[50-500/0.01]
CPN-5LB7-[50-500/0.01]
CPN-5LB8-[50-500/0.01]
CPN-5LB10-[50-500/0.01]
CPN-5LB12-[50-500/0.01]
Part NumberVolume DiscountDays to Ship RoHSHead thickness Shaft diameter tolerance D/P (Shaft diameter)
(mm)
Tip shape C (C chamfering width on the tip)
(mm)
K (Taper angle)
(°)
L (L dimension)
(mm)
R (Tip R chamfering)
(mm)
S (Tip tapered width)
(mm)

8 Days or more

106mm(JIS)-0.01/-0.024B--50 ~ 500--

8 Days or more

106mm(JIS)-0.01/-0.024.5B--50 ~ 500--

8 Days or more

106mm(JIS)-0.01/-0.025B--50 ~ 500--

8 Days or more

106mm(JIS)-0.01/-0.025.5B--50 ~ 500--

8 Days or more

106mm(JIS)-0.01/-0.02 (Reference tolerance)6B--50 ~ 600--

8 Days or more

106mm(JIS)-0.01/-0.02 (Reference tolerance)6.5B--50 ~ 600--

8 Days or more

106mm(JIS)-0.01/-0.02 (Reference tolerance)7B--50 ~ 600--

8 Days or more

108mm(JIS)-0.01/-0.02 (Reference tolerance)8B--50 ~ 600--

8 Days or more

108mm(JIS)-0.01/-0.02 (Reference tolerance)10B--50 ~ 600--

8 Days or more

108mm(JIS)-0.01/-0.02 (Reference tolerance)12B--50 ~ 700--

8 Days or more

108mm(JIS)-0.01/-0.02 (Reference tolerance)15B--50 ~ 700--

8 Days or more

108mm(JIS)-0.01/-0.02 (Reference tolerance)16B--50 ~ 700--

8 Days or more

104mm(T4)-0.01/-0.021.5B--50 ~ 250--

8 Days or more

104mm(T4)-0.01/-0.022B--50 ~ 400--

8 Days or more

104mm(T4)-0.01/-0.022.5B--50 ~ 400--

8 Days or more

104mm(T4)-0.01/-0.023B--50 ~ 400--

8 Days or more

104mm(T4)-0.01/-0.023.5B--50 ~ 400--

8 Days or more

104mm(T4)-0.01/-0.024B--50 ~ 400--

8 Days or more

104mm(T4)-0.01/-0.024.5B--50 ~ 400--

8 Days or more

104mm(T4)-0.01/-0.025B--50 ~ 500--

8 Days or more

104mm(T4)-0.01/-0.025.5B--50 ~ 500--

8 Days or more

104mm(T4)-0.01/-0.02 (Reference tolerance)6B--50 ~ 500--

8 Days or more

104mm(T4)-0.01/-0.02 (Reference tolerance)6.5B--50 ~ 500--

8 Days or more

104mm(T4)-0.01/-0.02 (Reference tolerance)7B--50 ~ 500--

8 Days or more

104mm(T4)-0.01/-0.02 (Reference tolerance)8B--50 ~ 500--

8 Days or more

104mm(T4)-0.01/-0.02 (Reference tolerance)10B--50 ~ 500--

8 Days or more

104mm(T4)-0.01/-0.02 (Reference tolerance)12B--50 ~ 500--

Loading...

  1. 1

Basic Information

Material SKD61 Surface treatment Nitrided With/without cooling hole No
Applicable ejector sleeves inner diameter tolerance +0.01/0 or H7

Additional Products in this Category

Tech Support

Die & Mold Division
Tel:+52-442-672-7661
Mon. - Fri. 8 a.m. - 6 p.m. Sat. 8 a.m. - 12 p.m