Straight Center Pins With Tip Processed -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection Type-

Straight Center Pins With Tip Processed -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection Type-

Click this image to zoom it.

Move the mouse over the image to zoom

Part Number

Configured Part Number is shown.

 
Part Number
CPJ-5LG4-[50-500/0.01]-K[45-89/1]
CPJ-5LG4.5-[50-500/0.01]-K[45-89/1]
CPJ-5LG5-[50-500/0.01]-K[45-89/1]
CPJ-5LG5.5-[50-500/0.01]-K[45-89/1]
CPJ-5LG6-[50-600/0.01]-K[45-89/1]
CPJ-5LG6.5-[50-600/0.01]-K[45-89/1]
CPJ-5LG7-[50-600/0.01]-K[1-45/1]
CPJ-5LG8-[50-600/0.01]-K[45-89/1]
CPJ-5LG10-[50-600/0.01]-K[45-89/1]
CPJ-5LG12-[50-700/0.01]-K[45-89/1]
CPJ-5LG15-[50-700/0.01]-K[45-89/1]
CPJ-5LG16-[50-700/0.01]-K[45-89/1]
CPN-5LG1.5-[50-250/0.01]-K[45-89/1]
CPN-5LG2-[50-400/0.01]-K[45-89/1]
CPN-5LG2.5-[50-400/0.01]-K[45-89/1]
CPN-5LG3-[50-400/0.01]-K[45-89/1]
CPN-5LG3.5-[50-400/0.01]-K[45-89/1]
CPN-5LG4-[50-400/0.01]-K[45-89/1]
CPN-5LG4.5-[50-400/0.01]-K[45-89/1]
CPN-5LG5-[50-500/0.01]-K[45-89/1]
CPN-5LG5.5-[50-500/0.01]-K[45-89/1]
CPN-5LG6-[50-500/0.01]-K[45-89/1]
CPN-5LG6.5-[50-500/0.01]-K[45-89/1]
CPN-5LG7-[50-500/0.01]-K[45-89/1]
CPN-5LG8-[50-500/0.01]-K[45-89/1]
CPN-5LG10-[50-500/0.01]-K[45-89/1]
CPN-5LG12-[50-500/0.01]-K[45-89/1]
Part NumberVolume DiscountDays to Ship RoHSHead thickness Shaft diameter tolerance D/P (Shaft diameter)
(mm)
Tip shape C (C chamfering width on the tip)
(mm)
K (Taper angle)
(°)
L (L dimension)
(mm)
R (Tip R chamfering)
(mm)
S (Tip tapered width)
(mm)

8 Days or more

106mm(JIS)-0.01/-0.024G-45 ~ 8950 ~ 500--

8 Days or more

106mm(JIS)-0.01/-0.024.5G-45 ~ 8950 ~ 500--

8 Days or more

106mm(JIS)-0.01/-0.025G-45 ~ 8950 ~ 500--

8 Days or more

106mm(JIS)-0.01/-0.025.5G-45 ~ 8950 ~ 500--

8 Days or more

106mm(JIS)-0.01/-0.02 (Reference tolerance)6G-45 ~ 8950 ~ 600--

8 Days or more

106mm(JIS)-0.01/-0.02 (Reference tolerance)6.5G-45 ~ 8950 ~ 600--

8 Days or more

106mm(JIS)-0.01/-0.02 (Reference tolerance)7G-1 ~ 4550 ~ 600--

8 Days or more

108mm(JIS)-0.01/-0.02 (Reference tolerance)8G-45 ~ 8950 ~ 600--

8 Days or more

108mm(JIS)-0.01/-0.02 (Reference tolerance)10G-45 ~ 8950 ~ 600--

8 Days or more

108mm(JIS)-0.01/-0.02 (Reference tolerance)12G-45 ~ 8950 ~ 700--

8 Days or more

108mm(JIS)-0.01/-0.02 (Reference tolerance)15G-45 ~ 8950 ~ 700--

8 Days or more

108mm(JIS)-0.01/-0.02 (Reference tolerance)16G-45 ~ 8950 ~ 700--

8 Days or more

104mm(T4)-0.01/-0.021.5G-45 ~ 8950 ~ 250--

8 Days or more

104mm(T4)-0.01/-0.022G-45 ~ 8950 ~ 400--

8 Days or more

104mm(T4)-0.01/-0.022.5G-45 ~ 8950 ~ 400--

8 Days or more

104mm(T4)-0.01/-0.023G-45 ~ 8950 ~ 400--

8 Days or more

104mm(T4)-0.01/-0.023.5G-45 ~ 8950 ~ 400--

8 Days or more

104mm(T4)-0.01/-0.024G-45 ~ 8950 ~ 400--

8 Days or more

104mm(T4)-0.01/-0.024.5G-45 ~ 8950 ~ 400--

8 Days or more

104mm(T4)-0.01/-0.025G-45 ~ 8950 ~ 500--

8 Days or more

104mm(T4)-0.01/-0.025.5G-45 ~ 8950 ~ 500--

8 Days or more

104mm(T4)-0.01/-0.02 (Reference tolerance)6G-45 ~ 8950 ~ 500--

8 Days or more

104mm(T4)-0.01/-0.02 (Reference tolerance)6.5G-45 ~ 8950 ~ 500--

8 Days or more

104mm(T4)-0.01/-0.02 (Reference tolerance)7G-45 ~ 8950 ~ 500--

8 Days or more

104mm(T4)-0.01/-0.02 (Reference tolerance)8G-45 ~ 8950 ~ 500--

8 Days or more

104mm(T4)-0.01/-0.02 (Reference tolerance)10G-45 ~ 8950 ~ 500--

8 Days or more

104mm(T4)-0.01/-0.02 (Reference tolerance)12G-45 ~ 8950 ~ 500--

Loading...

  1. 1

Basic Information

Material SKD61 Surface treatment Nitrided With/without cooling hole No
Applicable ejector sleeves inner diameter tolerance +0.01/0 or H7

Additional Products in this Category

Tech Support

Die & Mold Division
Tel:+52-442-672-7661
Mon. - Fri. 8 a.m. - 6 p.m. Sat. 8 a.m. - 12 p.m