Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type-

Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type-

Click this image to zoom it.

Move the mouse over the image to zoom

Part Number

Configured Part Number is shown.

 
Part Number
ESJB15-[40-500/0.01]-P[12.01-14.99/0.01]-V[2.5-12/0.1]-C[3-12.5/0.1]-S[20-150/1]
ESJB15-[40-500/0.01]-P[12.01-14.99/0.01]-V[2.5-12/0.1]-C[3-12.5/0.5]-S[20-150/1]
ESJB15-[500.01-799.91/0.1]-P[12.01-14.99/0.01]-V[2.5-12/0.1]-C[3-12.5/0.1]-S[20-150/1]
ESJB15-[500.01-799.91/0.1]-P[12.01-14.99/0.01]-V[2.5-12/0.1]-C[3-12.5/0.5]-S[20-150/1]
ESJB16-[40-500/0.01]-P[15.01-15.99/0.01]-V[3-13/0.1]-C[3.5-13.5/0.1]-S[20-150/1]
ESJB16-[40-500/0.01]-P[15.01-15.99/0.01]-V[3-13/0.1]-C[3.5-13.5/0.5]-S[20-150/1]
ESJB16-[500.1-800/0.1]-P[15.01-15.99/0.01]-V[3-13/0.1]-C[3.5-13.5/0.1]-S[20-150/1]
ESJB16-[500.1-800/0.1]-P[15.01-15.99/0.01]-V[3-13/0.1]-C[3.5-13.5/0.5]-S[20-150/1]
ESJB20-[40-500/0.01]-P[16.01-19.99/0.01]-V[3-16/0.1]-C[3.5-17/0.1]-S[20-150/1]
ESJB20-[40-500/0.01]-P[16.01-19.99/0.01]-V[3-16/0.1]-C[3.5-17/0.5]-S[20-150/1]
ESJB20-[500.1-800/0.1]-P[16.01-19.99/0.01]-V[3-16/0.1]-C[3.5-17/0.1]-S[20-150/1]
ESJB20-[500.1-800/0.1]-P[16.01-19.99/0.01]-V[3-16/0.1]-C[3.5-17/0.5]-S[20-150/1]
Part NumberVolume DiscountDays to Ship RoHSHead thickness Shaft diameter tolerance D/P (Shaft diameter)
(mm)
V (Hole diameter)
(mm)
Shaft diameter designation method L (L dimension)
(mm)
C (Recess diameter)
(mm)
S (V hole diameter length)
(mm)

8 Days or more

108mm(JIS)-0.01/-0.0312.01 ~ 14.992.5 ~ 12Shaft diameter 0.01mm increments40 ~ 5003 ~ 12.520 ~ 150

8 Days or more

108mm(JIS)-0.01/-0.0312.01 ~ 14.992.5 ~ 12Shaft diameter 0.01mm increments40 ~ 5003 ~ 12.520 ~ 150

8 Days or more

108mm(JIS)-0.01/-0.0312.01 ~ 14.992.5 ~ 12Shaft diameter 0.01mm increments500.01 ~ 799.913 ~ 12.520 ~ 150

8 Days or more

108mm(JIS)-0.01/-0.0312.01 ~ 14.992.5 ~ 12Shaft diameter 0.01mm increments500.01 ~ 799.913 ~ 12.520 ~ 150

8 Days or more

108mm(JIS)-0.01/-0.0315.01 ~ 15.993 ~ 13Shaft diameter 0.01mm increments40 ~ 5003.5 ~ 13.520 ~ 150

8 Days or more

108mm(JIS)-0.01/-0.0315.01 ~ 15.993 ~ 13Shaft diameter 0.01mm increments40 ~ 5003.5 ~ 13.520 ~ 150

8 Days or more

108mm(JIS)-0.01/-0.0315.01 ~ 15.993 ~ 13Shaft diameter 0.01mm increments500.1 ~ 8003.5 ~ 13.520 ~ 150

8 Days or more

108mm(JIS)-0.01/-0.0315.01 ~ 15.993 ~ 13Shaft diameter 0.01mm increments500.1 ~ 8003.5 ~ 13.520 ~ 150

8 Days or more

108mm(JIS)-0.01/-0.0316.01 ~ 19.993 ~ 16Shaft diameter 0.01mm increments40 ~ 5003.5 ~ 1720 ~ 150

8 Days or more

108mm(JIS)-0.01/-0.0316.01 ~ 19.993 ~ 16Shaft diameter 0.01mm increments40 ~ 5003.5 ~ 1720 ~ 150

8 Days or more

108mm(JIS)-0.01/-0.0316.01 ~ 19.993 ~ 16Shaft diameter 0.01mm increments500.1 ~ 8003.5 ~ 1720 ~ 150

8 Days or more

108mm(JIS)-0.01/-0.0316.01 ~ 19.993 ~ 16Shaft diameter 0.01mm increments500.1 ~ 8003.5 ~ 1720 ~ 150

Loading...

  1. 1

Basic Information

Product composition Single sleeve Material SKD61 Surface treatment Nitrided
Concentricity between the hole and shaft diameters ◎0.06 Boring method Reaming Inner dia. tolerance H7
Tapered or not No Center pin tip shape No

Additional Products in this Category

Tech Support

Die & Mold Division
Tel:+52-442-672-7661
Mon. - Fri. 8 a.m. - 6 p.m. Sat. 8 a.m. - 12 p.m