Burring Punches DLC Coating -Tip R Jector Type-

Burring Punches  DLC Coating  -Tip R Jector Type-

Click this image to zoom it.

Move the mouse over the image to zoom

Part Number

Configured Part Number is shown.

 
Part Number
AN-PJMS4-[40-80/10]-V[2-3.99/0.01]-P[1-3.69/0.01]-F[30-78/0.1]
AN-PJMS5-[40-80/10]-V[2-4.99/0.01]-P[2-4.69/0.01]-F[30-78/0.1]
AN-PJMS6-[40-80/10]-V[2-5.99/0.01]-P[2-5.69/0.01]-F[30-78/0.1]
AN-PJMS8-[40-80/10]-V[3-7.99/0.01]-P[3-7.69/0.01]-F[30-78/0.1]
AN-PJMS10-[40-80/10]-V[3-9.99/0.01]-P[3-9.69/0.01]-F[30-78/0.1]
ANW-PJMS4-[40-80/10]-V[2-3.99/0.01]-P[1-3.9/0.01]-F[30-78/0.1]
ANW-PJMS5-[40-80/10]-V[2-4.99/0.01]-P[2-4.9/0.01]-F[30-78/0.1]
ANW-PJMS6-[40-80/10]-V[2-5.99/0.01]-P[2-5.9/0.01]-F[30-78/0.1]
ANW-PJMS8-[40-80/10]-V[2-7.99/0.01]-P[3-7.9/0.01]-F[30-78/0.1]
ANW-PJMS10-[40-80/10]-V[3-9.99/0.01]-P[2.5-9.96/0.01]-F[30-78/0.1]
N-PJMS4-[40-80/10]-V[2-3.99/0.01]-P[1-3.69/0.01]-F[30-78/0.1]
N-PJMS5-[40-80/10]-V[2-4.99/0.01]-P[2-4.69/0.01]-F[30-78/0.1]
N-PJMS6-[40-80/10]-V[2-5.99/0.01]-P[2-5.69/0.01]-F[30-78/0.1]
N-PJMS8-[40-80/10]-V[3-7.99/0.01]-P[3-7.69/0.01]-F[30-78/0.1]
N-PJMS10-[40-80/10]-V[3-9.99/0.01]-P[3-9.69/0.01]-F[30-78/0.1]
NW-PJMS4-[40-80/10]-V[2-3.99/0.01]-P[1-3.9/0.01]-F[30-78/0.1]
NW-PJMS5-[40-80/10]-V[2-4.99/0.01]-P[2-4.9/0.01]-F[30-78/0.1]
NW-PJMS6-[40-80/10]-V[2-5.99/0.01]-P[2-5.9/0.01]-F[30-78/0.1]
NW-PJMS8-[40-80/10]-V[2-7.99/0.01]-P[3-7.9/0.01]-F[30-78/0.1]
NW-PJMS10-[40-80/10]-V[3-9.99/0.01]-P[2.5-9.96/0.01]-F[30-78/0.1]
Part NumberVolume DiscountDays to Ship RoHSSurface treatment L (Length)
(mm)
Shank diameter tolerance D (Shank diameter)
(mm)
F
(mm)
P (Tip dimension)
(mm)
V (Tip dimension)
(mm)

13 Days or more

10Without DLC foundation40 ~ 80+0.005/0430 ~ 781 ~ 3.692 ~ 3.99

13 Days or more

10Without DLC foundation40 ~ 80+0.005/0530 ~ 782 ~ 4.692 ~ 4.99

13 Days or more

10Without DLC foundation40 ~ 80+0.005/0630 ~ 782 ~ 5.692 ~ 5.99

13 Days

-Without DLC foundation40 ~ 80+0.005/0830 ~ 783 ~ 7.693 ~ 7.99

13 Days

-Without DLC foundation40 ~ 80+0.005/01030 ~ 783 ~ 9.693 ~ 9.99

13 Days or more

10DLC foundation WPC40 ~ 80+0.005/0430 ~ 781 ~ 3.92 ~ 3.99

13 Days or more

10DLC foundation WPC40 ~ 80+0.005/0530 ~ 782 ~ 4.92 ~ 4.99

13 Days or more

10DLC foundation WPC40 ~ 80+0.005/0630 ~ 782 ~ 5.92 ~ 5.99

13 Days or more

10DLC foundation WPC40 ~ 80+0.005/0830 ~ 783 ~ 7.92 ~ 7.99

13 Days or more

10DLC foundation WPC40 ~ 80+0.005/01030 ~ 782.5 ~ 9.963 ~ 9.99

13 Days or more

10Without DLC foundation40 ~ 80m5430 ~ 781 ~ 3.692 ~ 3.99

13 Days or more

10Without DLC foundation40 ~ 80m5530 ~ 782 ~ 4.692 ~ 4.99

13 Days or more

10Without DLC foundation40 ~ 80m5630 ~ 782 ~ 5.692 ~ 5.99

13 Days

-Without DLC foundation40 ~ 80m5830 ~ 783 ~ 7.693 ~ 7.99

13 Days

-Without DLC foundation40 ~ 80m51030 ~ 783 ~ 9.693 ~ 9.99

13 Days or more

10DLC foundation WPC40 ~ 80m5430 ~ 781 ~ 3.92 ~ 3.99

13 Days or more

10DLC foundation WPC40 ~ 80m5530 ~ 782 ~ 4.92 ~ 4.99

13 Days or more

10DLC foundation WPC40 ~ 80m5630 ~ 782 ~ 5.92 ~ 5.99

13 Days or more

10DLC foundation WPC40 ~ 80m5830 ~ 783 ~ 7.92 ~ 7.99

13 Days or more

10DLC foundation WPC40 ~ 80m51030 ~ 782.5 ~ 9.963 ~ 9.99

Loading...

  1. 1

Basic Information

Tip shape Burring punches With/without jector With Material Powdered high-speed steel
B (Tip length) Short

Additional Products in this Category

Tech Support

Die & Mold Division
Tel:+52-442-672-7661
Mon. - Fri. 8 a.m. - 6 p.m. Sat. 8 a.m. - 12 p.m