inCAD Library
inCAD Library

Please read before use

What is inCAD Library?

  • Helpful application examples for mechanical engineers.

The Concept of inCAD Library

  • Online application library with a range of ideas for all manufacturing industries.
  • Save design time and learn new design applications when you are concepting new machines.

Disclaimer

  • MISUMI may not offer all parts in each application design. Available parts can only be purchased separately not as a unit shown in each application design.
  • MISUMI does not guarantee quality, accuracy, functionality, safety or reliability for the combination of the parts in each application example. Accept these points prior to use.
  • 2014 Copyright MISUMI
  • The data cannot be used for any purposes (including sales promotion) except for designing your machine.
  • All associated CAD is free. Misumi reserves the right at its sole discretion to cancel, terminate or modify this offer.
  • MISUMI may change, add or delete application examples posted without prior notice.
  • MISUMI assumes no responsibilities for any damage incurred resulting from your use of the Service or any change, addition or deletion by MISUMI of the application examples for any reason whatsoever.

inCAD Library Features

  1. Get great new design ideas for these application examples.
  2. Over 300 design application ideas
    collected from dozens of industries!

  3. Find application examples quickly! Search by function, workpiece shape, etc.

  4. Download the CAD models for each application example.
  5. Log in to download free CAD models.
    Download CAD for the entire application example!

Good IDEA! button

Click the Good IDEA! Button when you like an application example!

*Can only be clicked once per application example.

  • Upper right corner on the page of application example details

  • Pop-up dialog for CAD data downloading

Page top

Keyword Search
No. Search
SNS: 

No.000105 Warm Water Testing Tank

Simplified warm water test.

Relevant category

Sheathed heater for liquid heating

Product name Sheathed Heaters for Liquid Heating - Plug Type
Part number MSHPW4
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Suitable for water heating.

Back to page top

Risk info.

Required heat capacity and quantity will vary with amount of water.

Back to page top

Available sizes

■Sheathed heater (Standard type)

Plug type Flange type
Material Heater element 316L Stainless Steel
Plug CF-8M Stainless Steel Cast
Flange CF-8M Stainless Steel Cast
Cap Phenolic resin
Power source NBR
Accessory Gasket Non-asbestos

■Sizes and Dimensions

Type Dimensions(mm) Length(mm)

Plug type
for water heating

Flange type
for water heating
83x72 297
327
357
427
497
557
627
697
Plug type
for oil heating
φ130 319
489
669
849
979

■Power - Voltage - Heater element length

Type Electrical power
(W)
Voltage
(V)
Heater element length
(mm)
Plug type
for water heating

Flange type
for water heating
1000 200 170
2000 200
3000 230
4000 300
5000 370
6000 430
8000 500
10000 570(700)
Plug type
for oil heating
1000 200 230
2000 400
3000 580
4000 760
5000 890

Back to page top

Performance info.

■Speeds・Loads (Load info.) of sheathed heater

Type Electrical power
(W)
Voltage
(V)
Power density
(W/c㎡)
Plug type
for water heating

Flange type
for water heating
1000 200 3.5
2000 6
3000 7
4000
5000
6000
8000 8
10000 8.5(7.0)
Plug type
for oil heating
1000 200 2.5
2000
3000
4000
5000

Back to page top

Ball valve

Product name Ball Valves - Stainless Steel, PT Male / PT Female
Part number BSFFA25A
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Popular as drain valve

Back to page top

Available sizes

■Ball valve (Reduced bore lever handle type)

Nominal Plumbing size Hole DIA. Width across flats Length Handle length
8A 1/4 4.5(5) 17 39 60(65)
10A 3/8 6.8(7) 21 44 70(68)
15A 1/2 9.2 25 56.5(59) 85(82)
20A 3/4 12.5 32 59(60) 85(82)
25A 1 16(15) 38 71(72) 100

* Fluorine resin ball seat type dimensions are in ( )

Back to page top

Performance info.

■Ball valve Speeds・Loads (Load info.)

Material Max. operating pressure
C37700 Brass Glass fiber filled fluorine resin Water - Oil - Air: 4.12MPa
CF-8 Stainless Steel Cast Fluorine resin Water - Oil - Air - Gas: 4.12MPa,
Saturated steam
CF-8M Stainless Steel Cast Fluorine resin

Back to page top

IDEA NOTE Heater layout

Heat load on the workpiece is stabilized by heater layout assuming the warm water in the tank creates natural convection.

IDEA NOTE Heater mounting

Since there are 4 heater mounting holes, up to four heaters can be used.

  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Download (Unit Assembly)

    CAD Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when you find interesting design tips.


    This data is utilized in order to list more useful application examples in the future.

    CAD Data Limitations

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. Unit assembly Data consists of some sub-assemblies.
      It is configured so that each sub-assembly unit can be used as it is or edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The dimensions of the MISUMI parts in the Data, which can be specifed at 1mm intervals, can be edited under historical data.
    6. The Data including the third-part components are made by the Company.

    Page top

  • * Unit assembly Data consists of some sub-assemblies.
       It is configured so that each sub-assembly unit can be used as it is or edited.

Application Overview

Purpose

  • Measure expansion of resin rail submerged in warm water tank.

Points for use

  • Warm the tank water using heaters.
  • Resin rails mounted on the posts will be exposed to warm water (Approx. 50°C).
    The rails are fixed using clamps on the left, and the right side. Clamps hold the rails with some clearances considering rail expansion due to heat.
  • Resin rail expansions are measured in the following steps.
    ① Mount the rails and fix both sides on resin guide clamps before the water (20℃) is heated.
    ② Measure the workpiece from the right side of the resin clamp to the right ends of the workpieces.
    ③ With the workpiece mounted, turn ON the heater and heat the water in the tank to 50℃.
    ④ Measure in the same manner as ② (Take care not to get burned).

Target workpiece

  • Resin rails
    Dims.: W420 x D25 x H40 mm
    Weight: 0.5kg

Design Specifications

Operating Conditions or Design Requirements

  • External dims.: W1000 x D300 x H1107mm

Selection Criteria for Main Components

  • Sheathed heater
    • Select a heater that can heat 90 liters water to 50° in 60min. Starting water temperature is 20°.

Design Evaluation

Verification of main components

  • Verify heater's required heat capacity.
  • Sheathed heater
    • Mass of the object to be heated: 90 kg
    • Specific heat of the object to be heated: 1.00 kcal/kg℃
    • Temperature rise: 50℃ - 20℃ = 30℃
    • Heating time: 1h
    • Efficiency (η): 0.5
    • Heat capacity required for the heater (kW) = heated object's mass (kg) x specific heat of the heated object (kcal/kg℃) x temperature (℃) / (860 x heating time (h) x efficiency (η)
      = 90 × 1.00 × (50 - 20) / (860 × 1 × 0.5) = 6.3kW
      Since the electrical power of one MSHPWP4 is 4kW, two heaters are needed.

Other Design Consideration

  • Heaters are accessed from the top for easy replacement and installation.

Explore Similar Application Examples

Page - / -

Part List

No. Part Name Sample Picture MISUMI Part Number
For Price and Days to ship click on Part No.
Quantity
1 Heaters MSHPW4 2
2 Joint Unit SUTNR25A 1
3 Low Pressure Pipe Fittings SUTPU25A 1
4 Screwed Steel Pipe Fitting SUTPEL25A 1
5 Steel Pipings SUTP25A-150 1
6 Joint BSFFA25A 1
7 Stainless U-Bolt UBSU8 1
8 Socket Head Cap Screws-with Washer SCBS5-15 2
9 Socket Head Cap Screws-with Washer SCBS5-25 8
10 Socket Head Cap Screws-with Washer SCBS6-15 8
11 Socket Head Cap Screws-with Washer SCBS8-20 18
  • The part list above only contains MISUMI parts.
    Part list download (CSV) includes MISUMI and third party components used in this example.
  • For price and shipping date see the Web Order System.
  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Download (Unit Assembly)

    CAD Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when you find interesting design tips.


    This data is utilized in order to list more useful application examples in the future.

    CAD Data Limitations

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. Unit assembly Data consists of some sub-assemblies.
      It is configured so that each sub-assembly unit can be used as it is or edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The dimensions of the MISUMI parts in the Data, which can be specifed at 1mm intervals, can be edited under historical data.
    6. The Data including the third-part components are made by the Company.

    Page top

Page top