ideanote
inCAD Library

Please read before use

What is inCAD Library?

  • Helpful application examples for mechanical engineers.

The Concept of inCAD Library

  • Online application library with a range of ideas for all manufacturing industries.
  • Save design time and learn new design applications when you are concepting new machines.

Disclaimer

  • MISUMI may not offer all parts in each application design. Available parts can only be purchased separately not as a unit shown in each application design.
  • MISUMI does not guarantee quality, accuracy, functionality, safety or reliability for the combination of the parts in each application example. Accept these points prior to use.
  • 2014 Copyright MISUMI
  • The data cannot be used for any purposes (including sales promotion) except for designing your machine.
  • All associated CAD is free. Misumi reserves the right at its sole discretion to cancel, terminate or modify this offer.
  • MISUMI may change, add or delete application examples posted without prior notice.
  • MISUMI assumes no responsibilities for any damage incurred resulting from your use of the Service or any change, addition or deletion by MISUMI of the application examples for any reason whatsoever.

inCAD Library Features

  1. Get great new design ideas for these application examples.
  2. Over 300 design application ideas
    collected from dozens of industries!

  3. Find application examples quickly! Search by function, workpiece shape, etc.

  4. Download the CAD models for each application example.
  5. Log in to download free CAD models.
    Download CAD for the entire application example!

Good IDEA! button

Click the Good IDEA! Button when you like an application example!

*Can only be clicked once per application example.

  • Upper right corner on the page of application example details

  • Pop-up dialog for CAD data downloading

Page top

Keyword Search
No. Search
SNS: 

No.000101 Rotary Indexing Fixture

Possible to temporarily fix rotational position.

Roller

Product name Rollers - With Baked-on Urethane/Rubber Liner, Metal Core - With Set Screw Threads 
Part number ROGAN60-15-30
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

The Urethane Lined roller type excels at transmitting rotary motion

Back to page top

Risk info.

It is recommended to pre-test the transmissibility of the roller

Back to page top

Available sizes

■Roller (Tapped type)

Material Surface treatment Hardness
Core material (Lining)
304 Stainless Steel - -
5052 Aluminum Alloy Clear anodize -
304 Stainless Steel Urethane Shore A90
5052 Aluminum Alloy
304 Stainless Steel Shore A70
5052 Aluminum Alloy
304 Stainless Steel Shore A50
5052 Aluminum Alloy

■Sizes and Dimensions

Shape O.D. Shaft bore DIA. (H7 mm) Length(mm)
Straight



Crowned
20 8 15-30(5 mm Increments)、40、50
25 8,10,12 15-30(5 mm Increments)、40、50
30 8,10,12,15 15-30(5 mm Increments)、40、50
35 10,12,15,20 20-30(5 mm Increments)、40、50
40 10,12,15,20 20-30(5 mm Increments)、40、50
50 12,15,20,25 25、30、40、50、100
60 12,15,20,25,30 30、40、50、100
80 15,20,25,30 40、50、100

Back to page top

Urethane molded bearing

Product name Silicon Rubber / Urethane Molded Bearings - Flat, with Threaded Shaft
Part number UMBGH15-40
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Small contact area for driven side roller.

Back to page top

Available sizes

■Urethane molded bearing

Material Hardness Color Bearing Shaft
Material Surface treatment
Urethane Shore A95 Black 52100 Bearing Steel Carbon Steel Electroless nickel plating
404C Stainless Steel 303 Stainless Steel -
White 52100 Bearing Steel Carbon Steel Trivalent Chromate
404C Stainless Steel 303 Stainless Steel -
Shore A90 Black 52100 Bearing Steel Carbon Steel Electroless nickel plating
404C Stainless Steel 303 Stainless Steel -
White 52100 Bearing Steel Carbon Steel Trivalent Chromate
404C Stainless Steel 303 Stainless Steel -
Shore A70 Black 52100 Bearing Steel Carbon Steel Electroless nickel plating
Shore A50 Black 52100 Bearing Steel Carbon Steel Electroless nickel plating
White 52100 Bearing Steel Carbon Steel Trivalent Chromate
Silicon rubber Shore A70 Lt. Gray 52100 Bearing Steel Carbon Steel Electroless nickel plating
404C Stainless Steel 303 Stainless Steel -
Anti-static urethane Shore A90 Gray 52100 Bearing Steel Carbon Steel Electroless nickel plating

■Sizes and Dimensions

Shaft bore DIA.(mm) O.D.(mm) Bearing used
3 10 W683ZZA
12
4 13 W684AX50ZZ
16 624ZZ
5 16 WBC5-13ZZ
20 625ZZ
6 20 696ZZ
28 626ZZ
8 28 608ZZ
30 608ZZ
10 30 6000ZZ
40 6200ZZ
15 40 6202ZZ
45 6202ZZ
20 45 6904ZZ
55 6204ZZ
25 65 6205ZZ

Back to page top

Performance info.

■Load capacity of urethane molded bearing

Shaft bore DIA.(mm) O.D.(mm) Urethane Silicon
Shore A95 Shore A90 Shore A70 Shore A50 Shore A70
3 10 38(3.8) 28(2.8) 9(0.9) 4(0.4) 7(0.7)
12 53(5.4) 34(3.5) 10(1) 6(0.6) 9.8(1)
4 13 66(6.7) 44(4.5) 13(1.3) 7(0.7) 13(1.3)
16 79(8.1) 59(6) 16(1.6) 6(0.6) 18(1.8)
5 16 79(8.1) 18(1.8)
20 102(10.4) 78(8) 20(2) 9(0.9) 24(2.4)
6 20 114(11.7) 23(2.3) 15(1.5)
28 218(22.2) 157(16) 44(4.5) 39(4) 47(4.8)
8 28 208(21.2) 42(4.3) 35(3.6)
30 - 176(18) 81(8.3) 65(6.7) 53(5.4)
10 30 94(9.6) 51(5.2)
40 - 274(28) 136(13.9) 93(9.5) 82(8.4)
15 40 122(12.4) 96(9.9)
45 - 343(35) 109(11.1) 102(10.5) 103(10.5)
20 45 130(13.3) 98(10.1)
55 - 490(50) 225(22.9) 176(18.1) 147(15)
25 65 - 750(70) 333(34) 250(25.8) 226(23)

Back to page top

Device stand

Product name Device Stands - Compact Flange, Pipe 
Part number MSFSBN10-150
Features Device Stand with compact flange
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

This device stand can support a camera. It is a low cost option.

Back to page top

Available sizes

■Device stand (Compact, w/through hole)

Post Bracket
Material Surface treatment Material Surface treatment
1045 Carbon Steel (Induction hardened) Electroless nickel plating 1045 Carbon Steel Low temp. black
chrome plating
1045 Carbon Steel
Black oxide
304 Stainless Steel -
1045 Carbon Steel (Induction hardened) Electroless nickel plating 1045 Carbon Steel Low temp. black
chrome plating
1045 Carbon Steel
304 Stainless Steel -
1045 Carbon Steel Black oxide 1045 Carbon Steel Black oxide
304 Stainless Steel - 304 Stainless Steel -

■Sizes and Dimensions

Post DIa.
(mm)
Length (1 mm increments) Flange O.D. Mounting hole DIa.
(mm) (mm)
6 50-150 38x20 4.5
8 50-200 38x20
10 50-250 40x22
12 50-300 46x24 5.5
15 75-350 56x29 6.6
20 75-400 63x34 6.6
25 75-450 78x41 9
30 100-450 82x46

Back to page top

Accuracy Info

■Accuracy of Device stand

Shaft DIa. Tolerance
(g6)
φ6 -0.004
-0.012
φ8 -0.005
-0.014
φ10
φ12 -0.006
-0.017
φ15
φ20 -0.007
-0.020
φ25
φ30

Back to page top

IDEA NOTE Fix Rotational Position

You can use a knurled knob and shaft collar to lock the roller's shaft in place. This will prevent the workpiece from rotating.

  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Download (Unit Assembly)

    CAD Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when you find interesting design tips.


    This data is utilized in order to list more useful application examples in the future.

    CAD Data Limitations

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. Unit assembly Data consists of some sub-assemblies.
      It is configured so that each sub-assembly unit can be used as it is or edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Page top

  • * Unit assembly Data consists of some sub-assemblies.
       It is configured so that each sub-assembly unit can be used as it is or edited.

Application Overview

Purpose

  • To rotate and affix cylindrical components in various positions to inspect the internal finish.
  • The workpiece is rotated by hand. This is useful when the workpiece is too heavy to lift.

Points for use

  • Use the clamp type shaft collar and knurled knob to lock the workpiece in place.
  • The rollers are lined with urethane to prevent damages to workpieces.

Target workpiece

  • Cylindrical workpiece
    External dims: φ72 x L280
    Workpiece weight: 2kg

Design Specifications

Operating Conditions or Design Requirements

  • External dimensions: W600 x D120 x H165

Selection Criteria for Main Components

  • Roller, Molded bearing
    • High friction coefficient Shore A70 urethane is selected for temporary retention.
    • Friction coefficient
      Shore A90 0.413~0.515, Shore A70 0.624~0.648, Shore A50 0.600~0.677
    • Friction coefficient
      Shore A79 0.514~0.572, Shore A50 0.504~0.528

Design Evaluation

Other Design Consideration

  • A knurled knob with a padded tip is used to retain roller rotation.

Explore Similar Application Examples

Page - / -

Part List

No. Part Name Sample Picture MISUMI Part Number
For Price and Days to ship click on Part No.
Quantity
1 Roller ROGAN60-15-30 2
2 Shaft Collars SSCMN15 1
3 Deep Groove Ball Bearings B6002ZZ 4
4 Hinge Pins SHCLSG15-73.0-E20-F35.5 1
5 Metal Washers FWSJJ-D20-V15-T3 4
6 Rotary Shaft SSFRRA15-65.0-B5-S5-FC25-G15 1
7 Urethane Mold Bearings UMBGH15-40 2
8 Knurled Knobs - with Tip Pad NOOSP5-20 1
9 Pull Handles UHFNS100 2
10 Camera Currently not available 1
11 Welded Steel Stands MSFSBN10-150 1
12 Super Compact Strut Clamps ALKCC10 2
13 Compact Strut Clamp AQMCC10 1
14 Post For Stand SMSTAM10-150 2
  • The part list above only contains MISUMI parts.
    Part list download (CSV) includes MISUMI and third party components used in this example.
  • For price and shipping date see the Web Order System.
  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Download (Unit Assembly)

    CAD Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when you find interesting design tips.


    This data is utilized in order to list more useful application examples in the future.

    CAD Data Limitations

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. Unit assembly Data consists of some sub-assemblies.
      It is configured so that each sub-assembly unit can be used as it is or edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Page top

Page top