(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

ideanote
inCAD Library

Please read before use

What is inCAD Library?

  • Helpful application examples for mechanical engineers.

The Concept of inCAD Library

  • Online application library with a range of ideas for all manufacturing industries.
  • Save design time and learn new design applications when you are concepting new machines.

Disclaimer

  • MISUMI may not offer all parts in each application design. Available parts can only be purchased separately not as a unit shown in each application design.
  • MISUMI does not guarantee quality, accuracy, functionality, safety or reliability for the combination of the parts in each application example. Accept these points prior to use.
  • 2014 Copyright MISUMI
  • The data cannot be used for any purposes (including sales promotion) except for designing your machine.
  • All associated CAD is free. Misumi reserves the right at its sole discretion to cancel, terminate or modify this offer.
  • MISUMI may change, add or delete application examples posted without prior notice.
  • MISUMI assumes no responsibilities for any damage incurred resulting from your use of the Service or any change, addition or deletion by MISUMI of the application examples for any reason whatsoever.

inCAD Library Features

  1. Get great new design ideas for these application examples.
  2. Over 300 design application ideas
    collected from dozens of industries!

  3. Find application examples quickly! Search by function, workpiece shape, etc.

  4. Download the CAD models for each application example.
  5. Log in to download free CAD models.
    Download CAD for the entire application example!

Good IDEA! button

Click the Good IDEA! Button when you like an application example!

*Can only be clicked once per application example.

  • Upper right corner on the page of application example details

  • Pop-up dialog for CAD data downloading

Page top

Keyword Search
No. Search
SNS: 

No.000071 Fixture for Different size Workpieces

Simplified fixturing mechanism capable of accommodating for different size workpieces.

Relevant category

Pivot pin

Product name Precision Pivot Pins - End Shape Selectable
Part number FCLEF-D8-L25-M4-MC5
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Extend length of existing toggle clamp arm.

Back to page top

Available sizes

■Precision Pivot Pins - End Shape Selectable (One end threaded - One end tapped)

Material Hardness Surface treatment
1045 Carbon Steel Black oxide
40〜45HRC
Electroless nickel plating
40〜45HRC
Plating hardness 750HV~ Hard chrome plating
Plating thickness 3μm or more
304 Stainless Steel
404C Stainless Steel 45〜50HRC
45〜50HRC
Plating hardness 750HV~
Hard chrome plating
Plating thickness 3μm or more

■Sizes and Dimensions

Pin DIA. Pin section length Thread Tap
(Configurable in 0.1mm increment) DIA. (Coarse) Length DIA. (Coarse) Hole depth
φ6 5.0~120.0 M3・M4・M5 Thread DIA.×2 M3 Tap DIA.×2
φ7 5.0~140.0 M3・M4・M5・M6 M3・M4
φ8 5.0~160.0 M3・M4・M5
φ9 5.0~180.0 M3・M4・M5・M6・M8 M3・M4・M5・M6
φ10 5.0~200.0
φ11 M3・M4・M5・M6・M8・M10 M3・M4・M5・M6・M8
φ12
φ13 M3・M4・M5・M6・M8・M10・M12 M3・M4・M5・M6・M8・M10
φ14
φ15 M3・M4・M5・M6・M8・M10・M12
φ16
φ17 M3・M4・M5・M6・M8・M10・M12・M16
φ18
φ19 M3・M4・M5・M6・M8・M10・M12・M16
φ20

Back to page top

Accuracy Info

■Pivot pin DIA. Tolerance (g6)

Pin DIA. Tolerance (mm)
φ6 -0.004/-0.012
φ7 -0.005/-0.014
φ8
φ9
φ10
φ11 -0.006/-0.017
φ12
φ13
φ14
φ15
φ16
φ17
φ18
φ19 -0.007/-0.020
φ20

Back to page top

Urethane Bumper

Product name Urethane Bumpers - Fully Configurable
Part number AXFY-D12-L10-V7
Features This product line Includes highly functional urethane bumpers like Vulkollan 6 times more abrasion-resistant than the standard urethane.
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Extra soft urethane, hardness Shore A30 to support floating clamping pad.

Back to page top

Risk info.

Depending on the variance of workpiece different hardness spacers might be needed.

Back to page top

Available sizes

■Urethane Bumper fully configurable type (w/Through hole)

Accuracy Material Hardness Color
Standard grade Standard urethane
(Ether-based polyurethane)
Shore A95 Natural color·Black
Shore A90
Standard urethane
(Ester-based polyurethane)
Shore A70
Shore A50
Shore A30
Antistatic polyurethane Shore A90 Gray
Shore A70
Shore A50
Low rebound urethane Shore A70 Gray
Heat resistant urethane Shore A90 Brown
Super abrasion resistant urethane Shore A92 Beige
Vulkollan ® Shore A68
Abrasion resistant urethane Shore A90 Dark brown
Shore A70
Ceramic urethane Shore A95 Gray
Shore A90
Shore A70
Precision grade Standard urethane
(Ether-based polyurethane)
Shore A95 Natural color·Black
Shore A90
Standard urethane
(Ester-based polyurethane)
Shore A70

■Sizes

O.D. Bore DIA. Length
Configure in 1mm increment
φ6〜φ15 φ2〜φ11 10〜300
φ16〜φ30 φ4〜φ26
φ31〜φ45 φ6〜φ41
φ46〜φ60 φ6〜φ56
φ61〜φ80 φ6〜φ76
φ81〜φ100 φ6〜φ86

* For 30 or less length, bore DIA.≦ O.D. -4
for over 30 length, bore DIA. ≦ O.D. -6

Back to page top

IDEA NOTE Compatible with different workpieces.

Fixture base plate includes slots for toggle clamp position adjustment.

IDEA NOTE Variation absorption mechanism

A floating urethane part mechanism can absorb workpiece variations.

IDEA NOTE Pivot pin is used as an extension rod.

A pivot pin with both ends configurable and length configurable in 0.1mm increments is used as an extension rod.

  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Download (Unit Assembly)

    CAD Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when you find interesting design tips.


    This data is utilized in order to list more useful application examples in the future.

    CAD Data Limitations

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. Unit assembly Data consists of some sub-assemblies.
      It is configured so that each sub-assembly unit can be used as it is or edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Page top

  • * Unit assembly Data consists of some sub-assemblies.
       It is configured so that each sub-assembly unit can be used as it is or edited.

Application Overview

Purpose

  • A fixture that can retain workpieces of different sizes.

Points for use

  • Manual mechanism by lever operation.
  • Toggle clamp position can be changed according to workpiece sizes by sliding the wing bolt in a slotted hole.

Target workpiece

  • Plastic boxes
    Sm. Workpiece dims.: W100 x D50 x H10 mm
    Lg. Workpiece dims. W100 x D200 x H100 mm

Design Specifications

Operating Conditions or Design Requirements

  • Slot stroke: 300mm
  • External dimensions W500 x D250 x H108 mm

Selection Criteria for Main Components

  • Wing bolts
    • Selected to make position adjustments easy for operator
  • Toggle clamp
    • Select the clamp with horizontal handle to match the direction of clamping.

Design Evaluation

Other Design Consideration

  • To utilize a toggle clamp for workpieces of different sizes, the toggle clamp can slide along a slotted hole.
  • Clamping pad includes urethane spacers.

Explore Similar Application Examples

Page - / -

Part List

No. Part Name Sample Picture MISUMI Part Number
For Price and Days to ship click on Part No.
Quantity
1 Leveling Mounts NFJN5-60 4
2 Wing Bolts CHBS6-12 2
3 Toggle Clamps MC03-1 1
4 Hinge Pins FCLEF-D8-L25-M4-MC5 1
5 Soft Urethane AXFY-D12-L10-V7-N 2
  • The part list above only contains MISUMI parts.
    Part list download (CSV) includes MISUMI and third party components used in this example.
  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Download (Unit Assembly)

    CAD Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when you find interesting design tips.


    This data is utilized in order to list more useful application examples in the future.

    CAD Data Limitations

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. Unit assembly Data consists of some sub-assemblies.
      It is configured so that each sub-assembly unit can be used as it is or edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Page top

Page top