(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Eccentric Cam Followers - For hex wrench, crowned. (CFFAP6-16)
- Volume Discount
- Spec Change
- Price Reduction
Crowned cam followers are used to keep the load evenly distributed if it is deflected or if there is any misalignment between the follower and the tracked surface. Since the stem is eccentric to the center of the cam follower, it is possible to fine adjust the position by turning the stem during assembly. Available in 52100 bearing steel. Options with or without seals. Maximum operating temperatures of 80°C.
- inCAD Components
Part Number
Configured Part Number is shown.
CFFAP6-16
[ ! ]For d10 and smaller sizes, no grease replenishing hole is provided.
[ ! ]Operating Temp.: 80°C or lower
[ ! ]Operating Temp.: 80°C or lower
| Shape | Type | [ M ]Material | [ A ]Accessories | |||
| Hex Socket on Head (d6 ~ 10) | Hex Socket on Head and Thread (d12 or more) | |||||
| No Seal | With Seal | No Seal | With Seal | |||
| Flat | CFAP | CFFAP | CFAPH | CFFAPH | 52100 Bearing Steel | Hex Nut 1 pc. (1045 Carbon Steel, Black Oxide) |
Specifications
| Part Number | - | D |
| CFAP8 | - | 19 |
| D | Tolerance |
| 16 | 0 - 0.008 |
| 19~30 | 0 - 0.009 |
| 32~47 | 0 - 0.011 |
| 52~80 | 0 - 0.013 |
| 85~90 | 0 - 0.015 |
| Part Number | D (Selectable) | MxPitch | ℓ | B | B1 | L | r | f (Min.) | H | e (Eccentricity) | Mass (g) | Max Tightening Torque (N·m) | Compliance with Standard | |||||
| Type | dh7 Tolerance | CFFAP | CFAP | CFFAPH | CFAPH | |||||||||||||
| (With Seal) CFFAP (No Seal) CFAP | 6 | 0 -0.012 | 16 | 6x1.0 | 9 | 11 | 12 | 28 | 0.5 | 11 | 3 | 0.25 | 18.5 | 2.94 | ● | ● | - | - |
| 8 | 0 -0.015 | 19 | 8x1.25 | 11 | 11 | 12 | 32 | 0.5 | 13 | 4 | 0.25 | 28.5 | 7.84 | ● | ● | - | - | |
| 10 | 0 -0.015 | 22 | 10x1.25 | 13 | 12 | 13 | 36 | 1 | 15 | 5 | 0.3 | 45 | 16.7 | ● | ● | - | - | |
| 10 | 0 -0.015 | 26 | 10x1.25 | 13 | 12 | 13 | 36 | 1 | 15 | 5 | 0.3 | 60 | 16.7 | ● | ● | - | - | |
| (With Seal) CFFAPH (No Seal) CFAPH | 12 | 0 -0.018 | 30 | 12x1.5 | 14 | 14 | 15 | 40 | 1.5 | 20 | 6 | 0.4 | 105 | 29.4 | - | - | ● | ● |
| 12 | 0 -0.018 | 32 | 12x1.5 | 14 | 14 | 15 | 40 | 1.5 | 20 | 6 | 0.4 | 115 | 29.4 | - | - | ● | ● | |
| 16 | 0 -0.018 | 35 | 16x1.5 | 18 | 18 | 19.5 | 52 | 1.5 | 24 | 6 | 0.5 | 205 | 70.6 | - | - | ● | ● | |
| 18 | 0 -0.018 | 40 | 18x1.5 | 20 | 20 | 21.5 | 58 | 1.5 | 26 | 6 | 0.6 | 295 | 98 | - | - | ● | ● | |
| 20 | 0 -0.021 | 47 | 20x1.5 | 22 | 24 | 25.5 | 66 | 1.5 | 36 | 8 | 0.7 | 450 | 137 | - | - | ● | ● | |
| 20 | 0 -0.021 | 52 | 20x1.5 | 22 | 24 | 25.5 | 66 | 1.5 | 36 | 8 | 0.7 | 525 | 137 | - | - | ● | ● | |
| 24 | 0 -0.021 | 62 | 24x1.5 | 25 | 29 | 30.5 | 80 | 1.5 | 40 | 8 | 0.8 | 915 | 245 | - | - | ● | ● | |
| 24 | 0 -0.021 | 72 | 24x1.5 | 25 | 29 | 30.5 | 80 | 1.5 | 40 | 8 | 0.8 | 1150 | 245 | - | - | ● | ● | |
| 30 | 0 -0.021 | 80 | 30x1.5 | 32 | 35 | 37 | 100 | 2 | 46 | 8 | 1 | 1880 | 480 | - | - | ● | ● | |
| 30 | 0 -0.021 | 85 | 30x1.5 | 32 | 35 | 37 | 100 | 2 | 46 | 8 | 1 | 1950 | 480 | - | - | ● | ● | |
| 30 | 0 - 0.021 | 90 | 30x1.5 | 32 | 35 | 37 | 100 | 2 | 46 | 8 | 1 | 2000 | 480 | - | - | ● | ● | |
Table1: Reference Data of Cam Followers| d-D | Standard | Heavy Load | |||||||||||||
| Basic Dynamic Load Rating C (kN) | Basic Static Load Rating Cor (kN) | Max. Allowable Load (kN) | Track Load Capacity(kN) | Max. Rotational Speed(rpm) | Mass (g) | Basic Dynamic Load Rating C (kN) | Basic Static Load Rating Cor (kN) | Max. Allowable Load (kN) | Track Load Capacity(kN) | Max. Rotational Speed with Seal (rpm) | Mass (g) | ||||
| (With Seal) | (No Seal) | ||||||||||||||
| Crowned | Flat | Crowned | Flat | ||||||||||||
| 3-10 | 1.47 | 1.18 | 0.36 | 0.37 | 1.37 | 32900 | 47000 | 4.5 | - | - | - | - | - | - | - |
| 4-12 | 2.06 | 2.05 | 0.78 | 0.47 | 1.76 | 25900 | 37000 | 7.5 | - | - | - | - | - | - | - |
| 5-13 | 3.14 | 2.77 | 1.42 | 0.53 | 2.25 | 20300 | 29000 | 10.5 | - | - | - | - | - | - | - |
| 6-16 | 3.59 | 3.58 | 2.11 | 1.08 | 3.43 | 17500 | 25000 | 18.5 | 6.94 | 8.5 | 2.11 | 1.08 | 3.43 | 7700 | 19 |
| 8-19 | 4.17 | 4.65 | 4.73 | 1.37 | 4.02 | 14000 | 20000 | 28.5 | 8.13 | 11.2 | 4.73 | 1.37 | 4.02 | 6090 | 29 |
| 10-22 | 5.33 | 6.78 | 5.81 | 1.67 | 4.7 | 11900 | 17000 | 45 | 9.42 | 14.3 | 5.81 | 1.67 | 4.7 | 5040 | 46 |
| 10-26 | 2.06 | 5.49 | 60 | 2.06 | 5.49 | 61 | |||||||||
| 12-30 | 7.87 | 9.79 | 9.37 | 2.45 | 7.06 | 9800 | 14000 | 105 | 13.4 | 19.8 | 9.37 | 2.45 | 7.06 | 4060 | 107 |
| 12-32 | 2.74 | 7.45 | 115 | 2.74 | 7.45 | 117 | |||||||||
| 16-35 | 12 | 18.3 | 17.3 | 3.14 | 11.2 | 7000 | 10000 | 205 | 20.6 | 37.6 | 17.3 | 3.14 | 11.2 | 3150 | 207 |
| 18-40 | 14.7 | 25.2 | 26.1 | 3.72 | 14.4 | 5950 | 8500 | 295 | 25.2 | 51.3 | 26.1 | 3.72 | 14.4 | 2660 | 300 |
| 20-47 | 20.7 | 34.8 | 32.1 | 7.15 | 21 | 4900 | 7000 | 450 | 33.2 | 64.8 | 32.1 | 7.15 | 21 | 2380 | 455 |
| 20-52 | 8.23 | 23.2 | 525 | 8.23 | 23.2 | 530 | |||||||||
| 24-62 | 30.6 | 53.2 | 49.5 | 10.5 | 34.2 | 4550 | 6500 | 915 | 46.7 | 92.9 | 49.5 | 10.5 | 34.2 | 2030 | 925 |
| 24-72 | 12.9 | 39.8 | 1150 | 12.9 | 39.8 | 1160 | |||||||||
| 30-80 | 45.4 | 87.6 | 73.7 | 14.9 | 52.6 | 3500 | 5000 | 1880 | 67.6 | 145 | 73.7 | 14.9 | 52.6 | 1610 | 1890 |
| 30-85 | 16.1 | 56 | 1950 | 16.1 | 56 | 1960 | |||||||||
| 30-90 | 17.3 | 59.3 | 2000 | 17.3 | 59.3 | 2010 | |||||||||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| CFFAP6-16 |
Loading...
More Information
[ ! ]As the stud (dh7) is eccentric to the center of the cam follower, it is possible to finely adjust the position by turning the stud when mounting.
Part Number Substitution Table for Cam Follower Standard Changes (d12, 16)
| Seal | Material | Old Part Number (Hex Socket on Head) |
New Part Number (Hex Socket on Head and Thread) |
| With Seal | 52100 Bearing Steel | CFFAP | CFFAPH |
| No Seal | CFAP | CFAPH |
Basic Information
| Category | Cam Followers | Roller Type | Flat Type | Material | 52100 Bearing Steel |
|---|---|---|---|---|---|
| Roller Lining | None | Cam Follower Type | Eccentric | Shaft | Provided |
| Unit | Metric Series | Roller Guiding Method | Retainer Type |
Please check the type/dimensions/specifications of the part CFFAP6-16 in the Eccentric Cam Followers - For hex wrench, crowned. series.
Specification/Dimensions
-
type
- CFAP
- CFAPH
- CFFAP
- CFFAPH
-
O.D. D(Ø)
-
Width B(mm)
-
Thread Size on Cam Follower (M)(mm)
-
Tightening Method
-
Hex Socket on Head -
Hex Socket on Thread Side
-
-
Allowable Rotational Speed(rpm)
-
Seals
- None
- Provided
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 8 Days or Less
- 11 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| CFAP8-19 |
| CFAPH12-30 |
| CFAPH12-32 |
| CFFAP8-19 |
| CFFAPH12-30 |
| CFFAPH12-32 |
Additional Products in this Category
- Cam Followers - Solid.
- Cam Followers - Threaded for grease fittings, flat.
- Cam Followers - CF-SFU Series.
- Standard Type Cam Followers - Full complement type, sealed type, CFVBUUR series.
- Inch Cam Followers - Caged and with flat screwdriver slot, with shields, CR series.
- Cam follower - Full complement type, with inner ring, NARTVR series.
- Cylindrical Roller Followers - Full complement type, with inner ring, NURT series.
- Cam Follower - Hexlube® Universal, Standard Stud, SL Series
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy