(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Strut Clamps - Selectable pitch, perpendicular type, same or different hole diameter.
- Degreasing
- Spec Change
Selectable shaft pitch between two posts for stands.
- METRIC
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
[ ! ]CB screws are included with the black oxide and black anodized products, and SCB screws are included with the other products.
| Type | [ M ]Material | [ S ]Surface Treatment | [ A ]Accessories | |
| Equal Dia., Perpendicular Configuration | Unequal Dia., Perpendicular Configuration | |||
| KMKC | KMKD | Low Carbon Steel | Black Oxide | Hex Socket Head Cap Screw |
| MMKC | MMKD | Electroless Nickel Plating | Hex Socket Head Cap Screw (Stainless Steel) | |
| AMKC | AMKD | Aluminum Alloy 6000 series | Black Anodize | Hex Socket Head Cap Screw |
| SMKC | SMKD | 304 Stainless Steel | - | Hex Socket Head Cap Screw (Stainless Steel) |
Specifications
| Part Number | - | D1 | - | P |
| KMKC10 MMKD20 | - | 15 | - - | 20 30 |
■Equal Dia., Perpendicular, Hole Pitch Selectable
| Part Number | P | A | B | C | E | H | S | M | d | |||||||||||
| Type | DH7 | |||||||||||||||||||
| KMKC MMKC AMKC SMKC | 6 | +0.012 0 | 10 | 15 | 20 | A=P+(2xE) | 10 | 10 | 12 | 7 | - | M4 | 4.5 | |||||||
| 8 | +0.015 0 | 10 | 15 | 20 | 25 | 12 | 12 | 14 | 8 | - | M5 | 5.5 | ||||||||
| 10 | 15 | 20 | 25 | 30 | 16 | 16 | 15 | 9 | - | |||||||||||
| 12 | +0.018 0 | 16 | 10 | - | ||||||||||||||||
| 15 | 20 | 25 | 30 | 40 | 22 | 22 | 18 | 12 | 11 | |||||||||||
| 20 | +0.021 0 | 25 | 30 | 40 | 50 | 28 | 28 | 22 | 15 | 14 | M6 | 6.6 | ||||||||
| 25 | 30 | 40 | 50 | 75 | 32 | 32 | 25 | 18 | 16 | |||||||||||
| 30 | 50 | 75 | 100 | 150 | 40 | 40 | 29 | 21 | 20 | M8 | 9 | |||||||||
| 35 | +0.025 0 | 45 | 45 | 32 | 24 | 24 | ||||||||||||||
| [ ! ]For the available sizes, refer to the price list. [ ! ]The tolerance and perpendicularity of DH7 is before slitting. [ ! ]For mating, g6, f8 shaft tolerances are recommended. Use of a long wrench is recommended for fastening. | ||||||||||||||||||||
■Unequal Dia. Perpendicular Pitch Selectable
| Part Number | D1H7 | P | A | B | C | E | G | H | K | S1 | S2 | M | d | ||||||||||||
| Type | DH7 | ||||||||||||||||||||||||
| KMKD MMKD AMKD SMKD | 8 | +0.015 0 | 6 | +0.012 0 | 10 | 15 | 20 | A=P+E+G | 12 | 9 | 13 | 12 | 8 | 7 | - | - | M4 | 4.5 | |||||||
| 10 | 8 | +0.015 0 | 15 | 20 | 25 | 16 | 12 | 15 | 14 | 9 | 8 | - | - | M5 | 5.5 | ||||||||||
| 12 | +0.018 0 | 10 | 15 | 20 | 25 | 30 | 16 | 16 | 16 | 15 | 10 | 9 | - | - | |||||||||||
| 15 | 22 | 18 | 18 | 15 | 12 | 10 | 11 | 9 | |||||||||||||||||
| 20 | +0.021 0 | 15 | +0.018 0 | 20 | 25 | 30 | 40 | 28 | 22 | 22 | 20 | 15 | 13 | 14 | 11 | M6 | 6.6 | ||||||||
| 25 | 25 | 30 | 40 | 50 | 32 | 25 | 25 | 20 | 18 | 13 | 16 | 14 | |||||||||||||
| 30 | 20 | +0.021 0 | 30 | 40 | 50 | 75 | 40 | 30 | 29 | 24 | 21 | 16 | 20 | 15 | M8 | 9 | |||||||||
| 35 | +0.025 0 | 25 | 50 | 75 | 100 | 150 | 45 | 35 | 32 | 27 | 24 | 19 | 24 | 20 | |||||||||||
| [ ! ]D Dimension for SMKD is available up to 30. [ ! ]D Dimension 8 is not available for AMKD and SMKD. [ ! ]The tolerance and perpendicularity of DH7, D1H7 are the tolerances before slitting. [ ! ]For mating, g6, f8 shaft tolerances are recommended. Use of a long wrench is recommended for fastening. | |||||||||||||||||||||||||
■ Included Screws
| D | Included Screw | |
| Equal Dia., Perpendicular Configuration | Unequal Dia., Perpendicular Configuration | |
| 6 | M4-10, 2 pcs. | - |
| 8 | M5-12, 2 pcs. | M4-8/M4-12, 1 pc. each |
| 10 | M5-15, 2 pcs. | M5-12/M5-10, 1 pc. each |
| 12 | M5-15, 2 pcs. | M5-20, 2 pcs. |
| 15 | M5-20, 4 pcs. | M5-20/M5-15, 2 pcs. each |
| 20 | M6-25, 4 pcs. | M6-25/M6-20, 2 pcs. each |
| 25 | M6-30, 4 pcs. | M6-30/M6-25, 2 pcs. each |
| 30 | M8-35, 4 pcs. | M8-35/M8-30, 2 pcs each |
| 35 | M8-40, 4 pcs. | M8-40/M8-35, 2 pcs. each |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| AMKC8-[10,15,20,25] |
| AMKC10-[15,20,25,30] |
| AMKC12-[15,20,25,30] |
| AMKC15-[20,25,30,40] |
| AMKC20-[25,30,40,50] |
| AMKC25-[30,40,50,75] |
| AMKC30-[50,75,100,150] |
| AMKD10-8-[15,20,25] |
| AMKD12-10-[15,20,25,30] |
| AMKD15-10-[15,20,25,30] |
| AMKD20-15-[20,25,30,40] |
| AMKD25-15-[25,30,40,50] |
| AMKD30-20-[30,40,50,75] |
| AMKD35-25-[50,75,100,150] |
| KMKC6-[10,15,20] |
| KMKC8-[10,15,20,25] |
| KMKC10-[15,20,25,30] |
| KMKC12-[15,20,25,30] |
| KMKC15-[20,25,30,40] |
| KMKC20-[25,30,40,50] |
| KMKC25-[30,40,50,75] |
| KMKC30-[50,75,100,150] |
| KMKC35-[50,75,100,150] |
| KMKD8-6-[10,15,20] |
| KMKD10-8-[15,20,25] |
| KMKD12-10-[15,20,25,30] |
| KMKD15-10-[15,20,25,30] |
| KMKD20-15-[20,25,30,40] |
| KMKD25-15-[25,30,40,50] |
| KMKD30-20-[30,40,50,75] |
| KMKD35-25-[50,75,100,150] |
| MMKC6-[10,15,20] |
| MMKC8-[10,15,20,25] |
| MMKC10-[15,20,25,30] |
| MMKC12-[15,20,25,30] |
| MMKC15-[20,25,30,40] |
| MMKC20-[25,30,40,50] |
| MMKC25-[30,40,50,75] |
| MMKC30-[50,75,100,150] |
| MMKC35-[50,75,100,150] |
| MMKD8-6-[10,15,20] |
| MMKD10-8-[15,20,25] |
| MMKD12-10-[15,20,25,30] |
| MMKD15-10-[15,20,25,30] |
| MMKD20-15-[20,25,30,40] |
| MMKD25-15-[25,30,40,50] |
| MMKD30-20-[30,40,50,75] |
| MMKD35-25-[50,75,100,150] |
| SMKC8-[10,15,20,25] |
| SMKC10-[15,20,25,30] |
| SMKC12-[15,20,25,30] |
| SMKC15-[20,25,30,40] |
| SMKC20-[25,30,40,50] |
| SMKC25-[30,40,50,75] |
| SMKD10-8-[15,20,25] |
| SMKD12-10-[15,20,25,30] |
| SMKD15-10-[15,20,25,30] |
| SMKD20-15-[20,25,30,40] |
| SMKD25-15-[25,30,40,50] |
| SMKD30-20-[30,40,50,75] |
Loading...
Basic Information
| Type | Perpendicular | Post Shape | Round |
|---|
Specification/Dimensions
-
Posts Dia.(mm)
-
Combined Posts Dia.
- Equal Dia.
- Unequal Dia.
-
Material
- Steel
- Stainless Steel
- Aluminum
-
Surface Treatment
- Electroless Nickel Plating
- Black Oxide Coating
- Black Anodize
- Not Provided
-
#2
-
#3
-
type
- AMKC
- AMKD
- KMKC
- KMKD
- MMKC
- MMKD
- SMKC
- SMKD
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 10 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Compact Strut Clamps - Perpendicular type, same or same or different hole diameter.
- Strut Clamps - Parallel type, different hole diameter, selectable pitch.
- Strut Clamp - Resin.
- Strut Clamps - Square and round, perpendicular configuration.
- Strut Clamps - Free Rotating, FCFA/FCFS series.
- Strut Clamp - For 13mm round shaft, perpendicular, square shaped.
- Strut Clamps - Same diameters, perpendicular.
- Strut Clamps - Same diameter hole, vertical and horizontal hole.
Complementary Products
MISUMI Unit Example related to this product
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy